Perylene bisimide-based polymers and small molecules featuring node-linkages exhibit versatile optoelectronic and redox functionalities, enabling promising applications in photocatalysis, molecular qubits, ambipolar energy storage, lithium-ion batteries, and multicolor electrochromic devices.
This review summarizes recent advances in injectable polymeric hemostats for non-compressible hemorrhage, including hydrogels, gelable powders, and expandable materials, highlighting material design, hemostatic mechanisms, performance characteristics, and remaining challenges.
Chalcogen engineering of non-fullerene acceptor (NFA) side chains modulates intramolecular charge transfer (ICT), dielectric constant, and aggregation, improving morphology and performance. Se substitution enables additive-free ternary organic solar cells (OSCs) with 20.58% PCE, highlighting a powerful strategy.
A synergistic spring-entanglement network combines the click-derived covalent network with topological stress delocalization, yielding a stretchable, low-hysteresis ion-conductive elastomer with rapid recovery and stable drift-free performance over 104 cycles.
A structurally simple fluorinated polythiophene donor P3T2F-DT with a fluorinated conjugated backbone was developed for efficient all-polymer solar cells (all-PSCs). By optimizing the alkyl side-chain branching point, P3T2F-DT exhibited controllable aggregation behavior, improved crystallinity, and delivered a record efficiency of 15.64% with a fill factor of 76.02% for the PT-based all-PSCs.
A systematic strategy for the fine-structure characterization of perhydropolysilazane (PHPS) is established. By introducing structural parameters—degree of branching and number of cyclization—the complex molecular structure of PHPS is quantitatively resolved, providing a robust framework for its detailed structural elucidation.
In this study, PCMVImTf2N/Ti2C composite membranes were used to achieve efficient dye separation. The membranes at higher loading levels exhibited retention rates for four dyes: Rhodamine B, Methyl orange, Methylene blue, and Methyl red, while maintaining a high water flux.
A simultaneous in situ GIWAXS/GISAXS/UV-Vis platform was developed to track multiscale film-formation kinetics, including molecular aggregation, nucleation, crystallization, and phase separation, during the blade coating of organic solar cells. The shearing speed was found to regulate morphology evolution and device performance.
Propylene-based elastomer (PBE) and calcium phthalate (CaPh) exhibited a synergistic effect, significantly enhancing the impact property and crystallization behavior of polypropylene (PP): the impact strength increased to 50.9 kJ/m2, and the relative β-crystal content reached 87.1%.
Quantitative analysis using confocal Raman spectroscopy revealed skin-core heterogeneity in the Kevlar fibers, where the crystallinity in the core region was significantly higher than that in the skin.
Chemoselective ring-opening copolymerization of CO2-derived substituted δ-valerolactones was achieved under mild conditions, yielding recyclable copolymers with a CO2 content of 21 wt%. The resulting polyesters possess reactive double bonds for post-polymerization modification. Upon UV irradiation, crosslinked networks with considerable fluorescence and mechanical properties are formed.
Seven naphthalene carboxylic acid derivatives (Nap-nCOOH) were successfully realized to exhibit room temperature phosphorescence (RTP) in PVA films. The phosphorescence behavior of 2-NapCOOH@PVA in response to water and heat stimuli, as well as the unique excitation-wavelength-dependent and time-dependent afterglow of 1,4,5,8-Nap4COOH@PVA, were systematically investigated.
A novel synergistic structure (GNS-LDH) was synthesized by modifying graphene with layered double hydroxide hybrids via hydrothermal method. The introduction of GNS-LDH imparted ABS with enhancement and toughening, flame retardancy and smoke suppression, and a reduction in toxicity, which promoted char formation, reducing volatile gas escape and achieving flame retardancy.
The crosslinked gel polymer electrolyte forms hydrogen bonds with the silicon anode, effectively stabilizing high-mass-loading silicon electrodes for high-energy-density Li-ion batteries.
A sandwich electrospun separator with a thermal self-closing was fabricated. UiO-66@PDA modification boosts wettability, ionic conductivity, and cycling stability, effectively suppressing lithium dendrites and thermal runaway.
Self-repairing low-modulus icephobic covalent adaptable networks (CANs) are developed for large-scale deicing applications. The low ice adhesion strength is achieved by varying the molecular weight of polydimethylsiloxane (PDMS) precursor, cross-linker amount and oil content.
Chiral polyurethane (BPU) containing binaphthol (BINOL) groups in the main chain was prepared. By introducing specific small-molecule doping into this system, a significant non-reciprocal chiroptical response can be induced in the BPU. Through removal of excess doped small molecules and control experiments, this study successfully demonstrated that small-molecule doping is the core cause of the nonreciprocal chiroptical response in the BPU system.
