Controlled Wettability of Polymers <italic style="font-style: italic">via</italic> Environmental Crazing

Alena Yu. Yarysheva; Larisa M. Yarysheva; Fedor V. Drozdov; Olga V. Arzhakova; Aziz M. Muzafarov

doi:10.1007/s10118-022-2765-6

Your Location：

Home >

Browse articles >

Controlled Wettability of Polymers via Environmental Crazing

RESEARCH ARTICLE | Updated：2022-09-23

- Controlled Wettability of Polymers via Environmental Crazing
- Controlled Wettability of Polymers via Environmental Crazing
- Chinese Journal of Polymer Science 2022年40卷第10期页码：1307-1314
- Affiliations：
  
  a.Faculty of Chemistry, Lomonosov Moscow State University, Leninskie Gory 1-3, Moscow 119991, Russia
  b.Institute of Synthetic Polymer Materials RAS, ul. Profsoyuznaya 70, Moscow 117393, Russia
- Author bio：
  
  alyonusha@gmail.com
- Funds：
  
  We acknowledge funding from the Ministry of Science and Higher Education of the Russian Federation (Agreement No. 075-15-2020-794).
- DOI：10.1007/s10118-022-2765-6
  中图分类号：
- 收稿：2022-02-08，
  
  修回：2022-4-4，
  
  录用：2022-4-18，
  
  网络首发：2022-07-20，
  
  纸质出版：2022-10-01
- Accepted：
Scan QR Code
Yarysheva, A. Y.; Yarysheva, L. M.; Drozdov, F. V.; Arzhakova, O. V.; Muzafarov, A. M. Controlled wettability of polymers via environmental crazing. Chinese J. Polym. Sci. 2022, 40, 1307–1314

Alena Yu. Yarysheva, Larisa M. Yarysheva, Fedor V. Drozdov, et al. Controlled Wettability of Polymers via Environmental Crazing[J]. Chinese Journal of Polymer Science, 2022, 40(10): 1307-1314. DOI: 10.1007/s10118-022-2765-6.
Yarysheva, A. Y.; Yarysheva, L. M.; Drozdov, F. V.; Arzhakova, O. V.; Muzafarov, A. M. Controlled wettability of polymers via environmental crazing. Chinese J. Polym. Sci. 2022, 40, 1307–1314 DOI： 10.1007/s10118-022-2765-6.

Alena Yu. Yarysheva, Larisa M. Yarysheva, Fedor V. Drozdov, et al. Controlled Wettability of Polymers via Environmental Crazing[J]. Chinese Journal of Polymer Science, 2022, 40(10): 1307-1314. DOI: 10.1007/s10118-022-2765-6. DOI：

摘要

The introduction of a hydrophilic/hydrophobic additive into the mesoporous structure of the host matrix via crazing makes it possible to control the polymer wettability.

Abstract

This work highlights the benefits of environmental crazing for the control over the hydrophilic-lipophilic balance of glassy amorphous and semicrystalline polymers: poly(ethylene terephthalate) (PET) and biodegradable polycaprolactone (PCL). Task-oriented encapsulation of diverse commercial and natural hydrophilic (polyethyleneoxide

polyvinylpyrrolidone

gelatin) and hydrophobic guest additives (perfluoroorgano siloxanes

water-repellent impregnation) into mesoporous host polymer (PET

PCL) matrixes allows targeted control over the wettability of the resultant nanocomposite materials. Depending on the nature of the guest additive

the properties of the modified polymers can be varied from hydrophilic to hydrophobic: contact angle (CA) of PET can be adjusted from 47

┴

/38

׀׀

to 130

┴

/117

׀׀

° (for initial PET

CA=82°) and CA of PCL from 40° to 114° (for initial PCL CA=75°). The unique benefits of environmental crazing for structural modification are related to the universal character of this approach which can be applied to a broad range of polymers and allows preparation of diverse high-performance materials with tunable hydrophilic-lipophilic balance.

关键词

Keywords

references

Pinem, J.; Wardani, A.; Aryanti, P.; Khoiruddin, K . Hydrophilic modification of polymeric membrane using graft polymerization method: a mini review . IOP Conf. Ser.: Mater. Sci. Eng. , 2019 . 547 012054 DOI: 10.1088/1757-899X/547/1/012054 http://doi.org/10.1088/1757-899X/547/1/012054 .

