Phenylethynyl-terminated Imide Oligomers Modified by Reactive Diluent for Resin Transfer Molding Application

Wei-Jie Hong; Li-Li Yuan; Hao-Yang Zhang; Chao Cui; Wei Chen; Shi-Yong Yang

doi:10.1007/s10118-021-2636-6

Your Location：

Home >

Browse articles >

Phenylethynyl-terminated Imide Oligomers Modified by Reactive Diluent for Resin Transfer Molding Application

Papers | Updated：2021-11-09

- Phenylethynyl-terminated Imide Oligomers Modified by Reactive Diluent for Resin Transfer Molding Application
- Phenylethynyl-terminated Imide Oligomers Modified by Reactive Diluent for Resin Transfer Molding Application
- Chinese Journal of Polymer Science 2022年40卷第1期页码：107-120
- Affiliations：
  
  a.Key Laboratory of Science and Technology on High-tech Polymer Materials, Chinese Academy of Sciences, Beijing 100190, China
  b.School of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
  c.Astronautical Systems Engineering Technology, Beijing 100076, China
  d.Aerospace Research Institute of Materials & Processing Technology, Beijing 100076, China
- Author bio：
  
  yuanlili@iccas.ac.cn (L.L.Y.)
  shiyang@iccas.ac.cn (S.Y.Y.)
- Funds：
  
  This work was financially supported by the National Natural Science Foundation of China (No. 51803222) and Science and Technology Service Network Initiative, Chinese Academy of Sciences.
- DOI：10.1007/s10118-021-2636-6
  中图分类号：
- 收稿：2021-04-20，
  
  修回：2021-7-24，
  
  录用：2021-8-10，
  
  网络首发：2021-11-09，
  
  纸质出版：2022-01-01
- Accepted：
Scan QR Code
Hong, W. J.; Yuan, L. L.; Zhang, H. Y.; Cui, C.; Chen, W.; Yang, S. Y. Phenylethynyl-terminated imide oligomers modified by reactive diluent for resin transfer molding application. Chinese J. Polym. Sci. 2022, 40, 107–120

Wei-Jie Hong, Li-Li Yuan, Hao-Yang Zhang, et al. Phenylethynyl-terminated Imide Oligomers Modified by Reactive Diluent for Resin Transfer Molding Application[J]. Chinese Journal of Polymer Science, 2022, 40(1): 107-120.
Hong, W. J.; Yuan, L. L.; Zhang, H. Y.; Cui, C.; Chen, W.; Yang, S. Y. Phenylethynyl-terminated imide oligomers modified by reactive diluent for resin transfer molding application. Chinese J. Polym. Sci. 2022, 40, 107–120 DOI： 10.1007/s10118-021-2636-6.

Wei-Jie Hong, Li-Li Yuan, Hao-Yang Zhang, et al. Phenylethynyl-terminated Imide Oligomers Modified by Reactive Diluent for Resin Transfer Molding Application[J]. Chinese Journal of Polymer Science, 2022, 40(1): 107-120. DOI： 10.1007/s10118-021-2636-6.

摘要

Abstract

To meet the processing requirements of resin transfer moulding (RTM) technology

reactive diluent containing

-phenylene moiety was synthesized to physically mixed with phenylethynyl terminated cooligoimides with well-designed molecular weights of 1500−2500 g/mol derived from 4

4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)

4'-oxydianiline (3

4'-ODA) and

-phenylenediamine (

-PDA). This blend shows low minimum melting viscosity (

1 Pa·s) and enlarged processing temperature window (260–361 °C). FPI-R-1 stays below 1 Pa·s for 2 h at 270 °C. The relationship between the molecular weight of the blend and its melting stability was first explored. Blending oligoimides with lower molecular weights exhibit better melting stability. Upon curing at 380 °C for 2 h

the thermosetting polyimide resin demonstrates superior heat resistance (

=420−426 °C).

关键词

Keywords

references

Smith, J. G.; Connell, J. W.; Hergenrother, P. M . The effect of phenylethynyl terminated imide oligomer molecular weight on the properties of composites . J. Compos Mater. , 2000 . 34 614 - 628 . DOI: 10.1177/002199830003400705 http://doi.org/10.1177/002199830003400705 .

