Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay

Ye Lei; Ren Jie; Cai Shen-yang; Wang Zhi-gang; Li Jian-bo

doi:10.1007/s10118-016-1799-z

Your Location：

Home >

Browse articles >

Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay

Papers | Updated：2022-02-21

- Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay
- Vol. 34, Issue 6, Pages: 785-796(2016)
- Affiliations：
  
  a.Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, School of Materials Science and Engineering, Tongji University, Shanghai 200092, China
  b.Institute of Nano and Bio-Polymeric Materials, School of Material Science and Engineering, Tongji University, Shanghai 201804, China
- Author bio：
  
  Jie Ren (任杰), E-mail: renjie6598@163.com
  Jian-bo Li (李建波), E-mail: lijianbo@tongji.edu.cn
- Funds：
  
  the National Natural Science Foundation of China;the Shanghai Automotive Industry Science and Technology Development Foundation
- DOI：10.1007/s10118-016-1799-z
  CLC：
Scan for full text
Ye Lei, Ren Jie, Cai Shen-yang, et al. Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay. [J]. 34(6):785-796(2016)
DOI：

Ye Lei, Ren Jie, Cai Shen-yang, et al. Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay. [J]. 34(6):785-796(2016) DOI： 10.1007/s10118-016-1799-z.

摘要

Abstract

To minimize the loading level of the char-forming phosphorus based flame retardants in the poly(lactic acid) (PLA) with reduced flammability, we have developed the flame-retarded PLA nanocomposites by melt blending method incorporating organically modified montmorillonite (OMMT) and aluminium diethylphosphinate (AlPi) additives. The influence of AlPi and OMMT on flame retardancy and thermal stability of PLA was thoroughly investigated by means of the limiting oxygen index (LOI), UL94 test, cone calorimeter, X-ray diffraction (XRD), thermogravimetric analysis and scanning electronic microscopy (SEM). The experimental results show that the PLA/AlPi/OMMT system has excellent fire retardancy. The LOI value increases from 19% for pristine PLA to 28% for the flame-retarded PLA. Cone calorimeter analysis of the PLA/AlPi/OMMT exhibits a reduction in the peak heat release rate values by 26.2%. Thermogravimetric analysis and SEM of cone calorimeter residues indicate that OMMT significantly enhances the thermal stability, promotes char-forming and suppresses the melt dripping. The research of this study implies that the combining of the flame retardant and organoclay results in a synergistic effect. In addition, the flame-retarded PLA nanocomposite also exhibits notable increase in the impact strength and the elongation at break.

关键词

Keywords

Polylactic acidFlame retardancyNanocompositePhosphinatesMontmorillonite

references

K. Fukushima, , M. Murariu, , G Camino, , P. Dubois, . Polym. Degrad. Stab. , 2010 . 95 (6 ):1063 .

J. Ren, , Z.H. Zhang, , Y. Feng, , J.B Li, , W.Z. Yuan, . J. Appl. Polym. Sci. , 2010 . 118 (5 ):2650 .

Ren, J., "Biodegradable Poly(lactic acid): Synthesis, Modification, Processing and Applications", Springer Berlin Heidelberg, Berlin, 2010, p.54

P. Ding, , B. Kang, , J. Zhang, , J.W. Yang, , N. Song, , S.F Tang, , L.Y. Shi, . J. Colloid Interf. Sci. , 2015 . 440 46 .

D.M. Fox, , M. Novy, , K. Brown, , M. Zammarano, , R.H. Jr. Harris, , M. Murariu, , E.D. McCarthy, , J.E Seppala, , J.W. Gilman, . Polym. Degrad. Stab. , 2014 . 106 54 .

Q.F Wang, , W.F. Shi, . Polym. Degrad. Stab. , 2006 . 91 (6 ):1289 .

H.J. Lin, , L.J. Han, , X.M. Wang, , Y.J Bian, , Y.S. Li, . Polym. Adv. Technol. , 2013 . 24 (6 ):576 .

J. Deng, , S.W Zhu, , W.F. Shi, . J. Appl. Polym. Sci. , 2004 . 94 (5 ):2065 .

X. Chen, , J Zhuo, , C. Jiao, . Polym. Degrad. Stab. , 2012 . 97 (11 ):2143 .

X. Chen, , C. Jiao, , S Li, , J. Sun, . J. Polym. Res. , 2011 . 18 (6 ):2229 .

D. Chen, , J Li, , J. Ren, . Polym. Int. , 2011 . 60 (4 ):599 .

G. Tang, , X. Wang, , R. Zhang, , B.B. Wang, , N.N. Hong, , Y. Hu, , L Song, , X.L. Gong, . Ind. Eng. Chem. Res. , 2013 . 52 (22 ):7362 .

G. Tang, , X. Wang, , W.Y. Xing, , P. Zhang, , B.B. Wang, , N.N. Hong, , W. Yang, , Y Hu, , L. Song, . Ind. Eng. Chem. Res. , 2012 . 51 (37 ):12009 .