Dincmen, M.; Hauser, P.; Gursoy, N . Plasma induced graft polymerization of three hydrophilic monomers on nylon 6,6 fabrics for enhancing antistatic property . Plasma Chem. Plasma Process. , 2016 . 36 1377 - 1391 . DOI: 10.1007/s11090-016-9722-5 http://doi.org/10.1007/s11090-016-9722-5 .

Bortoleto, A.; Cruz, N.; Rangel, E.; Durrant, S; Botti, L.; Anjos, С.; Azevedo, S.; Isabel, С.; Teixeira, V.; Medeiros, E.; Soares, N . Surface properties of PET polymer treated by plasma immersion techniques for food packaging . Int. J. Nano Res. , 2018 . 1 33 - 41 . .

Hegemann, D.; Brunner, H.; Oehr, С . Plasma treatment of polymers for surfaceand adhesion improvement . Nuclear Instrum. Meth. Phys. Res. B , 2003 . 208 281 - 286 . DOI: 10.1016/S0168-583X(03)00644-X http://doi.org/10.1016/S0168-583X(03)00644-X .

Zhu, S; Hirt, D . Hydrophilization of polypropylene films by using migratory additives . Vinyl §Addit. Technol. , 2007 . 13 57 - 64 . .

Gillet, G.; Azemar, F.; Faÿ, F.; Réhel, K; Linossier, I . Non-leachable hydrophilic additives for amphiphilic coatings . Polymers , 2018 . 10 445 - 457 . DOI: 10.3390/polym10040445 http://doi.org/10.3390/polym10040445 .

Otitoju, T.; Ahmad, A.; Ooi, B . Recent advances in hydrophilic modification and performance of polyethersulfone (PES) membrane via additive blending . RSC Adv. , 2018 . 8 22710 - 22728 . DOI: 10.1039/C8RA03296C http://doi.org/10.1039/C8RA03296C .

Vincent, J.; Bogatyreva, O.; Bogatyrev, N.; Bowyer, A.; Pahl, A . Biomimetics: its practice and theory . J. R. Soc. Interface , 2006 . 3 471 - 482 . DOI: 10.1098/rsif.2006.0127 http://doi.org/10.1098/rsif.2006.0127 .

Shi, G.; Lu, N.; Xu, H.; Wang, Y.; Shi, S.; Li, H.; Li, Y.; Chi, L . Fabrication of hierarchical structures by unconventional two-step imprinting . J. Colloid Interface Sci. , 2012 . 368 655 - 659 . DOI: 10.1016/j.jcis.2011.11.042 http://doi.org/10.1016/j.jcis.2011.11.042 .

Guo, L . Nanoimprint lithography: methods and material requirements . J. Adv. Mater. , 2007 . 19 495 - 513 . DOI: 10.1002/adma.200600882 http://doi.org/10.1002/adma.200600882 .

Yilbas, B.; Yousaf, M.; Ali, H.; Al-Aqeeli, N . Replication of laser-textured alumina surfaces by polydimethylsiloxane: Improvement of surface hydrophobicity . J. Appl. Polym. Sci. , 2016 . 133 44015 .

Bao, С.; Wang, Z.; Liu, Y.; Zhang, Y.; Nie, H-Y.; Lau, W.; Zhang, Y.; Nie, H. Y.; Lau, W. M.; Mei, J . Mechanics of surface crosslinked poly(dimethyl siloxane) microstructure used for microcontact transfer printing . J. Appl. Polym. Sci. , 2017 . 134 45166 - 45167 . DOI: 10.1002/app.45166 http://doi.org/10.1002/app.45166 .

Acikgoz, C.; Hempenius, M.; Huskens, J.; Vancso, G . Polymers in conventional and alternative lithography for the fabrication of nanostructures . Eur. Phys. J. , 2011 . 47 2033 - 2052 . .

Ravi-Kumar, S.; Lies, B.; Zhang, X.; Lyu, H.; Hantang, Q. Laser ablation of polymers: a review. Polym. Int. 2019, 68, 1391–1401.

Chen, F.; Zhang, D.; Yang, Q.; Yong, J.; Du, G.; Si, J.; Yun, F.; Hou, X . Bioinspired wetting surface via laser microfabrication . ACS Appl. Mater. Interfaces , 2013 . 5 6777 - 6792 . DOI: 10.1021/am401677z http://doi.org/10.1021/am401677z .

