Interfacial Engineering of Polymer Blend with Janus Particle as Compatibilizer

Hai-Ling He; Fu-Xin Liang

doi:10.1007/s10118-022-2878-y

Your Location：

Home >

Browse articles >

Interfacial Engineering of Polymer Blend with Janus Particle as Compatibilizer

REVIEW | Updated：2023-03-07

- Interfacial Engineering of Polymer Blend with Janus Particle as Compatibilizer
- Interfacial Engineering of Polymer Blend with Janus Particle as Compatibilizer
- 高分子科学（英文版） 2023年41卷第4期页码：500-515
- Affiliations：
  
  Institute of Polymer Science and Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
- Author bio：
  
  liangfuxin@tsinghua.edu.cn
- Funds：
  
  This work was financially supported by the National Natural Science Foundation of China (Nos. 52173076 and 52042302), China Postdoctoral Science Foundation (No. 2021M701825), Tsinghua-Foshan Innovation Special Fund (TFISF) (No. 2021THFS0212), and Joint Agency Affiliate Projects of China Petroleum & Chemical Corporation (No. 20212930037).;Fu-Xin Liang received his Ph.D. degree from Institute of Chemistry, Chinese Academy of Sciences (ICCAS) in 2011. He started his academic career at ICCAS from assistant professor (2011−2013) to associate professor (2013−2017) to professor (2017−2019). In 2019, he joined the Department of Chemical Engineering at Tsinghua University as an associate professor. His research works focus on design of amphiphilic Janus materials and their application in polymer composite such as polymer blends, and functional coating.
- DOI：10.1007/s10118-022-2878-y
  中图分类号：
- 收稿：2022-08-09，
  
  修回：2022-10-5，
  
  录用：2022-10-10，
  
  网络首发：2022-12-28，
  
  纸质出版：2023-04-01
- Accepted：
Scan QR Code
He, H. L.; Liang, F. X. Interfacial engineering of polymer blend with Janus particle as compatibilizer. Chinese J. Polym. Sci. 2023, 41, 500–515

Hai-Ling He, Fu-Xin Liang. Interfacial Engineering of Polymer Blend with Janus Particle as Compatibilizer[J]. Chinese Journal of Polymer Science, 2023, 41(4): 500-515.
He, H. L.; Liang, F. X. Interfacial engineering of polymer blend with Janus particle as compatibilizer. Chinese J. Polym. Sci. 2023, 41, 500–515 DOI： 10.1007/s10118-022-2878-y.

Hai-Ling He, Fu-Xin Liang. Interfacial Engineering of Polymer Blend with Janus Particle as Compatibilizer[J]. Chinese Journal of Polymer Science, 2023, 41(4): 500-515. DOI： 10.1007/s10118-022-2878-y.

摘要

Janus nanofillers of various morphologies

including spherical

snowman-like

and two-dimensional nanosheets

as the interfacial compatibilizers of polymer blends

and their impacts on phase morphologies

mechanical properties

and functionalities of blends have been overviewed. It could provide a guidance for designing effective Janus particle compatibilizer to develop high-performance and multifunctional blends.

Abstract

Mixing two or more polymers to produce the “polymer alloy” is one of the most versatile and economical strategies for developing new polymeric materials. The compatibility between polymer components largely determines the comprehensive performance of polymer blend. More recently

a type of unique surface partitioned materials

Janus particles

has been proposed to act as a novel interfacial compatibilizer for polymer blends. Such Janus particles integrates the amphipathicity of diblock copolymer and interfacial stabilization of nanoparticles

displaying a significant superiority in comparison with molecular compatibilizers for a wide range of polymer blends. In this review

we mainly focus on the compatibilizing effects of Janus nanofillers of various morphologies

including spherical

snowman-like

and two-dimensional nanosheets

on polymer blends. We shed light on the impacts of compatibilization of Janus particles on phase morphologies

mechanical properties

and functionalities of polymer blends. This review could provide a guidance for designing an effective Janus particle compatibilizer to develop high-performance polymer blends.

