Matthew M.Yonkey Dillip K.Mohanty Department of Chemistry, Central Michigan University, Mt.Pleasant, et al. CROSS-LINKING OF AROMATIC POLY(THIOETHER)S. [J]. (5):509-517(2007)
DOI:
Matthew M.Yonkey Dillip K.Mohanty Department of Chemistry, Central Michigan University, Mt.Pleasant, et al. CROSS-LINKING OF AROMATIC POLY(THIOETHER)S. [J]. (5):509-517(2007)DOI:
<正>A novel cross-linking process using two high molecular weight aromatic poly(thioether)s,which were synthesized by the reactions of 4,4′-thiobisbenzenethiol with 4,4′-difluorobenzophenone and 4,4′-difluorodiphenylsulfone,respectively, and commercially available lower molecular weight poly(p-phenylene sulfide)was investigated.These reactions were carried out in bulk by the addition of silver tetrafluroborate andα,α′-dibromo-p-xylene at 190℃over a period of 45 min. Furthermore,the same procedure could be modified to cross-link compression-molded films of these three polymers.The thermal and solubility behaviors of these polymers before and after cross-linking reactions,are presented.正>
Abstract
A novel cross-linking process using two high molecular weight aromatic poly(thioether)s,which were synthesized by the reactions of 4,4′-thiobisbenzenethiol with 4,4′-difluorobenzophenone and 4,4′-difluorodiphenylsulfone,respectively, and commercially available lower molecular weight poly(p-phenylene sulfide)was investigated.These reactions were carried out in bulk by the addition of silver tetrafluroborate andα,α′-dibromo-p-xylene at 190℃over a period of 45 min. Furthermore,the same procedure could be modified to cross-link compression-molded films of these three polymers.The thermal and solubility behaviors of these polymers before and after cross-linking reactions,are presented.