Rodriguez-Hernandez, J . Wrinkled interfaces: taking advantage of surface instabilities to pattern polymer surfaces . Prog. Polym. Sci. , 2015 . 42 1 - 41 . DOI: 10.1016/j.progpolymsci.2014.07.008 http://doi.org/10.1016/j.progpolymsci.2014.07.008 .

Wu, H.; Li, X.; Wang, Y.; Wu, J.; Huang, T.; Wang. Y. Fracture behaviors of isotactic polypropylene/poly(ethylene oxide) blends: effect of annealing. Mater. Sci. Eng. A 2011 , 528, 8013– 8020.

Liu, T.; Jiao, С.; Peng, X.; Chen, Y. N.; Chen, Y.; He, C.; Liu, R.; Wang, H . Super-strong and tough poly(vinyl alcohol)/poly(acrylic acid) hydrogels reinforced by hydrogen bonding . J. Mater. Chem. B , 2018 . 6 8105 - 8114 . DOI: 10.1039/C8TB02556H http://doi.org/10.1039/C8TB02556H .

Mucha, M.; Ludwiczak, S.; Kawinska, M . Kinetics of water sorption by chitosan and its blends with poly(vinyl alcohol) . Carbohydr. Polym. , 2005 . 62 42 - 49 . DOI: 10.1016/j.carbpol.2005.07.008 http://doi.org/10.1016/j.carbpol.2005.07.008 .

Liu, S.; Shao, L.; Chua, M.; Lau, С.; Wang, H.; Quan, S . Recent progress in the design of advanced PEO-containing membranes for CO2 removal . Prog. Polym. Sci. , 2013 . 38 1089 - 1120 . DOI: 10.1016/j.progpolymsci.2013.02.002 http://doi.org/10.1016/j.progpolymsci.2013.02.002 .

Jang, J.; Lee, D.K . Oxygen barrier properties of biaxially oriented polypropylene/polyvinyl alcohol blend films . Polymer , 2004 . 45 1599 - 1607 . DOI: 10.1016/j.polymer.2003.12.046 http://doi.org/10.1016/j.polymer.2003.12.046 .

Mehr, N.; Li, X.; Ariganello, M.; Hoemann, C.; Favis, B . Poly( ε -caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends: model bead and cell infiltration behavior . J. Mater. Sci.: Mater. Med. , 2014 . 25 2083 - 2093 . DOI: 10.1007/s10856-014-5256-7 http://doi.org/10.1007/s10856-014-5256-7 .

Tang, X.; Alavi, S. Review . Recent advances in starch, polyvinyl alcohol based polymer blends, nanocomposites and their biodegradability . Carbohydr. Polym. , 2011 . 85 7 - 16 . DOI: 10.1016/j.carbpol.2011.01.030 http://doi.org/10.1016/j.carbpol.2011.01.030 .

Bernal-Ballen, A.; Lopez-Garcia, J. A.; Ozaltin, K . (PVA/chitosan/fucoidan)-ampicillin: a bioartificial polymeric material with combined properties in cell regeneration and potential antibacterial features . Polymers , 2019 . 11 1325 DOI: 10.3390/polym11081325 http://doi.org/10.3390/polym11081325 .

Fuminori, A.; Takeshita, H.; Dobashi, M.; Takenaka, K.; Miya, M.; Shiomi, T . Effects of liquid-liquid phase separation on crystallization of poly(ethylene glycol) in blends with isotactic poly(methyl methacrylate) . Polymer , 2013 . 53 851 - 856 . .

Lisowski, M.; Liu, Q.; Cho, J.; Runt, J . Crystallization behavior of poly(ethylene oxide) and its blends using time-resolved wide- and small-angle X-ray scattering . Macromolecules , 2000 . 33 4842 - 4849 . DOI: 10.1021/ma000207c http://doi.org/10.1021/ma000207c .

Robeson, L . Environmental stress cracking: a review . Polym. Eng. Sci. , 2013 . 53 453 - 467 . DOI: 10.1002/pen.23284 http://doi.org/10.1002/pen.23284 .

Argon, A. The physics of deformation and fracture of polymers . Cambridge University Press, Cambridge, 2013 .

Kramer, E. Microscopic and molecular fundamentals of crazing, in: H.H. Kausch (Ed.), Crazing in Polymers . Springer Berlin Heidelberg, Berlin, Heidelberg. 1983 , 1−56.

