Fabrication of Mechanically Robust Self-lubricating Polyphenylene Sulfide Composites for High PV (Pressure × Velocity) Applications

Ji-Xiang Li; Mei Liang; Xiao-Wen Zhao; Sheng-Tai Zhou; Hua-Wei Zou

doi:10.1007/s10118-025-3486-4

Your Location：

Home >

Browse articles >

Fabrication of Mechanically Robust Self-lubricating Polyphenylene Sulfide Composites for High PV (Pressure × Velocity) Applications

RESEARCH ARTICLE | Updated：2026-01-13

- Fabrication of Mechanically Robust Self-lubricating Polyphenylene Sulfide Composites for High PV (Pressure × Velocity) Applications
- Fabrication of Mechanically Robust Self-lubricating Polyphenylene Sulfide Composites for High PV (Pressure × Velocity) Applications
- Chinese Journal of Polymer Science 2026年44卷第1期页码：140-153
- Affiliations：
  
  State Key Laboratory of Advanced Polymer Materials, Polymer Research Institute, Sichuan University, Chengdu 610065, China
- Author bio：
  
  qduzst@163.com (S.T.Z.)
  hwzou@163.com (H.W.Z.)
- Funds：
  
  This work was financially supported by the National Natural Science Foundation of China (No. 52103040), China Postdoctoral Science Foundation (No. 2020M673217) and the Fundamental Research Funds for the Central Universities (No. 2023SCU12022). We thank Hui Wang (Analytical & Testing Center of Sichuan University) for SEM observations.;Electronic supplementary information (ESI) is available free of charge in the online version of this article at http://doi.org/10.1007/s10118-025-3486-4.
- DOI：10.1007/s10118-025-3486-4
  中图分类号：
- 收稿：2025-08-28，
  
  录用：2025-10-20，
  
  网络首发：2026-01-04，
  
  纸质出版：2026-01-15
- Accepted：
Scan QR Code
Li, J. X.; Liang, M.; Zhao, X. W.; Zhou, S. T.; Zou, H. W. Fabrication of mechanically robust self-lubricating polyphenylene sulfide composites for high PV (pressure × velocity) applications. Chinese J. Polym. Sci. 2026, 44, 140–153

Ji-Xiang Li, Mei Liang, Xiao-Wen Zhao, et al. Fabrication of Mechanically Robust Self-lubricating Polyphenylene Sulfide Composites for High PV (Pressure × Velocity) Applications[J]. Chinese Journal of Polymer Science, 2026, 44(1): 140-153.
Li, J. X.; Liang, M.; Zhao, X. W.; Zhou, S. T.; Zou, H. W. Fabrication of mechanically robust self-lubricating polyphenylene sulfide composites for high PV (pressure × velocity) applications. Chinese J. Polym. Sci. 2026, 44, 140–153 DOI： 10.1007/s10118-025-3486-4.

Ji-Xiang Li, Mei Liang, Xiao-Wen Zhao, et al. Fabrication of Mechanically Robust Self-lubricating Polyphenylene Sulfide Composites for High PV (Pressure × Velocity) Applications[J]. Chinese Journal of Polymer Science, 2026, 44(1): 140-153. DOI： 10.1007/s10118-025-3486-4.

摘要

Multi-scale carbon fibers (CFs) can give full play to their respective advantages under certain ratios

thus achieving a significant improvement in the comprehensive performance of polyphenylene sulfide/irradiationtreated polytetrafluoroethylene (PPS/i-PTFE). Tribological tests at high PV (pressure × velocity) verified the viability of the composite in a demanding service environment.

Abstract

To address the poor mechanical performance and improve the tribological properties of self-lubricating polyphenylene sulfide/irradiation treated polytetrafluoroethylene (PPS/i-PTFE) blends

different aspect ratio carbon fibers (

i.e

PSCF: 50

SCF: about 429) were introduced as reinforcement fillers. The results showed that the hybriding of PSCF and SCF at certain mass ratios exhibited simultaneous enhancement of mechanical and tribological performance for PPS/i-PTFE blend through the construction of synergistic lubrication and mechanical interlocking network. Specifically

the flexural strength and modulus of PPS/i-PTFE were increased by 125.6% and 389.3%

the friction coefficient and specific wear rate were decreased by 13.9% and 95%

respectively. It was worth noting that PPS composites possessed excellent integrated performance which were able to withstand sliding action under high PV (≥10 MPa·m/s) conditions

as assessed by a customized pin-on-disc tester. This work demonstrated that the formation of intact lu

bricating film combined with the enhanced thermal and mechanical properties were favorable for improving the tribological properties of PPS-based composites

which makes them suitable for advanced engineering applications.