关键词

Keywords

references

Cardinale’s, R.; Moldenaers, P., in Morphology development in immiscible polymer blends. Polymer Morphology: Principles, Characterization and Properties , Ed. by Guo, Q., John Wiley & Sons, 2016 ; Chapter 19, pp. 348-373.

Thomas, S.; Grohens, Y.; Jyotishkumar, P., in Characterization of polymer blends: miscibility, morphology and interfaces , John Wiley & Sons, 2014 ; Chapter 1, pp. 1−3.

Sinha Ray, S.; Bousmina, M. . Compatibilization efficiency of organoclay in an immiscible polycarbonate/poly(methyl methacrylate) blend . Macromol. Rapid Commun. , 2005 . 26 450 - 455 . DOI: 10.1002/marc.200400586 http://doi.org/10.1002/marc.200400586 .

Utracki, L. A. . Compatibilization of polymer blends . Can. J. Chem. Eng. , 2002 . 80 1008 - 1016 . DOI: 10.1002/cjce.5450800601 http://doi.org/10.1002/cjce.5450800601 .

Elias, L.; Fenouillot, F.; Majesté, J . C.; Alcouffe, P.; Cassagnau, P. Immiscible polymer blends stabilized with nano-silica particles: rheology and effective interfacial tension . Polymer , 2008 . 49 4378 - 4385 . DOI: 10.1016/j.polymer.2008.07.018 http://doi.org/10.1016/j.polymer.2008.07.018 .

Dai, K. H.; Kramer, E. J.; Shull, K. R. . Interfacial segregation in two-phase polymer blends with diblock copolymer additives: the effect of homopolymer molecular weight . Macromolecules , 1992 . 25 220 - 225 . DOI: 10.1021/ma00027a037 http://doi.org/10.1021/ma00027a037 .

Wang, X. F.; Zhang, Z. X.; Yang, J. H.; Wang, Y.; Zhang, J. H . Largely improved fracture toughness of an immiscible poly(L-lactide)/ethylene- co -vinyl acetate blend achieved by adding carbon nanotubes . RSC Adv. , 2015 . 5 69522 - 69533 . DOI: 10.1039/C5RA11192G http://doi.org/10.1039/C5RA11192G .

Liang, F. X.; Zhang, C. L.; Yang, Z. Z . Rational design and synthesis of Janus composites . Adv. Mater. , 2014 . 26 6944 - 6949 . DOI: 10.1002/adma.201305415 http://doi.org/10.1002/adma.201305415 .

Jiang, S.; Chen, Q.; Tripathy, M.; Luijten, E.; Schweizer, K. S.; Granick, S . Janus particle synthesis and assembly . Adv. Mater. , 2010 . 22 1060 - 1071 . DOI: 10.1002/adma.200904094 http://doi.org/10.1002/adma.200904094 .

Cardinaels, R., in Compatibilization of polymer blends: micro and nano scale phase morphologies, interphase characterization, and properties , eds. by Ajitha, A. R., Thomas, S., Elsevier, Netherlands, 2020 , Chapter 8, p. 253−270.

Hou, Y.; Zhang, G. L.; Tang, X. P.; Si, Y.; Song, X. M.; Liang, F. X.; Yang, Z. Z . Janus nanosheets synchronously strengthen and toughen polymer blends . Macromolecules , 2019 . 52 3863 - 3868 . DOI: 10.1021/acs.macromol.9b00598 http://doi.org/10.1021/acs.macromol.9b00598 .

Guan, J. P.; Gui, H. G.; Zheng, Y. Y.; You, J. C.; Li, Y. J.; Liang, F. X.; Yang, Z. Z . Stabilizing polymeric interface by Janus nanosheet . Macromol. Rapid Commun. , 2020 . 41 2000392 DOI: 10.1002/marc.202000392 http://doi.org/10.1002/marc.202000392 .

