The Effect of <italic style="font-style: italic">In situ</italic> Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends

Wen-Kang Wei; Jing-Jing Zhao; Chen-Guang Liu; Dong Wang; Ai-Hua He

doi:10.1007/s10118-024-3240-3

Your Location：

Home >

Browse articles >

The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends

RESEARCH ARTICLE | Updated：2024-12-03

- The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends
- The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends
- 高分子科学（英文版） 2024年42卷第12期页码：2011-2020
- Affiliations：
  
  a.Shandong Provincial Key Laboratory of Olefin Catalysis and Polymerization, Key Laboratory of Rubber-Plastics (Ministry of Education), School of Polymer Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
  b.State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China
- Author bio：
  
  liuchenguang@qust.edu.cn (C.G.L.)
  dwang@mail.buct.edu.cn (D.W.)
  ahhe@qust.edu.cn, aihuahe@iccas.ac.cn (A.H.H.)
- Funds：
  
  This work was financially supported by the Major Scientific and Technological Innovation Project of Shandong Province (Nos. 2019JZZY010352 and 2021CXGC010901), Natural Science Foundation of Shandong Province (No. ZR2020ME079), and Taishan Scholar Program.;Electronic supplementary information (ESI) is available free of charge in the online version of this article at http://doi.org/10.1007/s10118-024-3240-3.
- DOI：10.1007/s10118-024-3240-3
  中图分类号：
- 收稿：2024-07-01，
  
  修回：2024-08-14，
  
  录用：2024-09-23，
  
  网络首发：2024-11-11，
  
  纸质出版：2024-12-01
- Accepted：
Scan QR Code
Wei, W. K.; Zhao, J. J.; Liu, C. G.; Wang, D.; He, A. H. The effect of in situ melt pre-shear induced oriented precursors on the crystallization of poly(1-butene)/polypropylene blends. Chinese J. Polym. Sci. 2024, 42, 2011–2020

Wen-Kang Wei, Jing-Jing Zhao, Chen-Guang Liu, et al. The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends[J]. Chinese Journal of Polymer Science, 2024, 42(12): 2011-2020. DOI: 10.1007/s10118-024-3240-3.
Wei, W. K.; Zhao, J. J.; Liu, C. G.; Wang, D.; He, A. H. The effect of in situ melt pre-shear induced oriented precursors on the crystallization of poly(1-butene)/polypropylene blends. Chinese J. Polym. Sci. 2024, 42, 2011–2020 DOI： 10.1007/s10118-024-3240-3.

Wen-Kang Wei, Jing-Jing Zhao, Chen-Guang Liu, et al. The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends[J]. Chinese Journal of Polymer Science, 2024, 42(12): 2011-2020. DOI: 10.1007/s10118-024-3240-3. DOI：

摘要

In situ

melt pre-shear induced oriented precursors of PP directly lead to the formation of different kind of or

iented crystal structure of PP

which has a significant effect on the subsequent crystallization (including crystallization behavior

crystal properties

crystal structure and morphology) of PB in PB/PP blends.

Abstract

Melt pre-shear induced crystallization of polymer blends holds great significance in industrial processing and product application. In this work

two typical PB/PP blends (50/50

90/10)

possessing commercial value and academic hotspot

were employed to investigate the effect of melt pre-shear on the crystallization of isotactic poly(1-butene) (PB) and polypropylene (PP) by applying shearing slightly above the melting temperature of PP with subsequent non-isothermal crystallization to simulate actual processing conditions. It was discovered that in PB/PP (90/10) blend

in situ

melt pre-shear generated oriented PP precursors induced the formation of PP-FIC (Flow-induced crystallization) which acted as row crystal nucleus significantly promoting PB crystallization into spherulite with higher melting temperatures (

)

crystallinity (

)

and thicker lamellar thickness (

). While in PB/PP (50/50) blend

the melt pre-shear generated PP-shish precursors induced the formation of PP shish-kebab that exerted a confining effect on the crystal growth of PB

resulting in truncated spherulite formation with higher

and thicker

but lower

. This research provides insight into the mechanism underlying oriented crystal structure formation

crystal properties

and phase morphology of PB/PP blends under melt pre-shear fields

which have significant theoretical and practical implications for their industrial processing and preparation of high-performance products.