关键词

Keywords

references

Xiao, X.; Yin, Y.; Bao, J.; Lu, L.; Feng, X. Review on the friction and wear of brake materials. Adv. Mech. Eng. 2016 , 8 , 1−10..

Du, F.; Li, D.; Sa, X.; Li, C.; Yu, Y.; Li, C. Overview of friction and wear performance of sliding bearings. Coatings 2022 , 12 , 1303..

Luo, J.; Liu, M.; Ma, L. Origin of friction and the new frictionless technology-superlubricity: advancements and future outlook. Nano. Energy 2021 , 86 , 106092..

Elzayady, N.; Elsoeudy, R. Microstructure and wear mechanisms investigation on the brake pad. J. Mater. Res. Technol. 2021 , 11 , 2314−2335..

Findik, F. Latest progress on tribological properties of industrial materials. Mater. Design. 2014 , 57 , 218−244..

Hsissou, R.; Seghiri, R.; Benzekri, Z.; Hilali, M.; Rafik, M.; Elharfi, A. Polymer composite materials: a comprehensive review. Compos. Struct. 2021 , 262 , 113640..

Zirak, N.; Shirinbayan, M.; Deligant, M.; Tcharkhtchi, A. Toward polymeric and polymer composites impeller fabri cation. Polymers 2022 , 14 , 97..

Kurdi, A.; Chang, L. Recent advances in high performance polymers-tribological aspects. Lubricants 2019 , 7 , 2..

Stoeffler, K.; Andjelic, S.; Legros, N.; Roberge, J.; Schougaard, S.B. Polyphenylene sulfide (PPS) composites reinforced with recycled carbon fiber. Compos. Sci. Technol. 2013 , 84 , 65−71..

Zhou, S.; Zhang, Q.; Wu, C.; Huang, J. Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide 6/polyphenylene sulfide composites. Mater. Design 2013 , 44 , 493−499..

Zhao, Q.; Bahadur, S. A study of the modification of the friction and wear behavior of polyphenylene sulfide by particulate Ag 2 S and PbTe fillers. Wear. 1998 , 217 , 62−72..

Schwartz, C.J.; Bahadur, S. The role of filler deformability, filler-polymer bonding, and counterface material on the tribological behavior of polyphenylene sulfide (PPS). Wear 2001 , 251 , 1532−1540..

Yu, L.; Bahadur, S. An investigation of the transfer film characteristics and the tribological behaviors of polyphenylene sulfide composites in sliding against tool steel. Wear 1998 , 214 , 245−251..

Kim, S.S.; Shin, M.W.; Jang, H. The wear mechanism of a polyphenylene sulfide (PPS) composite mixed with ethylene butyl acrylate (EBA). Tribol. Lett. 2012 , 47 , 165−173..

Li, J.; Li, J.; Xiang, J.; Gong, X.; Xie, P.; Chen, Y.; Liang, M.; Zou, H.; Zhou, S. Improving Tribological Performance of Poly (phenylene sulfide) by Incorporating PTFE Fillers: The Influence of Filler Type and Concentrations. Polymers 2025 , 17 , 1222..

Qiu, X.; Gu, A.; Tang, W.; Tang, S.; Yu, Z. Effect of perfluoropolymers on the anti-wear properties of carbon fiber/polyphenylene sulfide composites: a comparative study. ACS. Omega 2022 , 7 , 40316−40323..

[Golchin, A.; Friedrich, K.; Noll, A.; Prakash, B. Tribological behavior of carbon-filled PPS composites in water lubricated contacts. Wear . 2015 , 328-329 , 456-463..

Chen, G.; Mohanty, A.K.; Misra, M. Progress in research and applications of polyphenylene sulfide blends and composites with carbons. Compos. Part. B: Eng. 2021 , 209 , 108553..

Yu, L.; Yang, S.; Liu, W.; Xue, Q. An investigation of the friction and wear behaviors of polyphenylene sulfide filled with solid lubricants. Polym. Eng. Sci. 2000 , 40 , 1825−1832..

[Guo, L.; Zhu, H.; Sun, Y. Friction and wear studies on polyphenylene sulfide filled with a complex mixture. Appl. Mech. Mater . 2012 , 184-185 , 1400-1403..