Sharifzadeh E . Modeling of the mechanical properties of blend based polymer nanocomposites considering the effects of Janus nanoparticles on polymer/polymer interface . Chinese J. Polym. Sci. , 2019 . 37 164 - 177 . DOI: 10.1007/s10118-019-2178-3 http://doi.org/10.1007/s10118-019-2178-3 .

Robeson, L. M. Polymer blends. A comprehensive review, 2007 , 641.

Paul, D. R. Polymer Blends . Volume 1 (Vol. 1). Elsevier, 2012 .

Paul, D. R.; Barlow, J. W . A binary interaction model for miscibility of copolymers in blends . Polymer , 1984 . 25 487 - 494 . DOI: 10.1016/0032-3861(84)90207-6 http://doi.org/10.1016/0032-3861(84)90207-6 .

Djordjevic, M. B.; Porter, R. S . NMR characterization of intermolecular interactions for polymers, IV. Intermolecular interactions of low molecular weight analogues for compatible blends of polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide) . Polym. Eng. Sci. , 1983 . 23 650 - 657 . DOI: 10.1002/pen.760231203 http://doi.org/10.1002/pen.760231203 .

Tjong, S. C.; Meng, Y. Z . Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-butadiene-styrene) blends . Eur. Polym. J. , 2000 . 36 123 - 129 . DOI: 10.1016/S0014-3057(99)00044-0 http://doi.org/10.1016/S0014-3057(99)00044-0 .

Macosko, C. W., in Morphology development and control in immiscible polymer blends . In Macromolecular Symposia, Vol. 149, WILEY-VCH Verlag, Weinheim, 2000 , p. 171

Pötschke, P.; Paul, D. R . Formation of co-continuous structures in melt-mixed immiscible polymer blends . J. Macromol. Sci.-Polym. Rev , 2003 . 43 87 - 141 . DOI: 10.1081/MC-120018022 http://doi.org/10.1081/MC-120018022 .

Lyngaae-Jørgensen, J.; Utracki, L. A. in Dual phase continuity in polymer blends. In Makromolekulare Chemie. Macromolecular Symposia, Basel: Hüthig & Wepf Verlag, 1991 , p. 189

He, J.; Bu, W.; Zeng, J . Co-phase continuity in immiscible binary polymer blends . Polymer , 1997 . 38 6347 - 6353 . DOI: 10.1016/S0032-3861(97)00212-7 http://doi.org/10.1016/S0032-3861(97)00212-7 .

Li, Y.; Shimizu, H . Novel morphologies of poly(phenylene oxide)(PPO)/polyamide 6 (PA6) blend nanocomposites . Polymer , 2004 . 45 7381 - 7388 . DOI: 10.1016/j.polymer.2004.09.018 http://doi.org/10.1016/j.polymer.2004.09.018 .

Metelkin, V. I.; Blekht, V. S . Formation of a continuous phase in heterogeneous mixtures of polymers . Kolloidnyi Zhurnal , 1984 . 46 476 - 480 . .

Kozlowski, M . The formation of interpenetrating polymer blends . J. Polym. Eng. , 1995 . 14 15 - 40 . .

Noolandi, J.; Hong, K. M . Interfacial properties of immiscible homopolymer blends in the presence of block copolymers . Macromolecules , 1982 . 15 482 - 492 . DOI: 10.1021/ma00230a054 http://doi.org/10.1021/ma00230a054 .

Zhang, J. B.; Ji, S. X.; Song, J.; Lodge, T. P.; Macosko, C. W . Flow accelerates interfacial coupling reactions . Macromolecules , 2010 . 43 7617 - 7624 . DOI: 10.1021/ma100889p http://doi.org/10.1021/ma100889p .

Koning, C.; Duin, M . V.; Pagnoulle, C.; Jerome, R. Strategies for compatibilization of polymer blends . Prog. Polym. Sci. , 1998 . 23 707 - 757 . DOI: 10.1016/S0079-6700(97)00054-3 http://doi.org/10.1016/S0079-6700(97)00054-3 .