关键词

Keywords

references

Luciani, L.; Seppälä, J.; Löfgren, B. Poly-1-butene: its preparation, properties and challenges. Prog. Polym. Sci. 1988 , 13 , 37−6 2..

Gedde, U. W.; Viebke, J.; Leijström H.; Ifwarson, M. Long-term properties of hot-water polyolefin pipes-a review. Polym. Eng. Sci. 1994 , 34 , 1773−1787..

Men, Y. F.; Rieger, J.; Homeyer, J. Synchrotron ultrasmall-angle X-ray scattering studies on tensile deformation of poly(1-butene). Macromolecules 2004 , 37 , 9481−9488..

De Rosa, C.; Ruiz de Ballesteros, O.; Auriemma, F.; Di Girolamo, R.; Scarica, C.; Giusto, G.; Esposito, S.; Guidotti, S.; Camurati, I. Polymorphic behavior and mechanical properties of isotactic 1-butene-ethylene copolymers from metallocene catalysts. Macromolecules 2014 , 47 , 4317−4329..

De Rosa, C.; Tarallo, O.; Auriemma, F.; Ruiz de Ballesteros, O.; Di Girolamo, R.; Malafronte, A. Crystallization behavior and mechanical properties of copolymers of isotactic poly(1-butene) with 1-octene from metallocene catalysts. Polymer 2015 , 73 , 156−169..

De Rosa, C.; Auriemma, F.; Ruiz de Ballesteros, O.; Esposito, F.; Laguzza, D.; Di Girolamo, R.; Resconi, L. Crystallization properties and polymorphic behavior of isotactic poly(1-butene) from metallocene catalysts: the crystallization of form I from the melt. Macromolecules 2009 , 42 , 8286−8297..

He, A. H.; Xu, C. S.; Shao, H. F.; Yao, W.; Huang, B. C. Effect of molecular weight on the polymorphic transformation of isotactic poly(1-butene). Polym. Degrad. Stab. 2010 , 95 , 1443−1448..

Liu, C.; Zhang, Z. J.; Huang S. Y.; Chen, Q. Form II to I transformation of polybutene-1 and copolymer of butene-1 and ethylene: a role of amorphous phase. Polymer 2018 , 149 , 146−153..

Qiao, Y. N.; Men, Y. F. Intercrystalline links determined kinetics of form II to I polymorphic transition in polybutene-1. Macromolecules 2017 , 50 , 5490−5497..

Ma, Y. P.; Zheng, W. P.; Liu, C. G.; Shao, H. F.; Nie, H. R.; He, A. H. Differential polymorphic transformation behavior of polybutene-1 with multiple isotactic sequences. Chinese. J. Polym. Sci. 2020 , 38 , 164−173..

Qiao, Y. N.; Wang, Q.; Men, Y. F. Kinetics of nucleation and growth of form II to I polymorphic transi tion in polybutene-1 as revealed by stepwise annealing. Macromolecules 2016 , 49 , 5126−5136..

Qiao, Y. N.; Wang, H.; Men, Y. F. Retardance of form II to form I transition in polybutene-1 at late stage: a proposal of a new mechanism. Macromolecules 2018 , 51 , 2232−2239..

Wang, B. H.; He, K. Z.; Lu, Y. G.; Zhou, Y. F.; Chen, J. L.; Shen, C. Y.; Chen, J. B.; Men, Y. F.; Zhang, B. Nucleation mechanism for form II to I polymorphic transformation in polybutene-1. Macromolecules 2020 , 53 , 6476−6485..

Shi, G. Y.; Wang, Z. F.; Wang, M.; Liu, G. M.; Cavallo, D.; Müller, A. J.; Wang, D. J. Crystallization, orientation, and solid-solid crystal transition of polybutene-1 confined within nanoporous alumina. Macromolecules 2020 , 53 , 6510−6518..

Ji, Y. X.; Su, F. M.; Cui, K. P.; Huang, N. D.; Qi, Z. M.; Li, L. B. Mixing assisted direct formation of isotactic poly(1-butene) form I′ Crystals from blend melt of isotactic poly(1-butene)/polypropylene. Macromolecules 2016 , 49 , 1761−1769..