Saad, N.; Ola, A. Enhancement of tribological and mechanical behavior of polyphenylene sulfide reinforced by titanium dioxide nanoparticles. Key. Eng. Mater. 2016 , 724 , 20−27..

Bahadur, S.; Sunkara, C. Effect of transfer film structure, composition and bonding on the tribological behavior of polyphenylene sulfide filled with nano particles of TiO 2 , ZnO, CuO and SiC. Wear. 2005 , 258 , 1411−1421..

Shi, Y.; Bai, Y.; Lei ,Y.; Zhang, H.; Zhou, S.; Zou, H. Simultaneously enhanced heat dissipation and tribological properties of polyphenylene sulfide-based composites via constructing segregated network structure. J. Mater. Sci. Technol. 2022 , 99 , 239−250..

Lu, C.; Yuan, Q.; Simons, R.; Hyra, P.; Shen, J.; Bateman, S. Influence of SiC and VGCF nano-fillers on crystallization behaviour of PPS composites. J. Nanosci. Nanotechnol. 2016 , 16 , 8366−8373..

Manjunath, A.; Manjushree, H.; Nagaraja, K.C.; Pranesh, K.G. Role of E-glass fiber on mechanical, thermal and electrical properties of polyphenylene sulfide (PPS) composites. Mater. Today. Proceed. 2022 , 62 , 5439−5443..

Yu, L.G.; Yang, S.R. Investigation of the transfer film characteristics and tribochemical changes of Kevlar fiber reinforced polyphenylene sulfide composites in sliding against a tool steel counterface. Thin Solid Films 2002 , 413 , 98−103..

Basavaraj, E.; Ramaraj, B.; Siddaramaiah. Investigations on the influence of polytetrafluoroethylene powder as a filler on physico-mechanical and wear characteristics of nylon 66/graphite composites. High Perform. Polym. 2012 , 24 , 616−624..

Li J. The impact and tribological properties of PTFE composites filled with PA6. J. Thermoplast. Compos. 2009 , 23 , 807−816..

Friedrich, K.; Zhang, Z.; Schlarb, A.K. Effects of various fillers on the sliding wear of polymer composites. Compos. Sci. Technol. 2005 , 65 , 2329−2343..

Li, J.; Mei, J.; Peng, X.; Zou, H.; Zhou, S. Improving the tribological performance of polyphenylene sulfide by incorporating irradiation treated polytetrafluoroethylene powders. J. Appl. Polym. Sci. 2023 , 140 , e53998..

Zhang, H.; Wu, Y.; Liang, M.; Wu, H.; Zou, H.; Chen, Y. Comparative study on the mechanical, tribological, and thermal properties of POM composites filled with different PTFE. J. Thermoplast. Compos. 2020 , 35 , 1319−1341..

Chen, Z.; Liu, X.; Li, T.; Lü, R. Mechanical and tribological properties of PA66/PPS blend. II. F illed with PTFE. J. Appl. Polym. Sci. 2006 , 101 , 969−977..

Saravanan, D.; Sollapur, S.B.; Anjappa, S.B.; Malla, C.; Prasad, M.; Vignesh, S. Tribological properties of filler and green filler reinforced polymer composites. Mater. Today Proceed. 2022 , 50 , 2065−2072..

Chen, Y.; Zhang, J.; Wang, L.; Tian, Q.; Wu, J.; Li, P. Tribological behavior of carbon-fiber-reinforced polymer with highly oriented graphite nanoplatelets. Tribol. Int. 2023 , 186 , 108577..

[Kunishima, T.; Nagai, Y.; Kurokawa, T.; Bouvard, G.; Abry, J.C.; Fridrici, V. Tribological behavior of glass fiber reinforced-PA66 in contact with carbon steel under high contact pressure, sliding and grease lubricated conditions. Wear 2020 , 456-457 , 203383..

Omrani, E.; Menezes, P.L.; Rohatgi, P.K. State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Eng. Sci. Technol. 2016 , 19 , 717−736..

Kumar, S.; Singh, K.K. Tribological characteristics of glass/carbon fibre-reinforced thermosetting polymer composites: a critical review. J. Braz. Soc. Mech. Sci. 2022 , 44 , 496..

Luo, W.; Liu, Q.; Li, Y.; Zhou, S.; Zou, H.; Liang, M. Enhanced mechanical and tribological properties in polyphenylene sulfide/polytetrafluoroethylene composites reinforced by short carbon fiber. Compos. Part. B: Eng. 2016 , 91 , 579−588..

