
1.School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
xu565786@163.com (R.J.X.)
lch528@gdut.edu.cn (C.H.L.)
Scan for full text
Jia-Yi Xie, Yong-Shi Wu, Ze-Feng Yin, et al. Annealing of Oriented PP/PE Double-layer Film within the Melting Range of PE: the Role of Partial Melting and Self-nucleation. [J]. Chinese Journal of Polymer Science 40(4):403-412(2022)
Jia-Yi Xie, Yong-Shi Wu, Ze-Feng Yin, et al. Annealing of Oriented PP/PE Double-layer Film within the Melting Range of PE: the Role of Partial Melting and Self-nucleation. [J]. Chinese Journal of Polymer Science 40(4):403-412(2022) DOI: 10.1007/s10118-022-2681-9.
Due to the mechanical stability of the PP layer, the oriented PP/PE double-layer film with a row-nucleated crystalline structure can be annealed at a higher temperature than the PE monolayer film. In this work, the effects of annealing temperature within the melting range of PE on the crystalline structure and properties of PP/PE double-layer films were studied. When the annealing temperature is between 100 and 130 °C, below the melting point of PE, the crystallinity, the long period, lateral dimension and orientation of the lamellae in the PE layer increase with the annealing temperature due to the melting of thin lamellae and the self-nucleated effect of partially-melted melts during annealing. With the annealing temperature further increasing to 138 °C, near the melting ending point of PE, since the lamellae melt completely and the melt memory becomes weak during annealing, some spherulite structures are formed in the annealed sample, resulting in a decrease of orientation. In contrast, the annealing only causes the appearance of a low-temperature endothermic plateau in the PP layer. The improved size and orientation of lamellar structure in the PE layer increase the pore arrangement and porosity of the stretched PP/PE microporous membrane. This study successfully applies the self-nucleation effect of partially-melted polymer melt into the practical annealing process, which is helpful to guide the production of high-performance PP/PE/PP lithium batteries separator and the annealing process of other multilayer products.
Annealing temperatureCrystalline structureOriented PP/PE double-layer films
McHugh, A . The role of polymer membrane formation in sustained release drug delivery systems . J. Control. Release , 2005 . 109 211 -221 . DOI:10.1016/j.jconrel.2005.09.038http://doi.org/10.1016/j.jconrel.2005.09.038 .
Venugopal, G.; Moore, J.; Howard, J.; Pendalwar, S . Characterization of microporous separators for lithium-ion batteries . J. Power Sources , 1999 . 77 34 -41 . DOI:10.1016/S0378-7753(98)00168-2http://doi.org/10.1016/S0378-7753(98)00168-2 .
Dahn, J.; Fuller, E.; Obrovac, M.; Von Sacken, U . Thermal stability of LixCoO2, LixNiO2 and λ-MnO2 and consequences for the safety of Li-ion cells . Solid State Ionics , 1994 . 69 265 -270 . DOI:10.1016/0167-2738(94)90415-4http://doi.org/10.1016/0167-2738(94)90415-4 .
Chen, W.; Wu, G.; Chu, J.; Zhang, Y.; Yang, M . Novel method for fabrication of PP/HDPE/PP trilayer microporous membrane with a highly orientated structure . J. Appl. Polym. Sci. , 2019 . 136 47249 DOI:10.1002/app.47249http://doi.org/10.1002/app.47249 .
Tabatabaei, S. H.; Carreau, P. J.; Ajji, A . Microporous membranes obtained from PP/HDPE multilayer films by stretching . J. Membr. Sci. , 2009 . 345 148 -159 . DOI:10.1016/j.memsci.2009.08.038http://doi.org/10.1016/j.memsci.2009.08.038 .
Cai, Q.; Xu, R. J.; Wu, S. Q.; Chen, C. B.; Mo, H. B.; Lei, C. H.; Li, L. B.; Li, Z. H . Influence of annealing temperature on the lamellar and connecting bridge structure of stretched polypropylene microporous membrane . Polym. Int. , 2015 . 64 446 -452 . DOI:10.1002/pi.4828http://doi.org/10.1002/pi.4828 .
