Preparation of Polypropylene Nanofibers as a Function of the Thermal Exposure Time of the Polymer in a Melt Electrospinning/Melt Blown Hybrid System

Eunji Moon; Jihwan Lim; Minseo Kim; Han Seong Kim

doi:10.1007/s10118-025-3453-0

Your Location：

Home >

Browse articles >

Preparation of Polypropylene Nanofibers as a Function of the Thermal Exposure Time of the Polymer in a Melt Electrospinning/Melt Blown Hybrid System

RESEARCH ARTICLE | Updated：2025-12-03

- Preparation of Polypropylene Nanofibers as a Function of the Thermal Exposure Time of the Polymer in a Melt Electrospinning/Melt Blown Hybrid System
- Preparation of Polypropylene Nanofibers as a Function of the Thermal Exposure Time of the Polymer in a Melt Electrospinning/Melt Blown Hybrid System
- Chinese Journal of Polymer Science 2025年43卷第12期页码：2422-2431
- Affiliations：
  
  a.School of Chemical Engineering, Pusan National University, 2, Busandaehak-ro 63boen-gil, Geumjeong-gu, Busan 46241, Republic of Korea
  b.Institute of advanced organic materials, Pusan National University, 2, Busandaehak-ro 63boen-gil, Geumjeong-gu, Busan 46241, Republic of Korea
- Author bio：
  
  hanseongkim@pusan.ac.kr
- Funds：
  
  This work was financially supported by the Technology Innovation Program (or Industrial Strategic Technology Development Program) (No. 20017666) funded by the Ministry of Trade, Industry, and Energy (MOTIE, Korea).
- DOI：10.1007/s10118-025-3453-0
  中图分类号：
- 收稿：2025-06-30，
  
  修回：2025-08-09，
  
  录用：2025-09-11，
  
  网络首发：2025-11-19，
  
  纸质出版：2025-12-15
- Accepted：
Scan QR Code
Moon, E.; Lim, J.; Kim, M.; Kim, H. S. Preparation of polypropylene nanofibers as a function of the thermal exposure time of the polymer in a melt electrospinning/melt blown hybrid system. Chinese J. Polym. Sci. 2025, 43, 2422–2431

Eunji Moon, Jihwan Lim, Minseo Kim, et al. Preparation of Polypropylene Nanofibers as a Function of the Thermal Exposure Time of the Polymer in a Melt Electrospinning/Melt Blown Hybrid System[J]. Chinese Journal of Polymer Science, 2025, 43(12): 2422-2431.
Moon, E.; Lim, J.; Kim, M.; Kim, H. S. Preparation of polypropylene nanofibers as a function of the thermal exposure time of the polymer in a melt electrospinning/melt blown hybrid system. Chinese J. Polym. Sci. 2025, 43, 2422–2431 DOI： 10.1007/s10118-025-3453-0.

Eunji Moon, Jihwan Lim, Minseo Kim, et al. Preparation of Polypropylene Nanofibers as a Function of the Thermal Exposure Time of the Polymer in a Melt Electrospinning/Melt Blown Hybrid System[J]. Chinese Journal of Polymer Science, 2025, 43(12): 2422-2431. DOI： 10.1007/s10118-025-3453-0.

摘要

A melt electrospinning/melt-blown hybrid with a 0.3-mm nozzle and auxiliary hot air continuously produces solvent-free polypropylene fibers (~0.86 μm) for battery separators. Hot-air temperature chiefly controls fineness and stability. Higher nozzle temperature reduces viscosity and raises throughput but thins little. Scalable and sustainable

the process promises next-generation Li-ion separator applications.

Abstract

This study reports the fabrication of polypropylene (PP)-based microfiber webs (<1 µm) using a hybrid melt electrospinning/blown process with the aim of establishing a scalable and solvent-free platform for advanced lithium-ion battery separators. The primary objective was to address the inherent limitations of conventional melt electrospinning particularly the difficulty of achieving fiber thinning due to the high viscosity of polymer melts by incorporating auxiliary hot air flow and reducing the nozzle diameter from 1.0 mm to 0.3 mm. This modified configuration enables enhanced jet elongation and fiber diameter control under processing conditions relevant to industrial applications. The effects of nozzle temperature