G. Tang, , X.J. Huang, , H.C. Ding, , X. Wang, , S.D. Jiang, , K.Q. Zhou, , B.B. Wang, , W Yang, , Y. Hu, . RSC Advances , 2014 . 4 (18 ):8985 .

A. Lorenzetti, , S. Besco, , D. Hrelja, , M. Roso, , E. Gallo, , B Schartel, , M. Modesti, . Polym. Degrad. Stab. , 2013 . 98 (11 ):2366 .

J.B. Dahiya, , N Kumar, , H. Bockhorn, . Fire. Mater. , 2014 . 38 (1 ):1 .

E. Gallo, , U. Braun, , B. Schartel, , P Russo, , D. Acierno, . Polym. Degrad. Stab. , 2009 . 94 (8 ):1245 .

U Braun, , B. Schartel, . Macromol. Mater. Eng. , 2008 . 293 (3 ):206 .

A Ramani, , A.E. Dahoe, . Polym. Degrad. Stab. , 2014 . 105 1 .

S. Bourbigot, , F. Samyn, , T Turf, , S. Duquesne, . Polym. Degrad. Stab. , 2010 . 95 (3 ):320 .

F Samyn, , S. Bourbigot, . Polym. Degrad. Stab. , 2012 . 97 (11 ):2217 .

A. Vannier, , S. Duquesne, , S Bourbigot, , J. Alongi, . Thermochim. Acta , 2009 . 495 (1-2 ):155 .

J. Alongi, . Fiber. Polym. , 2011 . 12 (2 ):166 .

T.D Hapuarachchi, , T. Peijs, . Compos. Part. A-Appl. S. , 2010 . 41 (8 ):954 .

M.F. Chiang, , M.Z Chu, , T.M. Wu, . Polym. Degrad. Stab. , 2011 . 96 (1 ):60 .

P. Wei, , S Bocchini, , G. Camino, . Eur. Polym. J. , 2013 . 49 (4 ):932 .

M. Murariu, , A.L. Dechief, , L. Bonnaud, , Y. Paint, , A. Gallos, , G. Fontaine, , S Bourbigot, , P. Dubois, . Polym. Degrad. Stab. , 2010 . 95 (5 ):889 .

S. Solarski, , F. Mahjoubi, , M. Ferreira, , E. Devaux, , P. Bachelet, , S. Bourbigot, , R. Delobel, , P. Coszach, , M. Murariu, , A.D. Ferreira, , M. Alexandre, , P Degee, , P. Dubois, . J. Mater. Sci. , 2007 . 42 (13 ):5105 .

K.C. Cheng, , C.B. Yu, , W.J. Guo, , S.F. Wang, . Carbo. Polym. , 2012 . 87 (2 ):1119 .

X. Wang, , Y.A. Hu, , L. Song, , S.Y. Xuan, , W.Y. Xing, , Z.M Bai, , H.D. Lu, . Ind. Eng. Chem. Res , 2011 . 50 (2 ):713 .

M. Zanetti, , G Camino, , R. Mulhaupt, . Polym. Degrad. Stab. , 2001 . 74 (3 ):413 .

J.W. Gilman, . Appl. Clay. Sci. , 1999 . 15 (1-2 ):31 .

A.B. Morgan, . Polym. Adv. Technol. , 2006 . 17 (4 ):206 .

P Kiliaris, , C.D. Papaspyrides, . Prog. Polym. Sci. , 2010 . 35 (7 ):902 .

A. Fina, , F Cuttica, , G. Camino, . Polym. Degrad. Stab. , 2012 . 97 (12 ):2619 .

M., J. Polym. Sci. Pluta, . Part B: Polym. Phys. , 2006 . 44 (23 ):3392 .

F.D. Kopinke, , M. Remmler, , K Mackenzie, , M. Moder, . Polym. Degrad. Stab. , 1996 . 53 (3 ):329 .

H.L. Qin, , S.M. Zhang, , C.G. Zhao, , G.J Hu, , M.S. Yang, . Polymer , 2005 . 46 (19 ):8386 .

B.M. Alexander, . Polym. Adv. Technol. , 2006 . 17 (10 ):206 .

U. Braun, , H. Bahr, , H Sturm, , B. Schartel, . Polym. Adv. Technol. , 2008 . 19 (6 ):680 .

U. Braun, , B. Schartel, , M.A Fichera, , C. Jaeger, . Polym. Degrad. Stab. , 2007 . 92 (8 ):1528 .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

DISPERSION OF GRAPHENE OXIDE AND ITS FLAME RETARDANCY EFFECT ON EPOXY NANOCOMPOSITES

Dry-spun Polyimide Fibers with Excellent Thermal Stability, Intrinsic Flame Retardancy and Ultralow Smoke Release

Flame-retardant and Self-healing Biomass Aerogels Based on Electrostatic Assembly

A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites

Related Author

No data

Related Institution

Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering J07, The University of Sydney

State Key Laboratory of Chemical Resource Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology

Beijing Key Laboratory on Preparation and Processing of Novel Polymeric Materials, Department of Polymer Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology

Jiangsu New Vision Advanced Functional Fiber Innovation Center Co., Ltd.

State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University

⁰