Bell, J. R.; Chang, K.; López-Barrón, C. R.; Macosko, C. W.; Morse, D. C . Annealing of cocontinuous polymer blends: effect of block copolymer molecular weight and architecture . Macromolecules , 2010 . 43 5024 - 5032 . DOI: 10.1021/ma902805x http://doi.org/10.1021/ma902805x .

Zhao, X. W., Surface modification of carbon nanoparticles and the compatibilization effects on PVDF/PLLA blends , Thesis, Hangzhou Normal University, 2019 .

Su, S.; Kopitzky, R.; Tolga, S.; Kabasci, S . Polylactide (PLA) and its blends with poly(butylene succinate) (PBS): a brief review . Polymers , 2019 . 11 1193 DOI: 10.3390/polym11071193 http://doi.org/10.3390/polym11071193 .

He, L.; Song, F.; Li, D. F.; Zhao, X.; Wang, X. L.; Wang, Y. Z . Strong and tough polylactic acid based composites enabled by simultaneous reinforcement and interfacial compatibilization of microfibrillated cellulose . ACS Sustain. Chem. Eng. , 2020 . 8 1573 - 1582 . DOI: 10.1021/acssuschemeng.9b06308 http://doi.org/10.1021/acssuschemeng.9b06308 .

Chen, G. X.; Kim, H. S.; Kim, E. S.; Yoon, J. S . Compatibilization-like effect of reactive organoclay on the poly( L -lactide)/poly(butylene succinate) blends . Polymer , 2005 . 46 11829 - 11836 . DOI: 10.1016/j.polymer.2005.10.056 http://doi.org/10.1016/j.polymer.2005.10.056 .

Wu, W.; Wu, C. K.; Peng, H. Y.; Sun, Q. J.; Zhou, L.; Zhuang, J. Q.; Cao, X. W.; Roy, V. A. L.; Li, R. K. Y . Effect of nitrogen-doped graphene on morphology and properties of immiscible poly(butylene succinate)/polylactide blends . Compos. Pt. B-Eng. , 2017 . 113 300 - 307 . DOI: 10.1016/j.compositesb.2017.01.037 http://doi.org/10.1016/j.compositesb.2017.01.037 .

Tan, L. C.; He, Y.; Qu, J. P . Structure and properties of Polylactide/poly(butylene succinate)/organically Modified Montmorillonite nanocomposites with high-efficiency intercalation and exfoliation effect manufactured via volume pulsating elongation flow . Polymer , 2019 . 180 121656 DOI: 10.1016/j.polymer.2019.121656 http://doi.org/10.1016/j.polymer.2019.121656 .

Wang, X. M.; Zhuang, Y. G.; Dong, L. S . Study of carbon black-filled poly(butylene succinate)/polylactide blend . J. Appl. Polym. Sci. , 2012 . 126 1876 - 1884 . DOI: 10.1002/app.36944 http://doi.org/10.1002/app.36944 .

Zou, Z. M.; Sun, Z. Y.; An, L. J . Studies on droplet size distributions during coalescence in immiscible polymer blends filled with silica nanoparticles . Chinese J. Polym. Sci. , 2014 . 32 255 - 267 . DOI: 10.1007/s10118-014-1411-3 http://doi.org/10.1007/s10118-014-1411-3 .

Anastasiadis, S. H.; Gancarz, I.; Koberstein, J. T . Compatibilizing effect of block copolymers added to the polymer/polymer interface . Macromolecules , 1989 . 22 1449 - 1453 . DOI: 10.1021/ma00193a074 http://doi.org/10.1021/ma00193a074 .

Adedeji, A.; Lyu, S.; Macosko, C. W . Block copolymers in homopolymer blends: interface vs micelles . Macromolecules , 2001 . 34 8663 - 8668 . DOI: 10.1021/ma001944b http://doi.org/10.1021/ma001944b .

