The Influence of Peroxide on Bubble Stability and Rheological Properties of Biobased Poly(lactic acid)/Natural Rubber Blown Films

Peerapong Chanthot; Noppadon Kerddonfag; Cattaleeya Pattamaprom

doi:10.1007/s10118-022-2653-0

Your Location：

Home >

Browse articles >

The Influence of Peroxide on Bubble Stability and Rheological Properties of Biobased Poly(lactic acid)/Natural Rubber Blown Films

Papers | Updated：2022-01-01

- The Influence of Peroxide on Bubble Stability and Rheological Properties of Biobased Poly(lactic acid)/Natural Rubber Blown Films
- The Influence of Peroxide on Bubble Stability and Rheological Properties of Biobased Poly(lactic acid)/Natural Rubber Blown Films
- Chinese Journal of Polymer Science 2022年40卷第2期页码：197-207
- Affiliations：
  
  a.Research Unit in Polymer Rheology and Processing, Department of Chemical Engineering, Faculty of Engineering, Thammasat University, Pathum Thani 12120, Thailand
  b.National Metal and Materials Technology Center, National Science and Technology Development Agency, Thailand Science Park, Pathum Thani 12120, Thailand
- Author bio：
  
  cattalee@engr.tu.ac.th
- Funds：
  
  This work was financially supported by the Thailand Science Research and Innovation (TSRI) through the Royal Golden Jubilee Ph.D. Program Scholarship (No. PHD/0058/2557) and through the research funding from the National Research Council and TSRI (No. RDG62T0029). The additional financial support from the research unit in polymer rheology and processing, Thammasat University, is also gratefully acknowledged.
- DOI：10.1007/s10118-022-2653-0
  中图分类号：
- 收稿：2021-07-15，
  
  修回：2021-10-13，
  
  录用：2021-10-14，
  
  网络首发：2022-01-01，
  
  纸质出版：2022-02-01
- Accepted：
Scan QR Code
Chanthot, P.; Kerddonfag, N.; Pattamaprom, C. The influence of peroxide on bubble stability and rheological properties of biobased poly(lactic acid)/natural rubber blown films. Chinese J. Polym. Sci. 2022, 40, 197–207

Peerapong Chanthot, Noppadon Kerddonfag, Cattaleeya Pattamaprom. The Influence of Peroxide on Bubble Stability and Rheological Properties of Biobased Poly(lactic acid)/Natural Rubber Blown Films[J]. Chinese Journal of Polymer Science, 2022, 40(2): 197-207.
Chanthot, P.; Kerddonfag, N.; Pattamaprom, C. The influence of peroxide on bubble stability and rheological properties of biobased poly(lactic acid)/natural rubber blown films. Chinese J. Polym. Sci. 2022, 40, 197–207 DOI： 10.1007/s10118-022-2653-0.

Peerapong Chanthot, Noppadon Kerddonfag, Cattaleeya Pattamaprom. The Influence of Peroxide on Bubble Stability and Rheological Properties of Biobased Poly(lactic acid)/Natural Rubber Blown Films[J]. Chinese Journal of Polymer Science, 2022, 40(2): 197-207. DOI： 10.1007/s10118-022-2653-0.

摘要

Abstract

This study investigated the effects of natural rubber (NR) and an organic peroxide on the rheological properties

mechanical properties

morphology

and bubble stability during film blowing of poly(lactic acid) (PLA). The NR and peroxide contents were varied from 0 wt% to 25 wt% and 0 wt% to 0.5 wt%

respectively. The results confirmed that the presence of well-dispersed NR could significantly improve the toughness

elongation at break

and processability of PLA films

where the optimal amount of NR was 15 wt%. For the reactive blending with peroxide

a suitable peroxide content for good film toughness and clarity was 0.03 wt%

while the higher content of 0.1 wt% could provide slightly higher processability. These contents are considered much lower than that in the PLA system (without NR)

which required up to 0.5 wt% peroxide. The rheological studies indicated that the melt strength

the storage modulus (

) and complex viscosity (

) at low frequency could be correlated with good film blowing processability of the PLA/NR films at low gel contents. These parameters failed to correlate in the films having high gel contents as the deformation rate experienced by each test was different leading to the different levels of response to the type and amount of gels.

关键词

Keywords

references

Mallet, B.; Lamnawar, K.; Maazouz, A . Improvement of blown film extrusion of poly(lactic acid): structure–processing–properties relationships . Polym. Eng. Sci. , 2014 . 54 840 - 857 . DOI: 10.1002/pen.23610 http://doi.org/10.1002/pen.23610 .

Karkhanis, S. S.; Stark, N. M.; Sabo, R. C.; Matuana, L. M. Blown film extrusion of poly(lactic acid) without melt strength enhancers. J. Appl. Polym. Sci. 2017 , 134 , 45212.