A high-internal-phase emulsion-templated fluoropolymer framework enables the stable immobilization of hydrophilic phosphomolybdic acid while preserving hierarchical roughness, yielding a monolithic coating with durable superhydrophobicity and reversible photochromic performance for UV sensing and information encryption.
Heat-, light-, and humidity-responsive polyurethanes were developed by incorporating azobenzene into crystallizable soft segments. Cold-drawing stores entropic elastic energy, which is released upon heating, UV irradiation (via the photothermal effect), or moisture, driving distinct bending behaviors. This molecular design and post-processing synergy enabled the development of advanced multi-stimuli-responsive actuators.
Polyurethane (PU) foam waste was depolymerized using microwave-assisted glycolysis with a polyol (MPD) and NaOH catalyst under optimized conditions (PUF:MPD = 1:3, 190 °C, 3% NaOH) to produce oligomers. These oligomers were then reacted with adipic acid, neopentyl glycol, and phthalic anhydride to synthesize a recycled polyester polyol, which was subsequently used to prepare the polyurethane coatings.
This study introduces a silicone-contained pressure-sensitive adhesive synthesized by crosslinking thermo-responsive poly(ethylene glycol-co-siloxane) with trimethylol-propane triacrylate and a chitosan tackifier. This adhesive offers strong skin adhesion at 37 °C and enables on-demand, rapid detachment by either heating to 60 °C or cooling to 0 °C.
This work employed electrospinning technology to construct a novel Boehmite/polyacrylonitrile (BM/PAN) composite nanofiber separator and investigated the effects of varying BM content on the separator's structure and electrochemical performance.
A segmented copolymer, polycaprolactone-r-polylactide (PCL-r-PLLA), containing unsaturated carbon–carbon double bonds, was synthesized to toughen PLA through an in situ branching/crosslinking reaction. Transparent PLA/PCL-r-PLLA composites with balanced toughness-stiffness performances were obtained. The elongation at break increased to 116%, while the tensile strength decreased by only 20% compared with that of PLA.
Based on the latest theoretical analysis of ternary solution thermodynamics, the tie lines within the polymer solvent composition plane of a poly(N-isopropylacrylamide) water/methanol co-nonsolvency system were quantitatively determined experimentally. The orientation of these tie lines exhibits a positive slope, providing positive evidence to support the mechanism of this system.
The soft core-hard shell structure is the best, whereas the hard core-soft shell structure is the worst for enhancing the modulus in three-phase structures.
In this study, we developed a novel UV-curable polyurethane-urea elastomer containing disulfide, hydrogen, and metal coordination bonds. It can be rapidly UV-cured within 100 s, exhibiting ultrahigh resilience (99% recovery at 1000% strain) and excellent self-healing efficiency (93% at 80 °C), providing an effective strategy for high-performance flexible electronics.
Alexandra L. Nikolaeva, Alexander N. Bugrov, Veronika O. Vinogradova, Ivan V. Abalov, Elena N. Popova, Elena M. Ivan’kova, Vladimir E. Yudin, Victor M. Nazarychev
Mechanical mixing and in situ polycondensation were compared to incorporate Fe2O3 and Al2O3 nanocrystalline fillers into polyimide (PI) matrices. The role of flexibility of the PI matrix was also considered. This work highlights the correlation between the synthesis routes and PI composite properties, which is crucial for developing advanced materials with optimal thermal and mechanical properties.
A strategy combining self-crosslinking and ionic crosslinking is used to fabricate waterborne polyurethane with a microphase separated structure. This strategy dramatically enhances the mechanical strength and water resistance. Waterborne polyurethane can serve as a recoverable solvent-free adhesive. Moreover, this film exhibits high antibacterial efficiency and satisfactory cytocompatibility for biomedical applications.
A multifunctional hydrogel via room-temperature TA-Fe3+ self-initiation and LiTFSI incorporation exhibited high stretchability, high conductivity, antibacterial properties, and other properties for triboelectric nanogenerators and self-powered sensors.
The low-temperature toughness of polypropylene (PP) composites is improved by a dual-dispersed phase structure, achieved through the interfacial tension-induced refinement of isoprene rubber (IR) phase with high-density polyethylene (HDPE)@ ethylene-propylene rubber (EPR) core-shell particles.
The regions of existence of a homogeneous solution of the epoxy oligomer/tetraethoxysilane/polysulfone (EO/TEOS/PSF) ternary system were determined. The obtained data provide a basis for controlling the phase behavior of multicomponent systems based on epoxy oligomers.
A high-stretch, adhesive and self-healing conductive hydrogel was constructed via guanine-cytosine (G-C) hydrogen bonds and ionic liquid functionalized carbon nanotubes (CNTs) for wearable motion sensing.
This study has achieved atomic-level simulation of the NIPS process and provides theoretical guidance for optimizing the manufacturing process parameters of polymer microporous membranes.