Si egmann, A. Crystallization of crystalline/crystalline blends: polypropylene/polybutene-1. J. Appl. Polym. Sci. 1982 , 27 , 1053−1065..

Shieh, Y. T.; Lee, M. S.; Chen, S. A. Crystallization behavior, crystal transformation, and morphology of polypropylene/polybutene-1 blends. Polymer 2001 , 42 , 4439−4448..

Cham, P. M.; Lee, T. H.; Marand, H. On the state of miscibility of isotactic poly(propylene)/isotactic poly(1-butene) blends: competitive liquid-liquid demixing and crystallization processes. Macromolecules 1994 , 27 , 4263−4273..

Wang, Z. F.; Dong, X.; Liu, G. M.; Xing, Q.; Cavallo, D.; Jiang, Q. H.; Müller, A. J.; Wang, D. J. Interfacial nucleation in iPP/PB-1 blends promotes the formation of polybutene-1 trigonal crystals. Polymer 2018 , 138 , 396−406..

Wang, Z. F.; Jiang, Q. H.; Xing, Q.; Wang, D. J. The effect of lamellar thickness of iPP on the formation of trigonal modification of PB-1 under confinement environment. Acta Polymerica Sinica (in Chinese) 2022 , 53 , 514-521..

Xu, Y.; Liu, C. G.; Nie, H. R.; He, A. H. Fractionated and confined crystallization of polybutene-1 in immiscible polypropylene/polybutene-1 blends. Chinese. J. Polym. Sci. 2018 , 36 , 859−865..

Zhong, Z. X.; Ge, H.; Su, Z. H. Direct formation of form I’ crystals in polybutene-1/polypropylene blend enhanced by cold crystallization. Polymer 2018 , 156 , 30−38..

Zhong, Z. X.; Su, Z. H. Effects of molecular weight on polybutene-1 cold crystallization from polybutene-1/polypropylene blend. Polymer 2019 , 174 , 52−60..

Zhong, Z. X.; Su, Z. H. Mechanism of form I′ formation in polybutene-1/polypropylene blends. Polymer 2022 , 239 , 124469..

Hsiao, B. S.; Yang, L.; Somani, R. H.; Avila-Orta, C. A.; Zhu, L. Unexpected shish-kebab structure in a sheared polyethylene melt. Phys. Rev. Lett. 2005 , 94 , 117802..

Song, K.; Wu, L. F.; Liu, D.; Huang, L. Z.; Miao, X. R.; Wang, Z. Flow-induced shish nucleation in lightly crosslink ed polyethylene: connecting polymer properties and strain to the final shish-kebab structure. Macromolecules 2022 , 55 , 6866−6875..

Deng, B.; Chen, L.; Li, X. K.; Wang, Z. B. Influence of prereserved shish crystals on the structural evolution of ultrahigh-molecular weight polyethylene films during the hot stretching process. Macromolecules 2022 , 55, 4600−4613..

Zhang, J. Q.; Liu, C.; Zhao, X. T.; Zhang, Z. J.; Chen, Q. Formation of fibrillar crystals strongly accelerates the form II to I transformation of polybutene-1. Soft Matter 2020 , 16, 4955−4960..

Yin, J.; Deng, L. F.; Ma, G.Q.; Wu, F. Y.; Xu, J. Z.; Gao, X. Q.; Bian, F. G.; Lei, J.; Zhong, G. J.; Li, Z. M. High-throughput in situ characterization of polymer crystallization under an intense flow, high pressure, and cooling gradient during injection molding. Macromolecules 2023 , 56 , 4111−4122..

Zhao, X. T.; Liao, T.; Lu, Y.; Jiang, Z. Y.; Men, Y. F. Formation and distribution of the mesophase in ultrasonic micro-injection-molded isotactic polypropylene. Macromolecules 2021 , 54 , 5167−5177..

Zhao, X. T.; Liao, T.; Yang, X.; Coates, P.; Whiteside, B.; Barker, D.; Thompson, G.; Jiang, Z. Y.; Men, Y. F. Mold temperature- and molar mass-dependent structural formation in micro-injection molding of isotactic polypropylene. Polymer 2022 , 248 , 124797..