Al-Itry, R.; Lamnawar, K.; Maazouz, A . Biopolymer blends based on poly(lactic acid): shear and elongation rheology/structure/blowing process relationships . Polymers , 2015 . 7 939 - 962 . DOI: 10.3390/polym7050939 http://doi.org/10.3390/polym7050939 .

Ding, Y.; Lu, B.; Wang, P.; Wang, G.; Ji, J . PLA-PBAT-PLA tri-block copolymers: effective compatibilizers for promotion of the mechanical and rheological properties of PLA/PBAT blends . Polym. Degrad. Stabil. , 2018 . 147 41 - 48 . DOI: 10.1016/j.polymdegradstab.2017.11.012 http://doi.org/10.1016/j.polymdegradstab.2017.11.012 .

Wu, N.; Zhang, H . Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends . Mater. Lett. , 2017 . 192 17 - 20 . DOI: 10.1016/j.matlet.2017.01.063 http://doi.org/10.1016/j.matlet.2017.01.063 .

Nofar, M.; Salehiyan, R.; Ciftci, U.; Jalali, A.; Durmuş, A . A. Ductility improvements of PLA-based binary and ternary blends with controlled morphology using PBAT, PBSA, and nanoclay . Compos. B. Eng. , 2020 . 182 107661 DOI: 10.1016/j.compositesb.2019.107661 http://doi.org/10.1016/j.compositesb.2019.107661 .

Nyambo, C.; Misra, M.; Mohanty, A. K . Toughening of brittle poly(lactide) with hyperbranched poly(ester-amide) and isocyanate-terminated prepolymer of polybutadiene . J. Mater. Sci. , 2012 . 47 5158 - 5168 . DOI: 10.1007/s10853-012-6393-3 http://doi.org/10.1007/s10853-012-6393-3 .

Suparanon, T.; Surisaeng, J.; Phusunti, N.; Phetwarotai, W . Synergistic efficiency of tricresyl phosphate and montmorillonite on the mechanical characteristics and flame retardant properties of polylactide and poly(butylene succinate) blends . Chinese J. Polym. Sci. , 2018 . 36 620 - 631 . DOI: 10.1007/s10118-018-2043-9 http://doi.org/10.1007/s10118-018-2043-9 .

Gu, X.; Hu, L.; Fu, Z.; Wang, H.; Li, Y . Reactive TiO 2 nanoparticles compatibilized PLLA/PBSU blends: fully biodegradable polymer composites with improved physical, antibacterial and degradable properties . Chinese J. Polym. Sci. , 2021 . 39 1645 - 1656 . DOI: 10.1007/s10118-021-2632-x http://doi.org/10.1007/s10118-021-2632-x .

Zhang, W.; Yu, Z.; Yanmo, C . Modified brittle poly(lactic acid) by biodegradable hyper branch poly(ester amide) . Iran. Polym. J. , 2008 . 12 891 - 898 . .

Huang, J.; Mou, W.; Wang, W.; Lv, F.; Chen, Y . Influence of DCP content on the toughness and morphology of fully biobased ternary PLA/NR-PMMA/NR TPVs with co-continuous phase structure . Polym-Plast. Tech. Mat. , 2020 . 59 674 - 684 . .

Sathornluck, S.; Choochottiros, C. Modification of epoxidized natural rubber as a PLA toughening agent. J. Appl. Polym. Sci. 2019 , 48267

Triampanichkul, N.; Boochathum, P . Hydroxylated natural rubber effect on crystallinity and mechanical properties of PLA . Key Eng. Mater. , 2019 . 798 310 - 315 . DOI: 10.4028/www.scientific.net/KEM.798.310 http://doi.org/10.4028/www.scientific.net/KEM.798.310 .

Phattarateera, S.; Pattamaprom, C. The viscosity effect of masticated natural vs. synthetic isoprene rubber on toughening of polylactic acid. Int. J. Polym. Sci. 2019 , 5679871

Phattarateera, S.; Pattamaprom, C . Comparative performance of functional rubbers on toughness and thermal property improvement of polylactic acid . Mater. Today Commun. , 2019 . 19 374 - 382 . DOI: 10.1016/j.mtcomm.2019.02.012 http://doi.org/10.1016/j.mtcomm.2019.02.012 .

Pattamaprom, C.; Chareonsalung, W.; Teerawattananon, C.; Ausopron, S.; Prachayawasin, P.; Van Puyvelde, P . Improvement in impact resistance of polylactic acid by masticated and compatibilized natural rubber . Iran. Polym. J. , 2016 . 25 169 - 178 . DOI: 10.1007/s13726-015-0411-7 http://doi.org/10.1007/s13726-015-0411-7 .