hot air temperature

and applied voltage on fiber formation and jet behavior were systematically examined using high-speed charge-coupled device (CCD) imaging techniques. The results demonstrated that increasing both the hot air temperature and applied voltage significantly improved fiber thinning and uniformity

yielding an average fiber diameter of approximately 0.86 µm without evidence of thermal degradation. In contrast

elevated nozzle temperatures

while enhancing melt flowability

resulted in increased discharge rates and hindered fiber refinement when applied alone. These findings identify hot-air temperature as the most robust and controllable parameter for producing submicron fibers while maintaining the polymer integrity. Although the present study primarily focuses on morphological optimization and jet dynamics

future research will investigate the functional performance of fabricated microfiber webs as battery separators. Overall

the proposed hybrid process offers a technically feasible and environmentally sustainable route for the continuous production of fine PP-based fibers tailored for high-performance energy-storage applications.

关键词

Keywords

references

Tarascon, J. M.; Armand, M. Issues and challenges facing rechargeable lithium batteries. Nature 2001 , 414 , 359−367..

Zhang, S. S. A review on the separators of liquid electrolyte Li-ion batteries. J. Power Sources 2007 , 164 , 351−364..

[He, J.; Li, X. Recent materials development for Li-ion and Li-S battery separators. J. Energy Storage 2025, 112 ,115541..

Wu, X. W.; Karuppiah, C.; Wu, Y. S.; Zhang, B. R.; Hsu, L. F.; Shih, J. Y.; James Li, Y. J.; Hung, T. F.; Kannan Ramaraj, S.; Jose, R.; Yang, C. C. Unveiling high-power and high-safety lithium-ion battery separator based on interlayer of ZIF-67/cellulose nanofiber with electrospun poly(vinyl alcohol)/melamine nonwoven membranes. J. Colloid Interface Sci. 2024 , 658 , 699−713..

Kong, L.; Wang, Y.; Yu, H.; Liu, B.; Qi, S.; Wu, D.; Zhong, W. H.; Tian, G.; Wang, J. In situ armoring: a robust, high-wettability, and fire-resistant hybrid separator for advanced and safe batteries. ACS Appl. Mater. 2019 , 11 , 2978−2988..

Arora, P.; Zhang, Z. Battery separators. Chem. Rev. 2004 , 104 , 4419−4462..

[Wang, E.; Chiu, C. H.; Chou, P. H. Safety assessment of polyolefin and nonwoven separators used in lithium-ion batteries. J. Power Sources 2020, 461 ..

Wang, H.; Zhang, Y.; Gao, H.; Jin, X.; Xie, X. Composite melt-blown nonwoven fabrics with large pore size as Li-ion battery separator. Int. J. Hydrogen Energy 2016 , 41 , 324−330..

Sun, H.; Liu, Z.; Sang, X.; Li, R.; Li, P.; Hu, X. Mechanically robust and safe separators based on inorganic nanofibers for lithium-ion batteries. ACS Appl. Energy Mater. 2024 , 7 , 5537−5547..

[Liang, X.; Zhou, Y.; Liu, D.; Wang, H.; Sun, J.; Cai, X. Optimization polypropylene separator by ultrathin Ti 0.6 Fe 0.4 O 2 nanosheet coating for Li-metal battery. J. Power Sources 2025, 640 , 236765..

Fen g, X.; Wang, H.; Yan, L.; He, C.; Chen, Y.; Xue, S.; Liu, Q. Composite separator based on a polyimide nanofiber membrane for advanced lithium-ion batteries. ACS Appl. Polym. Mater. 2024 , 6 , 11028−11038..

Huang, X. Separator technologies for lithium-ion batteries. J. Solid State Electrochem. 2010 , 15 , 649−662..

Patel, A.; Wilcox, K.; Li, Z.; George, I.; Juneja, R.; Lollar, C.; Lazar, S.; Grunlan, J.; Tenhaeff, W. E.; Lutkenhaus, J. L. High modulus, thermally stable, and self-extinguishing aramid nanofiber separators. ACS Appl. Mater. Interfaces 2020 , 12 , 25756−25766..

[Li, Y.; Li, Q.; Tan, Z. A review of electrospun nanofiber-based separators for rechargeable lithium-ion batteries. J. Power Sources 2019, 443 , 227262..