Zhong, G. J.; Yang, S. G.; Lei, J.; Li, Z. M. Flow-induced polymer crystallization under pressure and its engineering application in “structuring” polymer processing. Macromolecules 2024 , 57 , 789−809..

Jiang, Y. X.; Wu, J. J.; Leng, J.; Cardon, L.; Zhang, J. Reinforced and toughened PP/PS composites prepared by Fused Filament Fabrication (FFF) with in-situ microfibril and shish-kebab structure. Polymer 2020 , 186 , 121971..

Wang, Y.; Na, B.; Fu, Q.; Men, Y. F. Shear induced shish-kebab structure in PP and its blends with LLDPE. Polymer 2004 , 45 , 207−215..

Na, B.; Zhang, Q.; Wang, K.; Li, L. B.; Fu, Q. Origin of various lamellar orientations in high-density polyethylene/isotactic polypropylene blends achieved via dynamic packing injection molding: bulk crystallization vs. Epitaxy. Polymer 2005 , 46 , 819−825..

Li, Y. J.; Kaito, A. Crystallization and orientation behaviors of poly(vinylidene fluoride) in the oriented blend with nylon 11. Polymer 2003 , 44 , 8167−8176..

Na, B.; Zhang, Q.; Wang, Y.; Du, R. N.; Fu, Q. Three-dimensional phase morphologies in HDPE/EVA blends obtained via dynamic injection packing molding. Polymer 2003 , 44 , 5737−5747..

Xu, Y.; Ma, Y. P.; Liu, C. G.; Men, Y. F.; He, A. H. Crystallization of forms I′ and form II of polybutene-1 in stretched polypropylene/polybutene-1 blends. Polymer 2019 , 182 , 121817..

Guo, Z. X.; Xin, R.; Hu, J.; Li, Y. P.; Sun, X. L.; Yan, S. K. Direct high-temperature form I crystallization of isotactic poly(1-butene) assisted by oriented isotactic polypropylene. Macromolecules 2019 , 52 , 9657−9664..

Sato, S.; Maeda, T.; Yamaguchi, M. Control of chain orientation in blends of polypropylene and polybutene-1. Macromol. Mater. Eng. 2017 , 302 , 1600413..

Zhang, W. D.; Martins, J. A. Evaluation of the effect of melt memory on shear-induced crystallization of low-density polyethylene. Macromol. Rapid. Commun. 2006 , 27 , 1067−1072..

Wei, W. K.; Ma, Y. P.; Yan, X. J.; Liu, C. G.; He, A. H. Melt pre-shear induced orientation crystallization of PB and PB/HMwPB blend. Polymer 2022 , 257 , 125276..

Hamad, F. G.; Colby, R. H.; Milner, S. T. Lifetime of flow-induced precursors in isotactic polypropylene. Macromolecules 2015 , 48 , 7286−7299..

Liu, C.; Zhang, Z. J.; Chen, Q.; You, W.; Yu, W. Stability of flow-induced precursors in poly-1-butene and copolymer of 1-butene and ethylene. J. Rheol. 2018 , 62 , 725−737..

Hamad, F. G.; Colby, R. H.; Milner, S. T. Onset of flow-induced crystallization kinetics of highly isotactic polypropylene. Macromolecules 2015 , 48 , 3725−3738..

Zhang, J. Q.; Chen, Q. Shear-induced precursors of fibrillar crystals of poly(butene-1): a rheological study. Chinese. J. Polym. Sci. 2022 , 40 , 618−623..

Strobl, G. R.; Schneider, M. J.; Voigt-Martin, I. G. Model of partial crystallization and melting derived from small-angle X-ray scattering and electron microscopic studies on low-density polyethylene. J. Polym. Sci., Part B: Polym. Phys. 1980 , 18 , 1361−1381..

Hermans, J. J.; Hermans, P. H.; Vermaas, D.; Weidinger, A. Quantitative evaluation of orientation in cellulose fibres from the X-ray fibre diagram. Recl. Trav. Chim. Pays-Bas 1946 , 65 , 427−447..

Wunderlich, B. Equilibrium melting of flexible linear macromolecules. Polym. Eng. Sci. 1978 , 18 , 431−436..

McLeish, T. C. B. Tube theory of entangled polymer dynamics. Adv. Phys. 2002 , 51 , 1379−1452..

Liu, C.; Zhang, J. Q.; Zhang, Z. J.; Huang, S. Y.; Chen, Q.; Colby, R. H. Shear-induced oriented crystallization for isotactic poly(1-butene) and its copolymer with ethylene. Macromolecules 2020 , 53 , 3071−3081..

Fetters, L. J.; Lohse, D.; Graessley, W. W. Chain dimensions and entanglement spacings in dense macromolecular systems. J. Polym. Sci., Part B: Polym. Phys. 1999 , 37 , 1023−1033..

Boukany, P. E.; Wang, S. Q.; Wang, X. R. Step shear of entangled linear polymer melts: new experimental evidence for elastic yielding. Macromolecules 2009 , 42 , 6261−6269..

Nazari, B.; Tran, H.; Beauregard, B.; Flynn-Hepford, M.; Harrell, D.; Milner, S.T.; Colby, R. H. Two distinct morphologies for semicrystalline isotactic polypropylene crystallized after shear flow. Macromolecules 2018 , 51 , 4750−4761..

Meerveld, J. V.; Peters, G. M. W.; Hütter, M Towards a rheological classification of flow induced crystallization experiments of polymer melts. Rheol Acta 2004 , 44 , 119-134..

Mykhaylyk, O. O.; Chambon, P.; Impradice, C.; Fairclough, J. P. A.; Terrill, N. J.; Ryan, A. J. Control of structural morphology in shear-induced crystallization of polymers. Macromolecules 2010 , 43 , 2389−2405..

Mykhaylyk, O. O.; Chambon, P.; Graham, R. S.; Fairclough, J. P. A.; Olmsted, P. D.; Ryan, A. J. The specific work of flow as a criterion for orientation in polymer crystallization. Macromolecules 2008 , 41 , 1901−1904..

Hamad, F.G.; Colby, R. H.; Milner, S. T. Transition in crystal morphology for flow-induced crystallization of isotactic polypropylene. Macromolecules 2016 , 49 , 5561−5575..

Hu, J.; Tashiro, K. Relation between higher-order structure and crystalline phase transition of oriented isotactic polybutene-1 investigated by temperature-dependent time-resolved simultaneous WAXD/SAXS measurements. Polymer 2016 , 90 , 165−177..

Wang, D.; Russell, T. P. Advances in atomic force microscopy for probing polymer structure and properties. Macromolecules 2018 , 51 , 3−24..

Tri, P. N.; Prud’homme, R. E. Crystallization and segregation behavior at the submicrometer scale of PCL/PEG blends. Macromolecules 2018 , 51 , 7266−7273..

Zhang, C. G.; Hu, H. Q.; Wang, X. H.; Yao, Y. H.; Dong, X.; Wang, D. J.; Wang, Z. G.; Han, C. C. Formation of cylindrite structures in shear-induced crystallization of isotactic polypropylene at low shear rate. Polymer 2007 , 48 , 1105−1115..

Trifonova, D.; Varga, J.; Vancso, G. J. AFM study of lamellar thickness distributions in high temperature melt-crystallization of β -polypropylene. Polym. Bull. 1998 , 41 , 341−348..

Lee, M. S.; Chen, S. A. The enhancement of polybutene-1 crystallinity in polybutene-1/polypropylene blends. J. Polym. Sci. Part C: Polym. Lett. 1987 , 25 , 37−43..

Nie, H. R. Xiao, W. J.; Ma, Y. P.; Liu, C. G.; He, A. H. High-performance isotactic poly(1-butene)/isotactic polypropylene alloys with in-situ -synthesized poly(propylene- co -butene). Ind. Eng. Chem. Res. 2019 , 58 , 6919−6924..

Zhang, X. H.; Wang, Z. G.; Muthukumar, M.; Han, C. C. Fluctuation-assisted crystallization: in a simultaneous phase separation and crystal lization polyolefin blend system. Macromol. Rapid. Commun. 2005 , 26 , 1285−1288..