Ginzburg, V. V . Influence of nanoparticles on miscibility of polymer blends. A simple theory . Macromolecules , 2005 . 38 2362 - 2367 . DOI: 10.1021/ma0482821 http://doi.org/10.1021/ma0482821 .

Virgilio, N.; Favis, B. D . Self-assembly of Janus composite droplets at the interface in quaternary immiscible polymer blends . Macromolecules , 2011 . 44 5850 - 5856 . DOI: 10.1021/ma200647t http://doi.org/10.1021/ma200647t .

Walther, A.; Matussek, K.; Müller, A. H. E . Engineering nanostructured polymer blends with controlled nanoparticle location using Janus particles . ACS Nano , 2008 . 2 1167 - 1178 . DOI: 10.1021/nn800108y http://doi.org/10.1021/nn800108y .

Walther, A.; Müller, A. H. E . Janus particles: synthesis, self-assembly, physical properties, and applications . Chem. Rev. , 2013 . 113 5194 - 5261 . DOI: 10.1021/cr300089t http://doi.org/10.1021/cr300089t .

Erhardt, R.; Böker, A.; Zettl, H.; Kaya, H.; Pyckhout-Hintzen, W.; Krausch, G.; Abetz V.; Müller, A. H. E . Janus micelles . Macromolecules , 2001 . 34 1069 - 1075 . DOI: 10.1021/ma000670p http://doi.org/10.1021/ma000670p .

Bayer, U.; Stadler, R. Synthesis and properties of amphiphilic “dumbbell”-shaped grafted block copolymers, 1 . Anionic synthesis via a polyfunctional initiator . Macromol. Chem. Phys. , 1994 . 195 2709 - 2722 . DOI: 10.1002/macp.1994.021950803 http://doi.org/10.1002/macp.1994.021950803 .

Förster, S.; Antonietti, M . Amphiphilic block copolymers in structure-controlled nanomaterial hybrids . Adv. Mater. , 1998 . 10 195 - 217 . DOI: 10.1002/(SICI)1521-4095(199802)10:3<195::AID-ADMA195>3.0.CO;2-V http://doi.org/10.1002/(SICI)1521-4095(199802)10:3<195::AID-ADMA195>3.0.CO;2-V .

Stewart, S.; Liu, G . Hollow nanospheres from polyisoprene-block-poly (2-cinnamoylethyl methacrylate)-block-poly( tert -butyl acrylate) . Chem. Mater. , 1999 . 11 1048 - 1054 . DOI: 10.1021/cm981009r http://doi.org/10.1021/cm981009r .

Bieringer, R.; Abetz, V.; Müller, A. H. E . Triblock copolyampholytes from 5-( N,N -dimethylamino) isoprene, styrene, and methacrylic acid: synthesis and solution properties . Eur. Phys. J. E , 2001 . 5 5 - 12 . DOI: 10.1007/s101890170081 http://doi.org/10.1007/s101890170081 .

Sun, Y. J.; Liang, F. X.; Qu, X. Z.; Wang, Q.; Yang, Z. Z . Robust reactive Janus composite particles of snowman shape . Macromolecules , 2015 . 48 2715 - 2722 . DOI: 10.1021/acs.macromol.5b00207 http://doi.org/10.1021/acs.macromol.5b00207 .

Yu, X. T.; Sun, Y. J.; Liang, F. X.; Jiang, B. Y.; Yang, Z. Z . Triblock Janus particles by seeded emulsion polymerization . Macromolecules , 2019 . 52 96 - 102 . DOI: 10.1021/acs.macromol.8b02101 http://doi.org/10.1021/acs.macromol.8b02101 .

Liang, F. X.; Shen, K.; Qu, X. Z.; Zhang, C. L.; Wang, Q., Li, J. G.; Yang, Z. Z . Inorganic Janus nanosheets . Angew. Chem. Int. Edit. , 2011 . 50 2379 - 2382 . DOI: 10.1002/anie.201007519 http://doi.org/10.1002/anie.201007519 .

Chen, Y.; Liang, F. X.; Yang, H. L.; Zhang, C. L.; Wang, Q.; Qu, X. Z.; Yang, Z. Z . Janus nanosheets of polymer-inorganic layered composites . Macromolecules , 2012 . 45 1460 - 1467 . DOI: 10.1021/ma2021908 http://doi.org/10.1021/ma2021908 .

Liu, Y.; Abetz, V.; Müller, A. H . Janus cylinders . Macromolecules , 2003 . 36 7894 - 7898 . DOI: 10.1021/ma0345551 http://doi.org/10.1021/ma0345551 .

Xia, Y.; Olsen, B. D.; Kornfield, J. A.; Grubbs, R. H . Efficient synthesis of narrowly dispersed brush copolymers and study of their assemblies: the importance of side chain arrangement . J. Am. Chem. Soc. , 2009 . 131 18525 - 18532 . DOI: 10.1021/ja908379q http://doi.org/10.1021/ja908379q .

Zhao, X.; Wang, H.; Fu, Z.; Li, Y . Enhanced interfacial adhesion by reactive carbon nanotubes: new route to high-performance immiscible polymer blend nanocomposites with simultaneously enhanced toughness, tensile strength, and electrical conductivity . ACS Appl. Mater. Interfaces , 2018 . 10 8411 - 8416 . DOI: 10.1021/acsami.8b01704 http://doi.org/10.1021/acsami.8b01704 .

Fu, Z.; Wang, H.; Zhao, X.; Li, X.; Gu, X.; Li, Y . Flame-retarding nanoparticles as the compatibilizers for immiscible polymer blends: simultaneously enhanced mechanical performance and flame retardancy . J. Mater. Chem. A , 2019 . 7 4903 - 4912 . DOI: 10.1039/C8TA12233D http://doi.org/10.1039/C8TA12233D .

Li, X.; Fu, Z.; Gu, X.; Liu, H.; Wang, H.; Li, Y . Interfacially located nanoparticles: Barren nanorods versus polymer grafted nanorods . Compos. Pt. B-Eng. , 2020 . 198 108153 DOI: 10.1016/j.compositesb.2020.108153 http://doi.org/10.1016/j.compositesb.2020.108153 .

Bryson, K. C.; Löbling, T. I.; Müller, A. H. E.; Russell, T. P.; Hayward, R. C . Using Janus nanoparticles to trap polymer blend morphologies during solvent-evaporation-induced demixing . Macromolecules , 2015 . 48 4220 - 4227 . DOI: 10.1021/acs.macromol.5b00640 http://doi.org/10.1021/acs.macromol.5b00640 .

Bahrami, R.; Löbling, T. I.; Gröschel, A. H.; Schmalz, H.; Müller, A. H. E.; Altstädt, V . The impact of Janus nanoparticles on the compatibilization of immiscible polymer blends under technologically relevant conditions . ACS Nano , 2014 . 8 10048 - 10056 . DOI: 10.1021/nn502662p http://doi.org/10.1021/nn502662p .

Wang, H. T.; Fu, Z. A.; Zhao, X. W.; Li, Y. J.; Li, J. Y . Reactive nanoparticles compatibilized immiscible polymer blends: synthesis of reactive SiO 2 with long poly(methyl methacrylate) chains and the in situ formation of Janus SiO 2 nanoparticles anchored exclusively at the interface . ACS Appl. Mater. Interfaces , 2017 . 9 14358 - 14370 . DOI: 10.1021/acsami.7b01728 http://doi.org/10.1021/acsami.7b01728 .

Wang, H.; Dong, W.; Li, Y . Compatibilization of immiscible polymer blends using in situ formed Janus nanomicelles by reactive blending . ACS Macro Lett. , 2015 . 4 1398 - 1403 . DOI: 10.1021/acsmacrolett.5b00763 http://doi.org/10.1021/acsmacrolett.5b00763 .