Mangalgiri, P. D . Polymer-matrix composites for high-temperature applications . Def. Sci. J. , 2005 . 55 175 - 193 . DOI: 10.14429/dsj.55.1980 http://doi.org/10.14429/dsj.55.1980 .

Connell, J. W.; Smith, J. G.; Hergenrother, P. M . oligomers and polymers containing phenylethynyl groups . J. Macromol. Sci. : Polym. Rev. , 2000 . 40 207 - 230 . DOI: 10.1081/MC-100100585 http://doi.org/10.1081/MC-100100585 .

Chuang, K. C.; Bowles, K. J.; Papadopoulos, D.; Hardy-Green, D.; McCorkle, L . A high T g PMR polyimide composites (DMBZ-15) . J. Adv. Mater. , 2001 . 33 33 - 38 . .

Serafini, T. T. Delvigs, P.; Lightsey, G. R . Thermally stable polyimides from solutions of monomeric reactants . J. Appl. Polym. Sci. , 1972 . 16 905 - 915 . DOI: 10.1002/app.1972.070160409 http://doi.org/10.1002/app.1972.070160409 .

Vannucci, R. D.; Cifani, D. The 700 F Properties of Autoclave Cured PMR-2, NASA-TM-100923 1988 .

Wang, Z. H.; Fang, G. Q.; He, J. J.; Yang, H. X.; Yang, S. Y . Semi-aromatic thermosetting polyimide resins containing alicyclic units for achieving low melt viscosity and low dielectric constant . React. Funct. Polym. , 2020 . 146 104411 DOI: 10.1016/j.reactfunctpolym.2019.104411 http://doi.org/10.1016/j.reactfunctpolym.2019.104411 .

Cho, D.; Drzal, L. T . Phenylethynyl-terminated polyimide, exfoliated graphite nanoplatelets, and the composites: an overview . Carbon Lett. , 2016 . 19 1 - 11 . DOI: 10.5714/CL.2016.19.001 http://doi.org/10.5714/CL.2016.19.001 .

Liaw, D. J.; Wang, K. L.; Huang, Y. C.; Lee, K. R.; Lai, J. Y.; Ha, C. S . Advanced polyimide materials: syntheses, physical properties and applications . Prog. Polym. Sci. , 2012 . 37 907 - 974 . DOI: 10.1016/j.progpolymsci.2012.02.005 http://doi.org/10.1016/j.progpolymsci.2012.02.005 .

Yu, P.; Wang, Y.; Yu, J. R.; Zhu, J.; Hu, Z. M . Synthesis and characterization of phenylethynyl-terminated polyimide oligomers derived from 2,3,3′,4′-diphenyl ether tetracarboxylic acid dianhydride and 3,4′-oxydianiline . Chinese J. Polym. Sci. , 2016 . 34 122 - 134 . DOI: 10.1007/s10118-016-1733-4 http://doi.org/10.1007/s10118-016-1733-4 .

Simone, C. D.; Scola, D. A . Modification of PETI-5K imide oligomers: effect on viscosity . High Perform. Polym. , 2003 . 15 473 - 501 . DOI: 10.1177/09540083030154006 http://doi.org/10.1177/09540083030154006 .

Cho, D.; Drzal, L. T . Characterization, properties, and processing of LaRC PETI-5 as a high-temperature sizing material. II. Thermal characterization . J. Appl. Polym. Sci. , 2000 . 75 1278 - 1287 . DOI: 10.1002/(SICI)1097-4628(20000307)75:10<1278::AID-APP9>3.0.CO;2-M http://doi.org/10.1002/(SICI)1097-4628(20000307)75:10<1278::AID-APP9>3.0.CO;2-M .

Ogasawara, T.; Ishida, Y.; Yokota, R.; Watanabe, T.; Aoi, T.; Goto, J . Processing and properties of carbon fiber/triple-A polyimide composites fabricated from imide oligomer dry prepreg . Compos. Pt. A-Appl. Sci. Manuf. , 2007 . 38 1296 - 1303 . DOI: 10.1016/j.compositesa.2006.11.007 http://doi.org/10.1016/j.compositesa.2006.11.007 .