Jaratrotkamjorn, R.; Khaokong, C.; Tanrattanakul, V . Toughness enhancement of poly(lactic acid) by melt blending with natural rubber . J. Appl. Polym. Sci. , 2012 . 124 5027 - 5036 . .

Pongtanayut, K.; Thongpin, C.; Santawitee, O . The effect of rubber on morphology, thermal properties and mechanical properties of PLA/NR and PLA/ENR blends . Energy Proc. , 2013 . 34 888 - 897 . DOI: 10.1016/j.egypro.2013.06.826 http://doi.org/10.1016/j.egypro.2013.06.826 .

Xia, S.; Liu, X.; Wang, J.; Kan, Z.; Chen, H.; Fu, W.; Li, Z . Role of poly(ethylene glycol) grafted silica nanoparticle shape in toughened PLA-matrix nanocomposites . Compos. B Eng. , 2019 . 168 398 - 405 . DOI: 10.1016/j.compositesb.2019.03.050 http://doi.org/10.1016/j.compositesb.2019.03.050 .

Zhang, C.; Wang, L.; Zhai, T.; Wang, X.; Dan, Y.; Turng, L. S . The surface grafting of graphene oxide with poly (ethylene glycol) as a reinforcement for poly(lactic acid) nanocomposite scaffolds for potential tissue engineering applications . J. Mech. Behav. Biomed. Mater. , 2016 . 53 403 - 413 . DOI: 10.1016/j.jmbbm.2015.08.043 http://doi.org/10.1016/j.jmbbm.2015.08.043 .

Behera, K.; Chang, Y. H.; Yadav, M.; Chiu, F. C . Enhanced thermal stability, toughness, and electrical conductivity of carbon nanotube-reinforced biodegradable poly(lactic acid)/poly(ethylene oxide) blend-based nanocomposites . Polymer , 2020 . 189 122002 DOI: 10.1016/j.polymer.2019.122002 http://doi.org/10.1016/j.polymer.2019.122002 .

Mohapatra, A. K.; Mohanty, S.; Nayak, S. K . Properties and characterization of biodegradable poly(lactic acid) (PLA)/poly(ethylene glycol) (PEG) and PLA/PEG/organoclay: a study of crystallization kinetics, rheology, and compostability . J. Thermoplast. Compos. Mater. , 2016 . 29 443 - 463 . DOI: 10.1177/0892705713518812 http://doi.org/10.1177/0892705713518812 .

Maiza, M.; Benaniba, M . T.; Massardier-Nageotte, V. Plasticizing effects of citrate esters on properties of poly(lactic acid) . J. Polym. Eng. , 2016 . 36 371 - 380 . DOI: 10.1515/polyeng-2015-0140 http://doi.org/10.1515/polyeng-2015-0140 .

Rapa, M.; Darie-Nita, R. N.; Vasile, C . Influence of plasticizers over some physico-chemical properties of PLA . Mater. Plast. , 2017 . 54 73 - 78 . DOI: 10.37358/MP.17.1.4789 http://doi.org/10.37358/MP.17.1.4789 .

Zhao, X.; Hu, H.; Wang, X.; Yu, X.; Zhou, W.; Peng, S . Super tough poly(lactic acid) blends: a comprehensive review . RSC Adv. , 2020 . 10 13316 - 13368 . DOI: 10.1039/D0RA01801E http://doi.org/10.1039/D0RA01801E .

Huang, Y.; Zhang, C.; Pan, Y.; Wang, W.; Jiang, L.; Dan, Y . Study on the effect of dicumyl peroxide on structure and properties of poly(lactic acid)/natural rubber blend . J. Polym. Environ. , 2013 . 21 375 - 387 . DOI: 10.1007/s10924-012-0544-0 http://doi.org/10.1007/s10924-012-0544-0 .

Phetphaisit, C. W.; Wapanyakul, W.; Phinyocheep, P . Effect of modified rubber powder on the morphology and thermal and mechanical properties of blown poly(lactic acid)-hydroxyl epoxidized natural rubber films for flexible film packaging . J. Appl. Polym. Sci. , 2019 . 47503 DOI: 10.1002/app.47503 http://doi.org/10.1002/app.47503 .

Dean, K . M.; Petinakis, E.; Meure, S.; Yu, L.; Chryss, A. Melt strength and rheological properties of biodegradable poly(lactic acid) modified via alkyl radical-based reactive extrusion processes . J. Polym. Environ. , 2012 . 20 741 - 747 . DOI: 10.1007/s10924-012-0461-2 http://doi.org/10.1007/s10924-012-0461-2 .

Chanthot, P.; Kaeophimmueang, N.; Larpsuriyakul, P.; Pattamaprom, C . The effect of dynamic vulcanization systems on the mechanical properties and phase morphology of PLA/NR reactive blends . J. Polym. Res. , 2021 . 28 1 - 12 . .