Jung, J. W.; Lee, C. L.; Yu,S.; Kim, I. D. Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review. J. Mater. Chem. A 2016 , 4 , 703−750..

Zhang, X.; Ji, L.; Toprakci, O.; Li ang, Y.; Alcoutlabi, M. Electrospun nanofiber-based anodes, cathodes, and separators for advanced lithium-ion batteries. Polym. Rev. 2011 , 51 , 239−264..

Wang, Z.; Pan, R.; Ruan, C.; Edstrom, K.; Stromme, M.; Nyholm, L. Redox-active separators for lithium-ion batteries. Adv. Sci. 2018 , 5 , 1700663..

Liu, Q.; Zhu, J.; Zhang, L.; Qiu, Y. Recent advances in energy materials by electrospinning. Renew. Sustainable Energy Rev. 2018 , 81 , 1825−1858..

Guo, Y.; Wu, M.; Ye, X.; Wei, S.; Huang, L.; Guo, H. High-efficiency and low-resistance melt-blown/electrospun PLA composites for air filtration. Polymers 2025 , 17 , 424..

Zhmayev, E.; Cho, D.; Joo, Y. L. Nanofibers from gas-assisted polymer melt electrospinning. Polymer 2010 , 51 , 4140−4144..

[Ye, H.; Chen, J.; Ge, J.; Huang, Y.; Ye, J.; Qu, X.; Meerasahib Mohamedazeem, M.; Wang, C.; Hu, P.; Liu, Y. Simulation and experimental investigation of electret polypropylene fiber preparation via centrifugal melt electrospinning for enhanced air filtration. Sep. Purif. Technol . 2025, 357 , 130113..

Brown, T. D.; Dalton, P. D.; Hutmacher, D. W. Melt electrospinning today: an opportune time for an emerging polymer process. Prog. Polym. Sci. 2016 , 56 , 116−166..

[Ibrahim, Y. S.; Hussein, E. A.; Zagho, M. M.; Abdo, G. G.; Elzatahry, A. A. Melt electrospinning designs for nanofiber fabrication for different applications. Int. J. Mol. Sci . 2019, 20 , 2455..

[Li, X.; Zhang, S.; Li, J.; Hu, X.; Zhang, J.; Wei, Q.; Zhang, C.; Zhang, D.; Liu, Y. Bio-degradable fibrous membranes for oil/water separation by melt electrospinning. J. Appl. Polym. Sci . 2024, 141 , e56018..

Zhang, L. H.; Duan, X. P.; Yan, X.; Yu, M.; Ning, X.; Zhao, Y.; Long, Y. Z. Recent advances in melt electrospinning. RSC Adv. 2016 , 6 , 53400−53414..

Grosshaus, C.; Bakirci, E.; Berthel, M.; Hrynevich, A.; Kade, J. C.; Hochleitner, G.; Groll, J.; Dalton, P. D. Melt electrospinning of nanofibers from medical-grade poly( ε -caprolactone) with a modified nozzle. Small 2020 , 16 , e2003471..

Lim, J.; Choi, S.; Kim, H. S. Behavior of melt electrospinning/blowing for polypropylene fiber fabrication. Polym. Int. 2022 , 72 , 120−125..

Lim, J.; Choi, S.; Kim, H. S. Hybrid processing of melt electrospinning/blowing for polypropylene/polyethylene glycol fiber fabrication with various diameter distribution. J. Text. Inst. 2024 , 116 , 349−356..

Moon, E.; Lim, J.; Kim, M.; Kim, H. S. Study on the spinning behavior and nanoweb fabrication of polypropylene (PP) nanofibers under different hot air and voltage conditions in a melt electrospinning/melt-blown hybrid system. Polym. Eng. Sci. 2025 , 65 , 4622−4630.

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Synergistic Toughening of Polypropylene Alloys Using Core-Shell High-density Polyethylene/Ethylene-Propylene Rubber and Isoprene Rubber Composite Rubber Particles

Development of Organic-Inorganic High Thermal Performance Composites Reinforced with Nanofibers for 3D Printing

Dynamic Ionic Crosslinking Polypropylene-based Elastomers with Excellent Mechanical Properties and Antibacterial Performance

Silk Sericin-inspired Poly-β-homoserine for Protein Protection

Molecularly Engineered Polyimide Films with Switchable Cavitation for Bidirectional Passive Thermal Regulation