Yokota, R.; Yamamoto, S.; Yano, S.; Sawaguchi, T.; Hasegawa, M.; Yamaguchi, H.; Ozawa, H.; Sato, R . Molecular design of heat resistant polyimides having excellent processability and high glass transition temperature . High Perform. Polym. , 2016 . 13 S61 - S72 . .

Ogasawara, T.; Ishikawa, T.; Yokota, R.; Ozawa, H.; Taguchi, M.; Sato, R.; Shigenari, Y.; Miyagawa, K . Processing and properties of carbon fiber reinforced triple-A polyimide (Tri-A PI) matrix composites . Adv. Compos. Mater. , 2002 . 11 277 - 286 . DOI: 10.1163/156855102762506317 http://doi.org/10.1163/156855102762506317 .

Cho, D.; Drzal, L. T . Characterization, properties, and processing of LaRC™ PETI-5 as a high-temperature sizing material. I. FTIR studies on imidization and phenylethynyl end-group reaction behavior . J. Appl. Polym. Sci. , 2000 . 76 190 - 200 . DOI: 10.1002/(SICI)1097-4628(20000411)76:2<190::AID-APP8>3.0.CO;2-8 http://doi.org/10.1002/(SICI)1097-4628(20000411)76:2<190::AID-APP8>3.0.CO;2-8 .

Fang, X.; Rogers, D. F.; Scola, D. A.; Stevens, M. P . A study of the thermal cure of a phenylethynyl-terminated imide model compound and a phenylethynyl-terminated imide oligomer (PETI-5) . J. Polym. Sci., Part A: Polym. Chem. , 1998 . 36 461 - 470 . DOI: 10.1002/(SICI)1099-0518(199802)36:3<461::AID-POLA10>3.0.CO;2-L http://doi.org/10.1002/(SICI)1099-0518(199802)36:3<461::AID-POLA10>3.0.CO;2-L .

Li, Y.; Morgan, R. J . Thermal cure of phenylethynyl-terminated AFR-PEPA-4 imide oligomer and a model compound . J. Appl. Polym. Sci. , 2006 . 101 4446 - 4453 . DOI: 10.1002/app.24047 http://doi.org/10.1002/app.24047 .

Fang, X.; Xie, X. Q.; Simone, C. D.; Stevens, M. P.; Scola, D. A . A solid-state 13 C NMR study of the cure of 13 C-labeled phenylethynyl end-capped polyimides . Macromolecules. , 2000 . 33 1671 - 1681 . DOI: 10.1021/ma991197m http://doi.org/10.1021/ma991197m .

Zhang, Y.; Jain, A.; Grunenfelder, L. K.; Miyauchi, M.; Nutt, S . Process development for phenylethynyl-terminated PMDA-type asymmetric polyimide composites . High Perform. Polym. , 2017 . 30 731 - 741 . .

Cho, D.; Choi, Y.; Drzal, L. T . Simultaneous monitoring of the imidization and cure reactions of LaRC PETI-5 sized on a braided glass fabric substrate by dynamic mechanical analysis . Polymer , 2001 . 42 4611 - 4618 . DOI: 10.1016/S0032-3861(00)00863-6 http://doi.org/10.1016/S0032-3861(00)00863-6 .

Hong, W.; Yuan, L.; Ma, Y.; Cui, C.; Zhang, H.; Yang, S. Y.; Sun, W. H . Resin transfer moldable fluorinated phenylethynyl-terminated imide oligomers with high T g : structure-melt stability relationship . Polymers , 2021 . 13 903 - 925 . DOI: 10.3390/polym13060903 http://doi.org/10.3390/polym13060903 .

Su, C. N.; Ji, M.; Fan, L.; Yang, S. Y . Phenyl-endcapped oligoimides with low melt viscosities and high T g s: effects of the molecular weights . High Perform. Polym. , 2011 . 23 352 - 361 . DOI: 10.1177/0954008311410997 http://doi.org/10.1177/0954008311410997 .