Si, W. J.; Yuan, W. Q.; Li, Y. D.; Chen, Y. K.; Zeng, J. B . Tailoring toughness of fully biobased poly(lactic acid)/natural rubber blends through dynamic vulcanization . Polym. Test. , 2018 . 65 249 - 255 . DOI: 10.1016/j.polymertesting.2017.11.030 http://doi.org/10.1016/j.polymertesting.2017.11.030 .

Deetuam, C.; Samthong, C.; Pratumpol, P.; Somwangthanaroj, A . Improvements in morphology, mechanical and thermal properties of films produced by reactive blending of poly(lactic acid)/natural rubber latex with dicumyl peroxide . Iran. Polym. J. , 2017 . 26 615 - 628 . DOI: 10.1007/s13726-017-0547-8 http://doi.org/10.1007/s13726-017-0547-8 .

Sirisinha, K.; Somboon, W . Melt characteristics, mechanical, and thermal properties of blown film from modified blends of poly (butylene adipate- co -terephthalate) and polylactide . J. Appl. Polym. Sci. , 2012 . 124 4986 - 4992 . .

Rytlewski, P.; Żenkiewicz, M.; Malinowski, R . Influence of dicumyl peroxide content on thermal and mechanical properties of polylactide . Int. Polym. Process. , 2011 . 26 580 - 586 . DOI: 10.3139/217.2521 http://doi.org/10.3139/217.2521 .

Yamoum, C.; Maia, J.; Magaraphan, R . Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates . Polym. Adv. Technol. , 2017 . 28 102 - 112 . DOI: 10.1002/pat.3864 http://doi.org/10.1002/pat.3864 .

Yuan, D.; Chen, K.; Xu, C.; Chen, Z.; Chen, Y . Crosslinked bicontinuous biobased PLA/NR blends via dynamic vulcanization using different curing systems . Carbohydr. Polym. , 2014 . 113 438 - 445 . DOI: 10.1016/j.carbpol.2014.07.044 http://doi.org/10.1016/j.carbpol.2014.07.044 .

Sampath, W. D. M.; Egodage, S. M.; Edirisinghe, D. G . Effect of peroxide loading on properties of natural rubber and low-density polyethylene composites . J. Phys. Sci. , 2019 . 30 49 - 69 . DOI: 10.21315/jps2019.30.3.4 http://doi.org/10.21315/jps2019.30.3.4 .

Kruželák, J.; Sýkora, R.; Hudec, I . Peroxide vulcanization of natural rubber. Part I: effect of temperature and peroxide concentration . J. Polym. Eng. , 2014 . 34 617 - 624 . DOI: 10.1515/polyeng-2014-0034 http://doi.org/10.1515/polyeng-2014-0034 .

Rajan, R.; Varghese, S.; George, K. E . Kinetics of peroxide vulcanization of natural rubber . Prog. Rubber Plast. Recycl. Technol. , 2012 . 28 201 - 220 . DOI: 10.1177/147776061202800405 http://doi.org/10.1177/147776061202800405 .

Hagen, R.; Salmén, L.; Stenberg, B . Effects of the type of crosslink on viscoelastic properties of natural rubber . J. Polym. Sci., Part B: Polym. Phys. , 1996 . 34 1997 - 2006 . DOI: 10.1002/(SICI)1099-0488(19960915)34:12<1997::AID-POLB5>3.0.CO;2-N http://doi.org/10.1002/(SICI)1099-0488(19960915)34:12<1997::AID-POLB5>3.0.CO;2-N .

Chantamunee, T.; Pattamaprom, C . Synthesis of PLA- g -NR by peroxide-induced melt-grafting as a biobased impact modifier for poly(lactic acid) . TJST. , 2020 . 28 1889 - 1902 . .

Yuan, D.; Xu, C.; Chen, Z.; Chen, Y . Crosslinked bicontinuous biobased polylactide/natural rubber materials: super toughness, “net-like”-structure of NR phase and excellent interfacial adhesion . Polym. Test. , 2014 . 38 73 - 80 . DOI: 10.1016/j.polymertesting.2014.07.004 http://doi.org/10.1016/j.polymertesting.2014.07.004 .

浏览量

186

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Enhanced Segment Mobility Promotes Stereocomplex Crystallization in Polymer Blends via Elevated Segmental Miscibility

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

Influence of Antioxidants and Deep Eutectic Solvent on Vulcanization Kinetics and Mechanical Behaviors of Natural Rubber/Styrene-Butadiene Rubber Blend and Composites

A Phosphorus/Nitrogen-containing Phosphaphenanthrene Derivative as Flame Retardant for Poly(lactic acid)

On-demand Peelable UV-curable Adhesives with Superior Bonding Strength: Rational Molecular Engineering of Cohesion-adhesion Synergy