Wang, H. T.; Fu, Z. A.; Dong, W. Y.; Li, Y. J.; Li, J. Y . Formation of interfacial Janus nanomicelles by reactive blending and their compatibilization effects on immiscible polymer blends . J. Phys. Chem. B , 2016 . 120 9240 - 9252 . DOI: 10.1021/acs.jpcb.6b06761 http://doi.org/10.1021/acs.jpcb.6b06761 .

Fu, Z.; Wang, H.; Zhao, X.; Horiuchi, S.; Li, Y . Immiscible polymer blends compatibilized with reactive hybrid nanoparticles: Morphologies and properties . Polymer , 2017 . 132 353 - 361 . DOI: 10.1016/j.polymer.2017.11.004 http://doi.org/10.1016/j.polymer.2017.11.004 .

Nie, H.; Zhang, C.; Liu, Y.; He, A . Synthesis of Janus rubber hybrid particles and interfacial behavior . Macromolecules , 2016 . 49 2238 - 2244 . DOI: 10.1021/acs.macromol.6b00159 http://doi.org/10.1021/acs.macromol.6b00159 .

Xu, W.; Chen, J.; Chen, S.; Chen, Q.; Lin, J.; Liu, H . Study on the compatibilizing effect of Janus particles on liquid isoprene rubber/epoxy resin composite materials . Ind. Eng. Chem. Res. , 2017 . 56 14060 - 14068 . DOI: 10.1021/acs.iecr.7b03200 http://doi.org/10.1021/acs.iecr.7b03200 .

Cheng, W.; Xu, Z.; Chen, S.; Ai, J.; Lin, J.; Lin, J.; Chen, Q . Compatibilization behavior of double spherical TETA–SiO 2 @PDVB Janus particles anchored at the phase interface of acrylic resin/epoxy resin (AR/EP) polymer blends . ACS omega , 2019 . 4 17607 - 17614 . DOI: 10.1021/acsomega.9b00793 http://doi.org/10.1021/acsomega.9b00793 .

Parpaite, T.; Otazaghine, B.; Caro, A. S.; Taguet, A.; Sonnier, R.; Lopez-Cuesta, J. M . Janus hybrid silica/polymer nanoparticles as effective compatibilizing agents for polystyrene/polyamide-6 melted blends . Polymer , 2016 . 90 34 - 44 . DOI: 10.1016/j.polymer.2016.02.044 http://doi.org/10.1016/j.polymer.2016.02.044 .

Caro, A. S.; Parpaite, T.; Otazaghine, B.; Taguet, A.; Lopez-Cuesta, J. M . Viscoelastic properties of polystyrene/polyamide-6 blend compatibilized with silica/polystyrene Janus hybrid nanoparticles . J. Rheol. , 2017 . 61 305 - 310 . DOI: 10.1122/1.4975334 http://doi.org/10.1122/1.4975334 .

You, W.; Yu, W . Onset reduction and stabilization of cocontinuous morphology in immiscible polymer blends by snowmanlike Janus nanoparticles . Langmuir , 2018 . 34 11092 - 11100 . DOI: 10.1021/acs.langmuir.8b02503 http://doi.org/10.1021/acs.langmuir.8b02503 .

He, H.; Liang, F . Engineering polymer blends with controllable interfacial location of Janus particles as compatibilizers . Chem. Mater. , 2022 . 34 3806 - 3818 . DOI: 10.1021/acs.chemmater.2c00307 http://doi.org/10.1021/acs.chemmater.2c00307 .

Nie, H.; Liang, X.; He, A . Enthalpy-enhanced Janus nanosheets for trapping nonequilibrium morphology of immiscible polymer blends . Macromolecules , 2018 . 51 2615 - 2620 . DOI: 10.1021/acs.macromol.8b00039 http://doi.org/10.1021/acs.macromol.8b00039 .

Han, X.; Liang, X.; Cai, L.; He, A.; Nie, H . Amphiphilic Janus nanosheets by grafting reactive rubber brushes for reinforced rubber materials . Polym. Chem. , 2019 . 10 5184 - 5190 . DOI: 10.1039/C9PY00863B http://doi.org/10.1039/C9PY00863B .