Cho, M.H.; Bahadur, S. Study of the tribological synergistic effects in nano CuO-filled and fiber-reinforced polyphenylene sulfide composites. Wear 2005 , 258 , 835−845..

Li, J.; Zhou, S.; Liang, M.; Zou, H. Fabrication of polyphenylene sulfide composites with integrated mechanical and tribological properties by synchronically adding irradiation-treated PTFE powders and short carbon fibers. Tribol. Int. 2023 , 186 , 108559..

Shojaei, A.; Gholamalipour, S. Effect of chemical treatment of Teflon powder on the properties of polyamide66/Teflon composites prepared by melt mixing. Macromol. Res. 2011 , 19 , 613−621..

Panin, S.V.; Le, M.H.; Kornienko, L.A.; Alexenko, V.O.; Ivanova, L.R.; Ovechkin, B.B. Mechanical and tribotechnical properties of polyphenylene sulfide composites reinforced with carbon fibers of various dimension. AIP. Confer. Proceed. 2018 , 2051 , 020231..

Suresha, B.; Chandramohan, G.; Samapthkumaran, P.; Seetharamu, S. Three-body abrasive wear behaviour of carbon and glass fiber reinforced epoxy composites. Mater. Sci. Eng: A. 2007 , 443 , 285−291..

Panin, S.V.; Kornienko, L.A.; Hiep, T.M.; Aleksenko, V.O.; Buslovich, D.G. The effect of physical-chemical nature of UHMWPE and PPS thermoplastic matrices on the formation of mechanical and tribological properties of their carbon fiber filled composites. Russ. Phys. J. 2020 , 63 , 554−562..

Panin, S.; Anh, N.; Kornienko, L.; Ivanova, L. Antifriction multi-component polyetheretherketon (PEEK) based composites. AIP. Confer. Proceed. 2019 , 2141 , 040005..

Mu, L.; Shi, Y.; Feng, X.; Zhu, J.; Lu, X. The effect of thermal conductivity and friction coefficient on the contact temperature of polyimide composites: Experimental and finite element simulation. Tribol. Int. 2012 , 53 , 45−52..

Váradi, K.; Néder, Z.; Friedrich, K.; Flöck, J. Numerical and finite element contact temperature analysis of real composite-steel surfaces in sliding contact. Tribol. Int. 1998 , 31 , 669−686..

Chen, J.; Zhu, J.; Li, Q.; Wu, H.; Guo, S.; Qiu, J. Constructing 3D interconnected CNTs network in PA6 composites with well-dispersed UHMWPE for excellent tribological and heat dissipation properties. Compos. Part. B: Eng. 2022 , 246 , 110252..

Shi, Y.; Liang, M.; Wu, H.; Chen, Y.; Zhou, S.; Zou, H. Hybridization of polytetrafluorethylene fibers and multiscale short carbon fibers to significantly improve the tribological performance of polyphenylene sulfide. Adv. Eng. Mater. 2021 , 23 , 2000787..

Liu, C.; Qiu, S.; Du, P.; Zhao, H.; Wang, L. An ionic liquid-graphene oxide hybrid nanomaterial: synthesis and anticorrosive applications. Nanoscale 2018 , 10 , 8115−8124..

Ayish, I.; Zihlif, A. Electrical properties of conductive network in carbon fibers/polymer composites. J. Reinf. Plast. Compos. 2010 , 29 , 3237−3243..

Zimmer, M.; Cheng, Q.; Li, S.; Brooks, J.; Liang, R.; Wang, B. Comparative characterization of multiscale carbon fiber composite with long and short MWCNTs at higher weight fractions. J. Nanomater. 2012 , 6 , 1687−4110..

Wang, Z. Y.; Liu, X. K. Polymer-to-monomers chemically recyclable poly(imide-imine) plastics with extreme-condition resistance and flame retardancy. Chinese J. Polym. Sci. 2024 , 42 , 1525−1535..

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Durable Anti-fogging and Abrasion-resistant Coatings Based on Polyoxometalates-Hydrophilic Resin Composites with Enhanced Cohesion and Adhesion

Tunable Circularly Polarized Luminescence of Helical Poly(phenylacetylene)s via Side-chain-to-Backbone Förster Resonance Energy Transfer

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Silk Sericin-inspired Poly-β-homoserine for Protein Protection

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber