State Key Laboratory of Polymer Physics and Chemistry & Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
tliao@ciac.ac.cn
收稿:2024-11-01,
修回:2024-12-19,
录用:2024-12-19,
网络首发:2025-02-21,
纸质出版:2025-04-01
Scan QR Code
Liao, T.; Jiang, Z. Y.; Men, Y. F. Strain-induced stereocomplex formation from the initially amorphous poly(L-lactic acid)/poly(D-lactic acid) samples. Chinese J. Polym. Sci. 2025, 43, 655–665
Tao Liao, Zhi-yong Jiang, Yong-feng Men. Strain-induced Stereocomplex Formation from the Initially Amorphous Poly(L-lactic acid)/Poly(D-lactic acid) Samples[J]. Chinese Journal of Polymer Science, 2025, 43(4): 655-665.
Liao, T.; Jiang, Z. Y.; Men, Y. F. Strain-induced stereocomplex formation from the initially amorphous poly(L-lactic acid)/poly(D-lactic acid) samples. Chinese J. Polym. Sci. 2025, 43, 655–665 DOI: 10.1007/s10118-025-3298-6.
Tao Liao, Zhi-yong Jiang, Yong-feng Men. Strain-induced Stereocomplex Formation from the Initially Amorphous Poly(L-lactic acid)/Poly(D-lactic acid) Samples[J]. Chinese Journal of Polymer Science, 2025, 43(4): 655-665. DOI: 10.1007/s10118-025-3298-6.
Direct strain-induced SC was observed. For the samples molded at 50 and 80 oC
this behavior is attributed to the considerable SC nuclei
which are assumed to act as physical cross-links to initiate strain-induced crystallization. At 120 oC
this phenomenon can be ascribed in part to the cold crystallization.
The strain-induced crystallization behaviors of ultrasonic micro-injection molded poly(L-lactic acid)/poly(D-lactic acid) (PLLA/PDLA) samples from an amorphous state were investigated by stress-strain relations and
in situ
wide angle X-ray diffraction (WAXD) measurements. The formation of direct strain-induced stereocomplex (SC) was evident. In samples molded at 50 and 80 °C
this phenomenon can be attributed to the acceleration of the ordered structures due to the existence of a large number of SC nuclei. The SC nuclei are assumed to serve as the transient physical cross-links to initiate the strain-induced crystallization. The onset of strain-induced crystallization is analogous to the heating induced structural reorganization. Consequently
the observed strain-induced SC process can be considered a pseudo process
which is actually thermally induced. Upon further stretching
the actual strain-induced crystallization occurs with the exclusive formation of the homocrystallite (HC)
while the preceding formed SC crystals undergo slight fragmentation during subsequent tensile deformation. At 120 °C
due to the reduced number of SC nuclei within the sample
the occurrence of cold crystallization during stretching plays a more significant role than SC nuclei with respect to the strain
-induced SC process
as demonstrated by
in situ
WAXD measurements upon annealing in both the static and stretched states.
Huneau, B. Strain-induced crystallization of natural rubber: a review of X-ray diffraction investigations. Rubber Chem. Technol. 2011 , 84 , 425−452..
Avila-Orta, C. A.; Burger, C.; Somani, R.; Yang, L.; Marom, G.; Medellin-Rodriguez, F. J.; Hsiao, B. S. Shear-induced crystallization of isotactic polypropylene within the oriented scaffold of noncrystalline ultrahigh molecular weight polyethylene. Polymer 2005 , 46 , 8859−8871..
Kumaraswamy, G.;Kornfield, J. A.; Yeh, F. J.; Hsiao, B. S. Shear-enhanced crystallization in isotactic polypropylene. 3. Evidence for a kinetic pathway to nucleation. Macromolecules 2002 , 35 , 1762−1769..
Hiss, R.; Hobeika, S.; Lynn, C .; Strobl, G. Network stretching, slip processes, and fragmentation of crystallites during uniaxial drawing of polyethylene and related copolymers. A comparative study. Macromolecules 1999 , 32 , 4390−4403..
Jiang, Z. Y.; Tang, Y. J.; Men, Y. F.; Enderle, H. F.; Lilge, D.; Roth, S. V.;Gehrke, R.; Rieger, J. Structural evolution of tensile-deformed high-density polyethylene during annealing: scanning synchrotron small-angle X-ray scattering study. Macromolecules 2007 , 40 , 7263−7269..
Heeley, E. L.; Billimoria, K.; Parsons, N.; Figiel, L.; Keating, E. M.; Cafolla, C. T.; Crabb, E. M.; Hughes, D. J. In-situ uniaxial drawing of poly-L-lactic acid (PLLA): Following the crystalline morphology development using time-resolved SAXS/WAXS. Polymer 2020 , 193 , 122353..
Tábi, T.; Ageyeva, T.; Kovács, J. G. Improving the ductility and heat deflection temperature of injection molded poly(lactic acid) products: a comprehensive review. Polym. Test. 2021 , 101 , 107282..
Tan, B. H.; Muiruri, J. K.; Li, Z.; He, C. Recent progress in using stereocomplexation for enhancement of thermal and mechanical property of polylactide. ACS Sustain. Chem. Eng. 2016 , 4 , 5370−5391. .
Tsuji, H.; Ikada, Y. Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. Mechanical properties and morphology of solution-cast films. Polymer 1999 , 40 , 6699−6708..
Tutoni, G.; Becker, M. L. Underexplored stereocomplex polymeric scaffolds with improved thermal and mechanical properties. Macromolecules 2020 , 53 , 10303−10314..
Zheng, Y.; Xu, S.; Yu, C.; Pan, P. Stereocomplexed materials of chiral polymers tuned by crystallization: A case study on poly(lactic acid). Acc. Mater. Res. 2022 , 3 , 1309−1322..
Mahjoubi, H.; Zaïri, F.; Vozniak, I.; Tourki, Z.; Zaïri, F. Modeling strain-induced dual-phase transformation in semicrystalline polylactide. Mech. Time-Depend. Mater . 2022 , 27 , 989−1005..
Zin, M. R. M.; Mahendrasingam, A.; Konkel, C.; Narayanan, T. Effect of D-isomer content on strain-induced crystallization behaviour of poly(lactic acid) polymer under high speed uniaxial drawing. Polymer 2021 , 216 , 123422..
Billimoria, K.; Heeley, E. L.; Parsons, N.; Figiel, L. An investigation into the crystalline morphology transitions in poly-L-lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime. Eur. Polym. J. 2018 , 101 , 127−139..
Zhou, C. B.; Li, H. F.; Zhang, W. Y.; Li, J. Q.; Huang, S. Y.; Meng, Y. F.; Christiansen, J. D.; Yu, D. H.; Wu, Z. H.; Jiang, S. C. Thermal strain-induced cold crystallization of amorphous poly(lactic acid). Crystengcomm 2016 , 18 , 3237−3246..
Zhou, C. B.; Li, H. F.; Zhang, W. Y.; Li, J. Q.; Huang, S. Y.; Meng, Y. F.; Christiansen, J. D.; Yu, D. H.; Wu, Z. H.; Jiang, S. C. Direct investigations on strain-induced cold crystallization behavior and structure evolutions in amorphous poly(lactic acid) with SAXS and WAXS measurements. Polymer 2016 , 90 , 111−121..
Yin, Y. G.; Zhang, X. Q.; Song, Y.; de Vos, S.; Wang, R. Y.; Joziasse, C. A. P.; Liu, G. M.; Wang, D. J. Effect of nucleating agents on the strain-induced crystallization of poly(L-lactide). Polymer 2015 , 65 , 223−232..
Stoclet, G.; Lefebvre, J. M.; Séguéla, R.; Vanmansa rt, C. In-situ SAXS study of the plastic deformation behavior of polylactide upon cold-drawing. Polymer 2014 , 55 , 1817−1828..
Stoclet, G.; Seguela, R.; Lefebvre, J. M.; Elkoun, S.; Vanmansart, C. Strain-induced molecular ordering in polylactide upon uniaxial stretching. Macromolecules 2010 , 43 , 1488−1498..
Lv, R. H.; Na, B.; Tian, N. N.; Zou, S. F.; Li, Z. J.; Jiang, S. C. Mesophase formation and its thermal transition in the stretched glassy polylactide revealed by infrared spectroscopy. Polymer 2011 , 52 , 4979−4984..
Zhang, X. Q.; Schneider, K.; Liu, G. M.; Chen, J. H.; Brüning, K.; Wang, D. J.; Stamm, M. Structure variation of tensile-deformed amorphous poly(L-lactic acid): effects of deformation rate and strain. Polymer 2011 , 52 , 4141−4149..
Zhang, X. Q.; Schneider, K.; Liu, G. M.; Chen, J. H.; Brüning, K.; Wang, D. J.; Stamm, M. Deformation-mediated superstructures and cavitation of poly(L-lactide): in situ small-angle X-ray scattering study. Polymer 2012 , 53 , 648−656..
Wang, Y.; Zhang, H.; Li, M.; Cao, W.; Liu, C.; Shen, C. Orientation and structural development of semicrystalline poly(lactic acid) under uniaxial drawing assessed by infrared spectroscopy and X-ray diffraction. Polym. Test. 2015 , 41 , 163−171..
Renouf-Glauser, A. C.; Rose, J.; Farrar, D. F.; Cameron, R. E. The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA. Biomaterials 2005 , 26 , 5771−5782..
Furuhashi, Y.; Kimura, Y.; Yoshie, N.; Yamane, H. Higher-order structures and mechanical properties of stereocomplex-type poly(lactic acid) melt spun fibers. Polymer 2006 , 47 , 5965−5972..
Stoclet, G. Strain-induced structural evolution of poly(L-lactide) and poly(D-lactide) blends. Polymer 2016 , 99 , 231−239..
Sun, C. X.; Xu, S. S.; Zhou, J.; Ni, L. L.; Xia, J. F.; Bao, Y. Z.; Shan, G. R.; Pan, P. J. Multiscale structural evolutions and deformation mechanisms of stereocomplexed and homocrystalline poly(lactic acid)s during stretching: correlating thermomechanical properties with polymorphic structures. Macromolecules 2023 , 56 , 5068−5079..
Liu, X.; Wang, S. T.; Huang, K.; Liu, H. M.; Zhang, X. Z.; Zou, L.; Shi, H. H.; Chang, B. B.; Liu, C. T. Competition effect of solid-state stretching induced orientation and phase separation on stereocomplex crystallization of PLLA/PDLA during annealing. Polymer 2023 , 269 , 125739..
Huang, W.; Shi, Y.; Wang, P.; Yang, Q.; du Sart, G. G.; Zhou, Y.; Joziasse, C. A. P.; Wang, R.; Chen, P. Facile and efficient formation of stereocomplex polylactide fibers drawn at low temperatures. Polymer 2022 , 246 , 124743..
Liao, T.; Jiang, Z.; Men, Y. Structural evolution of ultrasonic microinjection molded sterecomplexes of poly(lactide) during heating process. Polymer 2024 , 311 , 127551..
Zhao, X.; Liao, T.; Lu, Y.; Jiang, Z.; Men, Y. Formation and distribution of the mesophase in ultrasonic micro-injection-molded isotactic polypropylene. Macromolecules 2021 , 54 , 5167−5177..
Ding, Q.; Du, M.; Liao, T.; Men, Y.; Androsch, R. Polymorphic structure in ultrasonic microinjection-molded poly(butylene-2,6-naphthalate). Polymer 2022 , 257 , 125275..
Yamane, H.; Sasai, K. Effect of the addition of poly(D-lactic acid) on the thermal property of poly(L-lactic acid). Polymer 2003 , 44 , 2569−2575..
Wei, X. F.; Bao, R. Y.; Cao, Z. Q.; Zhang, L. Q.; Liu, Z. Y.; Yang, W.; Xie, B. H.; Yang, M. B. Greatly accelerated crystallization of poly(lactic acid): cooperative effect of stereocomplex crystallites and polyethylene glycol. Colloid. Polym. Sci. 2014 , 292 , 163−172..
Wei, X. F.; Bao, R. Y.; Cao, Z. Q.; Yang, W.; Xie, B. H.; Yang, M. B. Stereocomplexcrystallite network in asymmetric PLLA/PDLA blends: formation, structure, and confining effect on the crystallization rate of homocrystallites. Macromolecules 2014 , 47 , 1439−1448..
Hermans, P. H.; Platzeck, P. The deformation mechanism and the fine structure of hydrate cellulose. IX. The theoretical relation between swelling anisotropy and the characteristic double refraction of oriented filaments. Kolloid-Z. 1939 , 88 , 68−72..
Polanyi, M. The X-ray fiber diagram. Z. Fur. Phys. 1921 , 7 , 149−180..
Guo, M. W.; Wu, W. X.; Wu, W. J.; Wang, R. Z.; Huang, L. M.; Gao, Q. W. Recent advances in enhancing stereocomplexation between poly(lactide) enantiomeric chains. Phys. Chem. Chem. Phys. 2023 , 25 , 17737−17758..
Yang, C. F.; Huang, Y. F.; Ruan, J.; Su, A. C. Extensive development of precursory helical pairs prior to formation of stereocomplex crystals in racemic polylactide melt mixture. Macromolecules 2012 , 45 , 872−878..
Shang, Y. R. The melt memory effects in polymer crystallization. J. Polym. Sci. 2024 , 62 , 2340−2354..
Huang, Y. F.; Zhang, Z. C.; Li, Y.; Xu, J. Z.; Xu, L.; Yan, Z.; Zhong, G. J.; Li, Z. M. The role of melt memory and template effect in complete stereocomplex crystallization and phase morphology of polylactides. Cryst. Growth Des. 2018 , 18 , 1613−1621..
Li, W.; Wu, X. M.; Chen, X. Y.; Fan, Z. Y. The origin of memory effect in stereocomplex poly(lactic acid) crystallization from melt state. Eur. Polym. J. 2017 , 89 , 241 −248..
0
浏览量
263
Downloads
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802046900号