<正>Two polyurethanes of different molecular weights were prepared by the copolymerization of phenyl diisocyanate and diisopropyl tartrate. The polyurethanes having terminal isocyanate groups were reacted with 3-aminopropyl silica gel to afford two chiral stationary phases. The Mn of the two polyurethanes were 4057 g/mol and 6442 g/mol. The polyurethanes and the corresponding chiral stationary phases were characterized by FT-IR, 1H NMR and elemental analysis. The loading capacities of the polyurethanes on silica gel were 0.68 mmol units/g and 0.61 mmol units/g, respectively. The separation performance and the influence of additives, triethylamine and trichloroacetic acid, on the separation of chiral compounds were investigated by HPLC. The chiral stationary phase prepared from polyurethane with Mn of 4057 g/mol demonstrated better enantioseparation capability than that with Mn of 6442 g/mol. Additionally, it was found that the addition of triethylamine and trichloroacetic acid in the mobile phases significantly improved the enantioseparation for these two chiral stationary phases.

<正>The synthesis and characterization of coil-rod-coil triblock oligomers, poly（ethylene oxide）-b-p-hexaphenyl-b-poly（ethylene oxide）, are described. The number of repeating ethylene oxide units in each flexible block are 3 （EO3-PHP-EO3）, 8 （EO8-PHP-EO8）, 13 （EO13-PHP-EO13）, and 17 （EO17-PHP-EO17）, respectively. The structures of these oligomers are confirmed by 1H-NMR,13C-NMR, EA, and MALDI-TOF mass spectrometry. The introduction of soluble poly（ethylene oxide） coils to the rigid p-hexaphenyl segment significantly improves the solubility of the oligomers, so they can form smooth thin films by spin-coating from their solutions. The oligomers are quite thermally stable and have 1% weight loss temperatures at above 340℃under nitrogen. They can emit strong blue light in both solution and film state, and have fluorescence quantum yields of about 40% in chloroform. They are expected to have potential applications in optoelectronic devices.

<正>Evolution and fractal character of the phase morphology of high impact polystyrene/poly（cis-butadiene） rubber （HIPS/PcBR） blends during melting and mixing were investigated using scanning electron microscopy （SEM）. The characteristic length L was defined as the size of particles of the dispersed phase in blends. Different fractal dimensions, Df and Dm, were introduced to study the distribution width of phase dimensions in the dimensionless region and the uniformity of the spatial distribution of particles, respectively. The results showed that the average characteristic length Lm and Df increase as the volume fraction of the dispersed phase increases, when the volume fraction of the dispersed phase is lower than 50%. In other words, the size of particles increases and their distribution in the dimensionless region becomes more uniform. Meanwhile, the uniformity of the spatial distribution becomes more perfect as the volume fraction increases. At a certain composition, Lm decreases in the initial stage of the mixing and levels off in the late stage. In the initial stage, Df becomes large rapidly with the process of blending, which means that the distribution of L in the dimensionless region becomes more uniform. Meanwhile, the spatial distribution tends to be ideal rapidly in the early stage and fluctuates in a definite range in the late stage of the mixing.

<正>The kinetic model for diffusion-controlled intermolecular reaction of homogenous polymer under steady shear was theoretically studied. The classic formalism and the concept of conformation ellipsoids were integrated to get a new equation, which directly correlates the rate constant with shear rate. It was found that the rate constant is not monotonic with shear rate. The scale of rate constant is N-1.5 （N is the length of chains）, which is in consistent with de Gennes’s result.

<正>Depolymerization of poly（ethylene terephthalate） （PET） was performed in the tubular bomb microreactor which contained the solution of PET in methanol and dibutyltin oxide at the temperature ranging from 433 K to 473 K, the reaction time from 5 to 45 min and the catalyst-to-PET ratio of 0.3%-2% by weight. The optimal condition for PET depolymerization catalyzed by dibutyltin oxide is the temperature of 443-453 K, the reaction time of 20-25 min and 0.8% by weight of catalyst. By using differential methods, the activation energy for the depolymerization process was found to be 154.05 kJ/mol in the temperature range from 433-463 K.

<正>The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions: molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.

<正>The mechanism of phase inversion emulsification process （PIE） was studied for waterborne dispersion of highly viscous epoxy resin using non-ionic polymeric surfactants. Drop deformation and breakup, Theological properties, conductivity, and particle size measurements reveal the micro-structural transition amid emulsification. It is revealed that strong flow causes water drop to burst with the formation of droplets and huge interface. Phase inversion corresponds to an abrupt rheological transition from a type of viscous melt with weak elasticity to a highly elastic type of aqueous gel. This implies that the phase inversion equivalent to a curvature inversion. Based on this, a geometric model is postulated to correlate process variables to the particle size. The coverage and conformation of the surfactant plays key role for the particle size of the final emulsion. The interactions of thermodynamic and hydrodynamic effects are also discussed. It is concluded that the thermodynamics control the PIE while the hydrodynamics drives the creation of interface and involves every step of PIE.