Chen, C. B.; Lei, C. H.; Cai, Q.; Mo, H. B.; Xu, R. J . Influence of annealing time on the structure and properties of high-density polyethylene microporous membrane . J. Plast. Film Sheet. , 2015 . 31 78 -95 . DOI:10.1177/8756087914533563http://doi.org/10.1177/8756087914533563 .
Saffar, A.; Ajji, A.; Carreau, P. J.; Kamal, M. R . The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes . Polymer , 2014 . 55 3156 -3167 . DOI:10.1016/j.polymer.2014.05.017http://doi.org/10.1016/j.polymer.2014.05.017 .
Hedesiu, C.; Demco, D.; Kleppinger, R.; Poel, G . V.; Gijsbers, W.; Blümich, B.; Remerie, K.; Litvinov, V. Effect of temperature and annealing on the phase composition, molecular mobility, and the thickness of domains in isotactic polypropylene studied by proton solid-state NMR, SAXS, and DSC . Macromolecules , 2007 . 40 3977 -3989 . DOI:10.1021/ma070014qhttp://doi.org/10.1021/ma070014q .
Bai, H.; Deng, H.; Zhang, Q.; Wang, K.; Fu, Q.; Zhang, Z.; Men, Y . Effect of annealing on the microstructure and mechanical properties of polypropylene with oriented shish-kebab structure . Polym. Int. , 2012 . 61 252 -258 . DOI:10.1002/pi.3180http://doi.org/10.1002/pi.3180 .
Han, L.; Li, X.; Li, Y.; Huang, T.; Wang, Y.; Wu, J.; Xiang, F . Influence of annealing on microstructure and physical properties of isotactic polypropylene/calcium carbonate composites with β-phase nucleating agent . Mat. Sci. Eng. A , 2010 . 527 3176 -3185 . DOI:10.1016/j.msea.2010.01.069http://doi.org/10.1016/j.msea.2010.01.069 .
Gu, X.; Zhou, M.; Wang, Y.; Zhang, J . Influence of annealing on the morphology and mechanical properties of iPP/HDPE blend with tailored oriented crystalline structures . J. Polym. Res. , 2019 . 26 1 -11 . DOI:10.1007/s10965-018-1657-5http://doi.org/10.1007/s10965-018-1657-5 .
Ding, Z.; Bao, R.; Zhao, B.; Yan, J.; Liu, Z.; Yang, M . Effects of annealing on structure and deformation mechanism of isotactic polypropylene film with row-nucleated lamellar structure . J. Appl. Polym. Sci. , 2013 . 130 1659 -1666 . DOI:10.1002/app.39351http://doi.org/10.1002/app.39351 .
Lee, S. Y.; Park, S. Y.; Song, H. S . Effects of melt-extension and annealing on row-nucleated lamellar crystalline structure of HDPE films . J. Appl. Polym. Sci. , 2007 . 103 3326 -3333 . DOI:10.1002/app.25495http://doi.org/10.1002/app.25495 .
Lee, S. Y.; Park, S. Y.; Song, H. S . Lamellar crystalline structure of hard elastic HDPE films and its influence on microporous membrane formation . Polymer , 2006 . 47 3540 -3547 . DOI:10.1016/j.polymer.2006.03.070http://doi.org/10.1016/j.polymer.2006.03.070 .
Gray, A. P . Polymer crystallinity determinations by DSC . Thermochim. Acta , 1970 . 1 563 -579 . DOI:10.1016/0040-6031(70)80008-9http://doi.org/10.1016/0040-6031(70)80008-9 .
Crist, B . Microfibril dimensions from small-angle X-ray scattering . J. Appl. Crystallogr. , 1979 . 12 27 -33 . DOI:10.1107/S0021889879011717http://doi.org/10.1107/S0021889879011717 .