Fu, X.; Zhang, C.; Liang, R.; Wang, B.; Fielding, J. C . High temperature vacuum assisted resin transfer molding of phenylethynyl terminated imide composites . Polym. Compos. , 2010 . 32 52 - 58 . .

Kejian, W.; Ogasawara, T.; Ishida, Y . Optimization of liquid molding cycle for a phenylethynyl terminated polyimide composite . J. Reinf. Plast. Compos. , 2005 . 25 361 - 377 . .

Smith, J. J. G.; Connell, J. W.; Hergenrother, P. M.; Criss, J. M . Resin teansfer moldable phenylethynyl containing imide oligomers . J. Compos. Mater. , 2002 . 36 2255 - 2265 . DOI: 10.1177/0021998302036019293 http://doi.org/10.1177/0021998302036019293 .

Connell, J. W.; Smith, J. G.; Hergenrother, Jr., P. M.; Criss, J. M. High temperature transfer molding resins: status of PETI-298 and PETI-330. NASA Langley Research Center; Hampton, VA, United States, 2003 .

Smith, J. G.; Connell, J. W.; Hergenrother, P. M.; Ford, L. A.; Criss, J. M . Transfer molding imide resins based on 2,3,3′,4′-biphenyltetracarboxylic dianhydride . Macromol. Symp. , 2003 . 199 401 - 418 . DOI: 10.1002/masy.200350934 http://doi.org/10.1002/masy.200350934 .

Connell, J. W.; Smith, J. G.; Hergenrother, Jr. P. M.; Criss, J. M.; High temperature transfer molding resins: preliminary composite properties of PETI-375. NASA Langley Research Center, Hampton, VA, United States, 2004 .

Meng, X.; Zheng, Y.; Yan, J.; Li, Y.; Wang, Z.; Li, G . 2, 3, 3′, 4′-Oxydiphthalic dianhydride-based phenylethynyl-terminated imide oligomers for low-temperature resin transfer molding applications . High Perform. Polym. , 2016 . 28 962 - 970 . DOI: 10.1177/0954008315611470 http://doi.org/10.1177/0954008315611470 .

Chuang, K. C.; Criss, J. M.; Mintz, E. A. Polyimides based on asymmetric dianhydrides (ii) (a-BPDA vs a-BTDA) for resin transfer molding (RTM). NASA Glenn Research Center; Cleveland, OH, United States Air Force Office of Scientific Research, Bolling AFB; Washington, DC, United States 2010 .

Miyauchi, M.; Ishida, Y.; Ogasawara, T.; Yokota, R . Novel phenylethynyl-terminated PMDA-type polyimides based on KAPTON backbone structures derived from 2-phenyl-4,4′-diaminodiphenyl ether . Polym. J. , 2012 . 44 959 - 965 . DOI: 10.1038/pj.2012.19 http://doi.org/10.1038/pj.2012.19 .

Wang, W.; Chen, G.; Fang, X . 1,4-Bis(2,3-dicarboxyl-phenoxy)benzene dianhydride-based phenylethynyl terminated thermoset oligoimides for resin transfer molding applications . J. Appl. Polym. Sci. , 2019 . 136 47967 DOI: 10.1002/app.47967 http://doi.org/10.1002/app.47967 .

Connell, J. W.; Smith, J. G.; Hergenrother, P. M.; Rommel, M. L . Neat resin, adhesive and composite properties of reactive additive/PETI-5 Blends . High Perform. Polym. , 2000 . 12 323 - 333 . DOI: 10.1088/0954-0083/12/2/307 http://doi.org/10.1088/0954-0083/12/2/307 .

Liu, H. B.; Simone, C. D.; Scola, D. A . Synthesis and characterization of phenylethynyl-end-capped cooligomides from fluorinated dianhydrides 4,4'-(hexafluoroisopropylidene)dipthalic anhydride and 4,4'-(2,2,2-trifluoro-1-phenylethylidene)dipthalic anhydride and para - and meta -phenylene diamines and cooligomide blends with phenylethynyl-end-capped reactive diluents . J. Polym. Sci., Part A: Polym. Chem. , 2003 . 41 2630 - 2649 . DOI: 10.1002/pola.10799 http://doi.org/10.1002/pola.10799 .

