Effect of Different Shear Modes on Morphology and Mechanical Properties of Polypropylene Pipes Produced by Rotational Shear

Wei-Chen Zhou; Zu-Chen Du; Hao Yang; Jun-Jie Li; Ying Zhang; Xue-Qin Gao; Qiang Fu

doi:10.1007/s10118-020-2477-8

Your Location：

Home >

Browse articles >

Effect of Different Shear Modes on Morphology and Mechanical Properties of Polypropylene Pipes Produced by Rotational Shear

ARTICLE | Updated：2020-09-02

- Effect of Different Shear Modes on Morphology and Mechanical Properties of Polypropylene Pipes Produced by Rotational Shear
- Effect of Different Shear Modes on Morphology and Mechanical Properties of Polypropylene Pipes Produced by Rotational Shear
- Chinese Journal of Polymer Science 2020年38卷第12期页码：1392-1402
- Affiliations：
  
  College of Polymer Science and Engineering, Sichuan University, Chengdu 610065, China
- Author bio：
  
  gaoxueqin@scu.edu.cn (X.Q.G.)
  qiangfu@scu.edu.cn (Q.F.)
- Funds：
  
  The work was financially supported by the National Natural Science Foundation of China (No. 21627804).
- DOI：10.1007/s10118-020-2477-8
  中图分类号：
- 收稿：2020-03-23，
  
  修回：2020-7-1，
  
  录用：2020-7-6，
  
  网络首发：2020-09-02，
  
  纸质出版：2020-09-10
- Accepted：
Scan QR Code
Zhou, W. C.; Du, Z. C.; Yang, H.; Li, J. J.; Zhang, Y.; Gao, X. Q.; Fu, Q. Effect of different shear modes on morphology and mechanical properties of polypropylene pipes produced by rotational shear. Chinese J. Polym. Sci. 2020, 38, 1392–1402

Wei-Chen Zhou, Zu-Chen Du, Hao Yang, et al. Effect of Different Shear Modes on Morphology and Mechanical Properties of Polypropylene Pipes Produced by Rotational Shear[J]. Chinese Journal of Polymer Science, 2020, 38(12): 1392-1402.
Zhou, W. C.; Du, Z. C.; Yang, H.; Li, J. J.; Zhang, Y.; Gao, X. Q.; Fu, Q. Effect of different shear modes on morphology and mechanical properties of polypropylene pipes produced by rotational shear. Chinese J. Polym. Sci. 2020, 38, 1392–1402 DOI： 10.1007/s10118-020-2477-8.

Wei-Chen Zhou, Zu-Chen Du, Hao Yang, et al. Effect of Different Shear Modes on Morphology and Mechanical Properties of Polypropylene Pipes Produced by Rotational Shear[J]. Chinese Journal of Polymer Science, 2020, 38(12): 1392-1402. DOI： 10.1007/s10118-020-2477-8.

摘要

Abstract

Oriented “shish-kebab” structures could be obtained by shearing to enhance the mechanical properties of polymer samples markedly. However

the effect of shear mode on mechanical properties is still uncertain. The study of stepped hoop shear field on the isotactic polypropylene (

PP) pipe was developed through applying a self-designed rotational shear system (RSS). The effect of stepped shear field on the microstructure and comprehensive properties of

PP pipe was investigated by the comparison with continuous shear. It could be found that the loosely-assembled shish-kebabs with the larger size were formed in the continuous shear pipes

but the smaller and tightly-stacked ones existed in the pipes with stepped shear. Surprisingly

due to differential morphologies under different shear modes

better comprehensive mechanical properties were obtained in the pipes with stepped shear.

关键词

Keywords

references

Deng, C.; Jin, B.; Zhao, Z.; Shen, K.; Zhang, J. . The influence of hoop shear field on the structure and performances of glass fiber reinforced three-layer polypropylene random copolymer pipe . J. Appl. Polym. Sci. , 2019 . 136 .