Weiss, S.; Hirsemann, D.; Biersack, B.; Ziadeh, M.; Müller, A. H. E.; Breu, J . Hybrid Janus particles based on polymer-modified kaolinite . Polymer , 2013 . 54 1388 - 1396 . DOI: 10.1016/j.polymer.2012.12.041 http://doi.org/10.1016/j.polymer.2012.12.041 .

Hu, L.; Han, Y.; Rong, C.; Wang, X.; Wang, H.; Li, Y . Interfacial engineering with rigid nanoplatelets in immiscible polymer blends: interface strengthening and interfacial curvature controlling . ACS Appl. Mater. Interfaces , 2022 . 14 11016 - 11027 . DOI: 10.1021/acsami.1c24817 http://doi.org/10.1021/acsami.1c24817 .

Zhang, M.; Jiang, C.; Wu, Q.; Zhang, G.; Liang, F.; Yang, Z . Poly(lactic acid)/poly(butylene succinate) (PLA/PBS) layered composite gas barrier membranes by anisotropic Janus nanosheets compatibilizers . ACS Macro Lett. , 2022 . 11 657 - 662 . DOI: 10.1021/acsmacrolett.2c00139 http://doi.org/10.1021/acsmacrolett.2c00139 .

Huang, M.; Li, Z.; Guo, H . The effect of Janus nanospheres on the phase separation of immiscible polymer blends via dissipative particle dynamics simulations . Soft Matter , 2012 . 8 6834 - 6845 . DOI: 10.1039/c2sm25086a http://doi.org/10.1039/c2sm25086a .

Huang, M.; Guo, H . The intriguing ordering and compatibilizing performance of Janus nanoparticles with various shapes and different dividing surface designs in immiscible polymer blends . Soft Matter , 2013 . 9 7356 - 7368 . DOI: 10.1039/c3sm50957e http://doi.org/10.1039/c3sm50957e .

Zhou, Y.; Huang, M.; Lu, T.; Guo, H . Nanorods with different surface properties in directing the compatibilization behavior and the morphological transition of immiscible polymer blends in both shear and shear-free conditions . Macromolecules , 2018 . 51 3135 - 3148 . DOI: 10.1021/acs.macromol.7b02624 http://doi.org/10.1021/acs.macromol.7b02624 .

Zhou, C.; Luo, S. K.; Sun, Y.; Zhou, Y.; Qian, W. . Dissipative particle dynamics studies on the interfacial tension of A/B homopolymer blends and the effect of Janus nanorods . J. Appl. Polym. Sci. , 2016 . 133 DOI: 10.1002/app.44098 http://doi.org/10.1002/app.44098 .

Estridge, C. E.; Jayaraman, A . Diblock copolymer grafted particles as compatibilizers for immiscible binary homopolymer blends . ACS Macro Lett. , 2015 . 4 155 - 159 . DOI: 10.1021/mz500793e http://doi.org/10.1021/mz500793e .

Li, W.; Dong, B.; Yan, L. T . Janus nanorods in shearing-to-relaxing polymer blends . Macromolecules , 2013 . 46 7465 - 7476 . DOI: 10.1021/ma4009884 http://doi.org/10.1021/ma4009884 .

浏览量

543

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

One-step Preparation of Brush-type Polystyrene (PS)-SiO2-Poly(2-hydroxyethyl methacrylate) Janus Nanoparticle to Compatibilize PS/Poly(methyl methacrylate) Blends

Fabrication of Highly Anisotropic and Interconnected Porous Scaffolds to Promote Preosteoblast Proliferation for Bone Tissue Engineering

Effect of Olefin-based Compatibilizers on the Formation of Cocontinuous Structure in Immiscible HDPE/iPP Blends

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport

A Paradigm for BF3 Co-initiated Cationic Polymerization with Low Dispersity: Introducing Acetonitrile and Lowering the Reaction Temperature