Yarysheva, A.; Arzhakova, O.; Yarysheva, L.; Volynskii, A . Biaxial tensile drawing of poly(ethylene terephthalate) via environmental crazing as a method for creating a porous structure . Polymer , 2018 . 158 243 - 253 . DOI: 10.1016/j.polymer.2018.10.071 http://doi.org/10.1016/j.polymer.2018.10.071 .

Yarysheva, A.; Bagrov, D.; Bakirov, A.; Yarysheva, L.; Chvalun, S.; Volynskii, A . Effect of initial polypropylene structure on its deformation via crazing mechanism in a liquid medium . Eur. Polym. J. , 2018 . 100 233 - 240 . DOI: 10.1016/j.eurpolymj.2018.01.040 http://doi.org/10.1016/j.eurpolymj.2018.01.040 .

Yarysheva, A.; Rukhlya E.; Yarysheva, L.; Bagrov, D.; Volynskii, A.; Bakeev, N . The structural evolution of high-density polyethylene during crazing in liquid medium . Eur. Polym. J. , 2015 . 66 458 - 469 . DOI: 10.1016/j.eurpolymj.2015.03.003 http://doi.org/10.1016/j.eurpolymj.2015.03.003 .

Go, D.; Takarada, W.; Aneja, A.; Kikutani, T . Continuous drawing of poly(ethylene terephthalate) in ethanol and agile functionalization through infusion . Mater. Today Commun. , 2019 . 19 98 - 105 . DOI: 10.1016/j.mtcomm.2019.01.001 http://doi.org/10.1016/j.mtcomm.2019.01.001 .

Khanum, R.; Takarada, W.; Aneja, A.; Kikutani, T . Crystallization of poly(ethylene terephthalate) filaments by infusion of ethanol upon cold drawing . Polymer , 2015 . 59 26 - 34 . DOI: 10.1016/j.polymer.2014.12.071 http://doi.org/10.1016/j.polymer.2014.12.071 .

Goel, P.; Möller, M.; Weichold, O . Generation of anisotropic conductivity in polymer films using localized microvoids formed by solvent crazing as nanoreactors . Chem. Mater. , 2009 . 21 3036 - 3038 . DOI: 10.1021/cm900987f http://doi.org/10.1021/cm900987f .

Arzhakova, O.; Kopnov, A.; Nazarov, A.; Dolgova, A.; Volynskii A . “Green” environmental crazing of polymers in oil-in-water emulsions with high water content . Polymer , 2020 . 186 122020 DOI: 10.1016/j.polymer.2019.122020 http://doi.org/10.1016/j.polymer.2019.122020 .

Yarysheva, A.; Streletsov, D.; Malakhov, S.; Arzhakova, O.; Yarysheva, L.; Volynskii, A . Surface modification of poly(tetrafluoroethylene) and poly(ethylene terephthalate) films via environmental crazing . Polym. Int. , 2020 . 69 627 - 634 . DOI: 10.1002/pi.5998 http://doi.org/10.1002/pi.5998 .

Yarysheva, A.; Khavpachev, M.; Bagrov, D.; Bakirov, A.; А . Efimov, E.; Trofimchuk, S.; Chvalun, S. Breathable materials and hybrid nanocomposites with antimicrobial activity based on porous poly( ε -caprolactone) obtained via environmental crazing . Macromol. Mater. Eng. , 2020 . 12 202000636 .

Yarysheva, A.; Bagrov, D.; Bakirov, A.; Tarasevich, B.; Grohovskaya, T.; Yarysheva, L.; Chvalun, S.; Volynskii, A . Polyethylene-poly(ethylene oxide) hybrid films obtained by crazing and their structural peculiarities . Macromolecules , 2017 . 50 2881 - 2888 . DOI: 10.1021/acs.macromol.6b02512 http://doi.org/10.1021/acs.macromol.6b02512 .

Yarysheva, A.; Dolgova, A.; Yarysheva, L.; Arzhakova, O . Hydrophilization of polypropylene films by poly(ethylene oxide) via intercrystallite crazing . Mendeleev Commun. , 2020 . 30 507 - 508 . DOI: 10.1016/j.mencom.2020.07.035 http://doi.org/10.1016/j.mencom.2020.07.035 .