Liu, H.; Simone, C. D.; Katiyar, P. S.; Scola, D. A . Adhesive properties of low-viscosity phenylethynyl (PE) end-capped co-oligomides and co-oligomide blends . Int. J. Adhes. Adhes. , 2005 . 25 219 - 226 . DOI: 10.1016/j.ijadhadh.2004.07.004 http://doi.org/10.1016/j.ijadhadh.2004.07.004 .

Rao, X.; Dang, G.; Zhou, H.; Yang, W.; Cui, G.; Chen, C.; Yokota, R . Design and synthesis of a tribranched phenylethynyl-terminated aryl ether compound and its use as a reactive diluent for PETI-5 . J. Polym. Sci., Part A:Polym. Chem. , 2007 . 45 4844 - 4854 . DOI: 10.1002/pola.22223 http://doi.org/10.1002/pola.22223 .

Yu, P.; Wang, Y.; Yu, J.; Zhu, J.; Hu, Z . Development of novel cardo-containing phenylethynyl-terminated polyimide with high thermal properties . Polym. Adv. Technol. , 2017 . 28 222 - 232 . DOI: 10.1002/pat.3878 http://doi.org/10.1002/pat.3878 .

Yue, J.; Li, Y.; Zhao, Y.; Xiang, D.; Dai, Y . Thermal degradation behavior of carborane-containing phenylethynyl terminated imide systems . Polym. Degrad. Stabil. , 2016 . 129 286 - 295 . DOI: 10.1016/j.polymdegradstab.2016.05.006 http://doi.org/10.1016/j.polymdegradstab.2016.05.006 .

Wu, Y.; Yang, J.; Chen, G . Synthesis and characterization of a carborane-containing monofunctional imide monomer as a modifier for imide oligomer . High Perform. Polym. , 2017 . 30 812 - 820 . .

Zhou, D.; Yuan, L.; Hong, W.; Zhang, H.; Hu, A.; Yang, S . Molecular design of interpenetrating fluorinated polyimide network with enhanced high performance for heat-resistant matrix . Polymer , 2019 . 173 66 - 79 . DOI: 10.1016/j.polymer.2019.04.034 http://doi.org/10.1016/j.polymer.2019.04.034 .

Liu, Y.; Mo, S.; He, M.; Zhai, L.; Xu, C.; Fan, L . Phenylethynyl-terminated oligoimides based on bis( p -aminophenoxy)dimethyl silane: effect of siloxane structure on processability and thermal stability . High Perform. Polym. , 2018 . 31 651 - 661 . .

Rao, X.; Zhou, H; Dang, G.; Chen, C.; Wu, Z . New kinds of phenylethynyl-terminated polyimide oligomers with low viscosity and good hydrolytic stability . Polymer , 2006 . 47 6091 - 6098 . DOI: 10.1016/j.polymer.2006.06.037 http://doi.org/10.1016/j.polymer.2006.06.037 .

Srinivas, S.; Caputo, F. E.; Graham, M.; Gardner, S.; Davis, R. M.; McGrath, J. E.; Wilkes, G. L . Semicrystalline polyimides based on controlled molecular weight phthalimide end-capped 1,3-bis(4-aminophenoxy)benzene and 3,3',4,4'-biphenyltetracarboxylic dianhydride: synthesis, crystallization, melting, and thermal stability . Macromolecules , 1997 . 30 1012 - 1022 . DOI: 10.1021/ma9604597 http://doi.org/10.1021/ma9604597 .

Ratta, V.; Ayambem, A.; McGrath, J. E.; Wilkes, G. L . Crystallization and multiple melting behavior of a new semicrystalline polyimide based on 1,3-bis(4-aminophenoxy)benzene (TPER) and 3,3′,4,4′-biphenonetetracarboxylic dianhydride (BTDA) . Polymer , 2001 . 42 6173 - 6186 . DOI: 10.1016/S0032-3861(01)00010-6 http://doi.org/10.1016/S0032-3861(01)00010-6 .