Hong, S.; Zhang, X. H.; Zhang, R. Y.; Wang, L.; Zhao, J.; Han, C. C. Liquid-liquid phase separation and crystallization in thin films of a polyolefin blend. Macromolecules 2008 , 41 , 2311−2314..

Cheng, J. G.; Zhong, Z. X.; Lin, Y.; Su, Z. H.; Zhang, C. Y.; Zhang, X. Q. Miscibility of isotactic poly(1-butene)/isotactic polypropylene blends studied by atomic force Microscopy-Infrared. Polymer 2022 , 239 , 124445..

Varga, J.; Karger-Kocsis, J. Rules of supermolecular structure formation in sheared isotactic polypropylene melts. J. Polym. Sci., Part B: Polym. Phys. 1996 , 34 , 657−670..

Somani, R. H.; Hsiao, B. S.; Nogales, A.; Fruitwala, H.; Srinivas, S.; Tsou, A. H. Structure development during shear flow induced crystallization ofi-PP: in situ wide-angle X-ray diffraction study. Macromolecules 2001 , 34 , 5902−5909..

Liu, Q.; Sun, X. L.; Li, H. H.; Yan, S. K. Orientation-induced cry stallization of isotactic polypropylene. Polymer 2013 , 54 , 4404−4421..

Lou, B. J.; Li, H. F.; Zhou, C. B.; Zhang, W. Y.; Li, J. Q.; He, X. H.; Jiang, S. C. Mechanistic insights into the shear-induced β -form crystal formation of iPP. Macromol. Chem. Phys. 2016 , 217 , 1354−1360..

Chen, Y. H.; Mao, Y. M.; Li, Z. M.; Hsiao, B. S. Competitive growth of α - and β -crystals in β -nucleated isotactic polypropylene under shear flow. Macromolecules 2010 , 43 , 6760−6771..

Li, H. H.; Zhang, X. Q.; Duan, Y. X.; Wang, D. J.; Li, L.; Yan, S. K. Influence of crystallization temperature on the morphologies of isotactic polypropylene single-polymer composite. Polymer 2004 , 45 , 8059−8065..

Zhao, J.; Zhang, J. H.; Jing, M. F.; Sui, G. P.; Liu, D. Y.; Wang, K.; Fu, Q. Correlations between microstructure of α -row nuclei and polymorphism of shear-induced iPP/carbon fiber cylindrite. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57 , 368−377..

Huo, H.; Jiang, S. C.; An, L. J.; Feng, J. C. Influence of shear on crystallization behavior of the β phase in isotactic polypropylene with β -nucleating agent. Macromolecules 2004 , 37 , 2478−2483..

Zhang, C. G.; Hu, H. Q.; Wang, D. J.; Yan, S. K.; Han, C. C. In situ optical microscope study of the shear-induced crystallization of isotactic polypropylene. Polymer 2005 , 46 , 8157-8161..

Zhang, B.; Chen, J. B.; Ji, F. F.; Zhang, X. L.; Zheng, G. Q.; Shen, C. Y. Effects of melt structure on shear-induced β -cylindrites of isotactic polypropylene. Polymer 2012 , 53 , 1791−1800..

Sun, X. L.; Li, H. H.; Wang, J. J.; Yan, S. K. Shear-induced interfacial structure of isotactic polypropylene (iPP) in iPP/fiber composites. Macromolecules 2006 , 39 , 8720−8726..

浏览量

245

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Two-way Shape Memory Effect of Polycaprolactone-based Polyurethane via Synergistic Role of Hydrogen Bonding and Crystallization Tuned by Malic Acid

Spontaneous Gauged O(N) Symmetry Breaking in Polymer Crystallization

Multiple-Responsive Chiral Hydrogels from Helical Dendronized Poly(phenylacetylene)s

Preparation and Chiral Recognition Ability of Crystalline Cellulose Phenylcarbamate

Molecularly Engineered Polyimide Films with Switchable Cavitation for Bidirectional Passive Thermal Regulation

The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends

The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends

DOI：10.1007/s10118-024-3240-3

摘要

Abstract

关键词

Keywords

references