Tang, Y.; Jiang, Z.; Men, Y.; An, L.; Enderle, H. F.; Lilge, D.; Roth, S . V.; Gehrke, R.; Rieger, J., Uniaxial deformation of overstretched polyethylene: in-situ synchrotron small angle X-ray scattering study . Polymer , 2007 . 48 5125 -5132 . DOI:10.1016/j.polymer.2007.06.056http://doi.org/10.1016/j.polymer.2007.06.056 .
Hashimoto, T.; Nagatoshi, K.; Todo, A.; Kawai, H . Deformation mechanism of ‘hard elastic polyethylene films’ . Polymer , 1976 . 17 1063 -1074 . DOI:10.1016/0032-3861(76)90008-2http://doi.org/10.1016/0032-3861(76)90008-2 .
Lei, C.; Xu, R.; Tian, Z.; Huang, H.; Xie, J.; Zhu, X . Stretching-induced uniform micropores formation: an in situ SAXS/WAXS study . Macromolecules , 2018 . 51 3433 -3442 . DOI:10.1021/acs.macromol.7b02335http://doi.org/10.1021/acs.macromol.7b02335 .
Lin, Y.; Li, X.; Meng, L.; Chen, X.; Lv, F.; Zhang, Q.; Li, L . Stress-induced microphase separation of interlamellar amorphous phase in hard-elastic isotactic polypropylene film . Polymer , 2018 . 148 79 -92 . DOI:10.1016/j.polymer.2018.06.009http://doi.org/10.1016/j.polymer.2018.06.009 .
Xu, R.; Chen, X.; Cai, Q.; Chen, C.; Lin, Y.; Lei, C.; Li, L . In situ study of the annealing process of a polyethylene cast film with a row-nucleated crystalline structure by SAXS . RSC Adv. , 2015 . 5 27722 -27734 . DOI:10.1039/C5RA00659Ghttp://doi.org/10.1039/C5RA00659G .
Li, X.; Lin, Y.; Ji, Y.; Meng, L.; Zhang, Q.; Zhang, R.; Zhang, W.; Li, L . Strain and temperature dependence of deformation mechanism of lamellar stacks in HDPE and its guidance on microporous membrane preparation . Polymer , 2016 . 105 264 -275 . DOI:10.1016/j.polymer.2016.10.043http://doi.org/10.1016/j.polymer.2016.10.043 .
Xu, R.; Chen, X.; Xie, J.; Cai, Q.; Lei, C . Influence of melt-draw ratio on the crystalline structure and properties of polypropylene cast film and stretched microporous membrane . Ind. Eng. Chem. Res. , 2015 . 54 2991 -2999 . DOI:10.1021/acs.iecr.5b00215http://doi.org/10.1021/acs.iecr.5b00215 .
Yadegari, A.; Morshedian, J.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G . Influence of precursor film microstructure on properties of HDPE microporous membranes prepared by stretching . J. Appl. Polym. Sci. , 2017 . 134 .
Sangroniz, L.; Cavallo, D.; Müller, A. J . Self-nucleation effects on polymer crystallization . Macromolecules , 2020 . 53 4581 -4604 . DOI:10.1021/acs.macromol.0c00223http://doi.org/10.1021/acs.macromol.0c00223 .
Lorenzo, A. T.; Arnal, M. L.; Sanchez, J. J.; Müller, A. J . Effect of annealing time on the self-nucleation behavior of semicrystalline polymers . J. Polym. Sci., Part B: Polym. Phys. , 2006 . 44 1738 -1750 . DOI:10.1002/polb.20832http://doi.org/10.1002/polb.20832 .
Fillon, B.; Wittmann, J.; Lotz, B.; Thierry, A . Self-nucleation and recrystallization of isotactic polypropylene (α phase) investigated by differential scanning calorimetry . J. Polym. Sci., Part B: Polym. Phys. , 1993 . 31 1383 -1393. .
0
Views
4
Downloads
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621