Wu, X.; Yang, X.; Yu, R.; Zhao, X. J.; Zhang, Y.; Huang, W . Highly crosslinked and uniform thermoset epoxy microspheres: preparation and toughening study . Polymer , 2018 . 143 145 - 154 . DOI: 10.1016/j.polymer.2018.04.011 http://doi.org/10.1016/j.polymer.2018.04.011 .

Zheng, S.; Mi, Y . Miscibility and intermolecular specific interactions in blends of poly(hydroxyether of bisphenol A) and poly(4-vinyl pyridine) . Polymer , 2003 . 44 1067 - 1074 . DOI: 10.1016/S0032-3861(02)00878-9 http://doi.org/10.1016/S0032-3861(02)00878-9 .

Gupta. R. K., in Polymer and Composite Rheology , second edition, Marcel Dekker Inc. New York 2000 , p. 58.

Zhuang, Y.; Seong, J. G.; Do, Y. S.; Jo, H. J.; Lee, M. J.; Wang, G.; Guiver, M. D.; Lee, Y. M . Effect of isomerism on molecular packing and gas transport properties of poly(benzoxazole- co -imide)s . Macromolecules , 2014 . 47 7947 - 7957 . DOI: 10.1021/ma501891m http://doi.org/10.1021/ma501891m .

Santiago-García, J. L.; Álvarez, C.; Sánchez, F.; de la Campa, J. G . Gas transport properties of new aromatic polyimides based on 3,8-diphenylpyrene-1,2,6,7-tetracarboxylic dianhydride . J. Membr. Sci. , 2015 . 476 442 - 448 . DOI: 10.1016/j.memsci.2014.12.007 http://doi.org/10.1016/j.memsci.2014.12.007 .

Borek, J.; Osoba, W . The influence of the plasticization on free volume in polyvinyl chloride . J. Radioanal. Nucl. Chem. , 1996 . 211 61 - 67 . DOI: 10.1007/BF02036256 http://doi.org/10.1007/BF02036256 .

Larocca, N. M.; Pessan, L. A . Effect of antiplasticisation on the volumetric, gas sorption and transport properties of polyetherimide . J. Membr. Sci. , 2003 . 218 69 - 92 . DOI: 10.1016/S0376-7388(03)00139-X http://doi.org/10.1016/S0376-7388(03)00139-X .

Sharma, S. K.; Prakash, J.; Bahadur, J.; Sahu, M.; Mazumder, S.; Pujari, P. K . Free volume and lamellar structure of poly vinyl alcohol-nanosized BaTiO 3 composite: positron annihilation and small angle X-ray scattering study . Eur. Polym. J. , 2016 . 84 100 - 110 . DOI: 10.1016/j.eurpolymj.2016.09.007 http://doi.org/10.1016/j.eurpolymj.2016.09.007 .

Hrma, P . Arrhenius model for high-temperature glass-viscosity with a constant pre-exponential factor . J. Non-Cryst. Solids , 2008 . 354 1962 - 1968 . DOI: 10.1016/j.jnoncrysol.2007.11.016 http://doi.org/10.1016/j.jnoncrysol.2007.11.016 .

Acierno, D.; Brancaccio, A.; Curto, D.; La Mantia, F. P.; Valenza, A . Molecular weight dependency of rheological characteristics of linear low density polyethylene . J. Rheol. , 1985 . 29 323 - 334 . DOI: 10.1122/1.549793 http://doi.org/10.1122/1.549793 .

Mendelson, R. A . Melt viscosity behavior of some engineering thermoplastics . Polym. Eng. Sci. , 1983 . 23 79 - 85 . DOI: 10.1002/pen.760230206 http://doi.org/10.1002/pen.760230206 .

Macho, E.; Alegría, A.; Colmenero, J . Determining viscosity temperature behavior of four amorphous thermoplastics using a parallel plate technique . Polym. Eng. Sci. , 1987 . 27 810 - 815 . DOI: 10.1002/pen.760271107 http://doi.org/10.1002/pen.760271107 .