Arzhakova, O.; Dolgova, A.; Yarysheva, A.; Zezin A . Controlled green synthesis of hybrid organo-inorganic nanomaterials based on poly(ethylene terephthalate) and silver nanoparticles by X-ray radiolysis . Express Polym. Lett. , 2021 . 15 531 - 540 . DOI: 10.3144/expresspolymlett.2021.45 http://doi.org/10.3144/expresspolymlett.2021.45 .

Arzhakova, O.; Dolgova, A.; Yarysheva, A.; Nikishin, I.; Volynskii, A . Mechanoresponsive hard elastic materials based on semicrystalline polymers: from preparation to applied properties . ACS Appl. Polym. Mater. , 2020 . 2 2338 - 2349 . DOI: 10.1021/acsapm.0c00288 http://doi.org/10.1021/acsapm.0c00288 .

Soldatov, M.; Sheremet'eva, N.; Kalinina, A.; Demchenko, N.; Serenko, O.; Muzafarov, A . Synthesis of fluorine-containing organosilicon copolymers and their use for the preparation of stable hydrophobic coatings based on the epoxy binder . Russ. Chem. Bull. Int. Ed. , 2014 . 63 267 - 272 . DOI: 10.1007/s11172-014-0422-0 http://doi.org/10.1007/s11172-014-0422-0 .

Dannenfelser, R. M.; Liu, R.; Li, S. Water-Insoluble Drug Formulation , CRC Press, Boca Raton, FL, USA, 2018 .

Vandenburg, H.; Clifford, A.; Bartle, K.; Carlson, R.; Carroll, J.; Newton, I . A simple solvent selection method accelerated solvent extraction of additives from polymers . Analyst , 1999 . 124 1707 - 1710 . DOI: 10.1039/a904631c http://doi.org/10.1039/a904631c .

Volynskii, A.; Bakeev N. Surface Phenomena in the Structural and Mechanical Behaviour of Solid Polymers , Taylor & Francis, Boca Raton, FL, London, and New York, 2015 .

Andrade, E.N.D.C.; Randall, R.F.Y . The Rehbinder effect . Nature , 1949 . 164 1127 .

Kramer, E. Environmental Cracking of Polymers, in Developments in Polymer Fracture , Ed. E. H. Andrews. Applied Science, London, 1979 , 55.

Cassie, A., Baxter, S . Large contact angles of plant and animal surfaces . Nature , 1945 . 155 21 - 22 . DOI: 10.1038/155021a0 http://doi.org/10.1038/155021a0 .

http://www.lotus-salvinia.de/index.php/en/lotus-effect (07.02.2022)

Yarysheva, A.; Bagrov, D.; Kechek'yan, P.; Rukhlya, E.; Bakirov, A.; Yarysheva, L.; Chvalun, S.; Volynskii, A . Which way do fibrils disappear . Polymer , 2019 . 169 234 - 242 . DOI: 10.1016/j.polymer.2019.02.066 http://doi.org/10.1016/j.polymer.2019.02.066 .

Wang, S.; Jiang, L . Definition of superhydrophobic states . Adv. Mater. , 2007 . 19 3423 - 3424 . DOI: 10.1002/adma.200700934 http://doi.org/10.1002/adma.200700934 .

Yan, L.; Yang, X.; Zhang, Y.; Wu, Y.; Cheng, Z.; Darling, S.; Shao, L . Porous Janus materials with unique asymmetries and functionality . Mater. Today , 2021 . 51 626 DOI: 10.1016/j.mattod.2021.07.001 http://doi.org/10.1016/j.mattod.2021.07.001 .

浏览量

120

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Lignin-derived High-performance Near-infrared Light-responsive Shape Memory Polyurethanes for Biomedical Applications

Tunable Thermo-Responsive Shape Memory Materials Enabled by Poly(ε-caprolactone)-Poly((2-vinyl)ethylene glycol) Copolymers via Facile Thiol-Ene Photo-Crosslink

Bioinspired Double-stranded Yarn with Alternating Hydrophobic/Hydrophilic Patterns for High-efficiency Fog Collection

Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements

Circularly Polarized Luminescence Based on Helical Polymers: Structure-Property Relationships and Regulation Mechanisms

Controlled Wettability of Polymers via Environmental Crazing

Controlled Wettability of Polymers via Environmental Crazing

DOI：10.1007/s10118-022-2765-6

摘要

Abstract

关键词

Keywords

references