Yang, Y.; Fan, L.; Qu, X.; Ji, M.; Yang, S . Fluorinated phenylethynyl-terminated imide oligomers with reduced melt viscosity and enhanced melt stability . Polymer. , 2011 . 52 138 - 148 . DOI: 10.1016/j.polymer.2010.11.007 http://doi.org/10.1016/j.polymer.2010.11.007 .

Liu, C.; Qu, C.; Wang, C.; Cao, D.; Wang, D.; Xiao, W.; Feng, H.; Liu, P.; Bai, X . Non-isothermal curing kinetics, chemorheological behaviour, and IR spectral study of two trifunctional phenylethynyl-terminated imide oligomers compared with the corresponding bifunctional structure . Prog. React. Kinet. Mech. , 2019 . 41 1 - 13 . .

Zhang, D.; Wang, R.; Farhan, S.; Cai, Y.; Liu, J . Chemorheological behaviors of TDE-85 toughened by low viscosity liquid epoxy for RTM process . Polym. Test. , 2018 . 70 310 - 319 . DOI: 10.1016/j.polymertesting.2018.07.016 http://doi.org/10.1016/j.polymertesting.2018.07.016 .

Roller, M. B . Characterization of the time-temperature-viscosity behavior of curing B-staged epoxy resin . Polym. Eng. Sci. , 1975 . 15 406 - 414 . DOI: 10.1002/pen.760150603 http://doi.org/10.1002/pen.760150603 .

Stieghorst, J.; Doll, T . Rheological behavior of PDMS silicone rubber for 3D printing of medical implants . Addit. Manuf. , 2018 . 24 217 - 223 . .

Bullions, T. A.; McGrath, J. E.; Loos, A. C . Development of a two-stage, dual-Arrhenius rheology model for a high-performance phenylethynyl-terminated poly(etherimide) . Polym. Eng. Sci. , 2002 . 42 2182 - 2192 . DOI: 10.1002/pen.11108 http://doi.org/10.1002/pen.11108 .

Teresa Rodríguez-Hernández, M.; Angulo-Sánchez, J. L.; Pérez-Chantaco, A . Determination of the molecular characteristics of commercial polyethylenes with different architectures and the relation with the melt flow index . J. Appl. Polym. Sci. , 2007 . 104 1572 - 1578 . DOI: 10.1002/app.25625 http://doi.org/10.1002/app.25625 .

Kemblowski, Z.; Torzecki, J . Determination of the weight-average molecular-weight of polyamide-6 on the basis of melt viscosity . Rheol. Acta. , 1983 . 22 186 - 196 . DOI: 10.1007/BF01332371 http://doi.org/10.1007/BF01332371 .

Lyu, M. Y.; Lee, J. S.; Pae, Y . Study of mechanical and rheological behaviors of linear and branched polycarbonates blends . J. Appl. Polym. Sci. , 2001 . 80 1814 - 1824 . DOI: 10.1002/app.1277 http://doi.org/10.1002/app.1277 .

Langston, J. A.; Colby, R. H.; Chung, T. C. M.; Shimizu, F.; Suzuki, T.; Aoki, M . Synthesis and characterization of long chain branched isotactic polypropylene via metallocene catalyst and T-teagent . Macromolecules , 2007 . 40 2712 - 2720 . DOI: 10.1021/ma062111+ http://doi.org/10.1021/ma062111+ .

Laius, L. A.; Dergacheva, Y. N.; Bessonov, M. I.; Koton, M. M . The nature of the higher thermal stability of rigid polyimides . Polymer Science U.S.S.R. , 1984 . 26 1094 - 1102 . DOI: 10.1016/0032-3950(84)90325-3 http://doi.org/10.1016/0032-3950(84)90325-3 .

浏览量

1797

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Synthesis of Eugenol Bio-based Reactive Epoxy Diluent and Study on the Curing Kinetics and Properties of the Epoxy Resin System

2026-9 Contents

End-group and Side-chain Dual-engineering of Selenium-fused Acceptors for 20.08% Efficiency Polymer Solar Cells with Low Energy Loss

Advances in Polymer-based Circularly Polarized Luminescent Materials

Experimental Investigation of Graphene and TiO2 Reinforced Poly(vinyl alcohol)-based Fiber Metal Laminates