Huan, Q.; Zhu, S.; Ma, Y.; Zhang, J.; Zhang, S.; Feng, X.; Han, K.; Yu, M. . Markedly improving mechanical properties for isotactic polypropylene with large-size spherulites by pressure-induced flow processing . Polymer , 2013 . 54 1177 - 1183 . DOI: 10.1016/j.polymer.2012.12.055 http://doi.org/10.1016/j.polymer.2012.12.055 .

Mi, D.; Xia, C.; Jin, M.; Wang, F.; Shen, K.; Zhang, J. . Quantification of the effect of shish-kebab structure on the mechanical properties of polypropylene samples by controlling shear layer thickness . Macromolecules , 2016 . 49 4571 - 4578 . DOI: 10.1021/acs.macromol.6b00822 http://doi.org/10.1021/acs.macromol.6b00822 .

Li, X.; Pi, L.; Nie, M.; Wang, Q. . Joint effects of rotational extrusion and TiO 2 on performance and antimicrobial properties of extruded polypropylene copolymer pipes . J. Appl. Polym. Sci. , 2015 . 132 .

Yang, H.; Luo, X.; Shen, K.; Yuan, Y.; Fu, Q.; Gao, X.; Jiang, L. . The role of mandrel rotation speed on morphology and mechanical properties of polyethylene pipes produced by rotational shear . Polymer , 2019 . 184 121915 .

Du, Z. C.; Yang, H.; Luo, X. H.; Xie, Z. X.; Gao, X. Q. . The role of mold temperature on morphology and mechanical properties of PE pipe produced by rotational shear . Chinese. J. Polym. Sci. , 2020 . 38 653 - 664 . DOI: 10.1007/s10118-020-2363-4 http://doi.org/10.1007/s10118-020-2363-4 .

Han, R.; Nie, M.; Wang, Q. . Control over β -form hybrid shish-kebab crystals in polypropylene pipe via coupled effect of self-assembly β nucleating agent and rotation extrusion . J. Taiwan. Inst. Chem. E , 2015 . 52 158 - 164 . DOI: 10.1016/j.jtice.2015.02.002 http://doi.org/10.1016/j.jtice.2015.02.002 .

Min, N.; Bai, S.; Wang, Q. . Effect of the inner wall cooling rate on the structure and properties of a polyethylene pipe extruded at a high rotation speed . J. Appl. Polym. Sci. , 2011 . 119 1659 - 1666 . DOI: 10.1002/app.32840 http://doi.org/10.1002/app.32840 .

Tang, H. I.; Hiltner, A.; Baer, E. . Biaxial orientation of polypropylene by hydrostatic solid state extrusion. Part III: mechanical properties and deformation mechanisms . Polym. Eng. Sci. , 1987 . 27 876 - 886 . DOI: 10.1002/pen.760271203 http://doi.org/10.1002/pen.760271203 .

Litvinov, V. M.; Soliman, M. . The effect of storage of poly(propylene) pipes under hydrostatic pressure and elevated temperatures on the morphology, molecular mobility and failure behaviour . Polymer , 2005 . 46 3077 - 3089 . DOI: 10.1016/j.polymer.2005.01.074 http://doi.org/10.1016/j.polymer.2005.01.074 .

Chan, C. K.; Whitehouse, C.; Gao, P.; Chai, C. K. . Flow induced chain alignment and disentanglement as the viscosity reduction mechanism within TLCP/HDPE blends . Polymer , 2001 . 42 7847 - 7856 . DOI: 10.1016/S0032-3861(01)00265-8 http://doi.org/10.1016/S0032-3861(01)00265-8 .

Nie, M.; Han, R.; Wang, Q. . Formation and alignment of hybrid shish-kebab morphology with rich beta crystals in an isotactic polypropylene pipe . Ind. Eng. Chem. Res. , 2014 . 53 4142 - 4146 . DOI: 10.1021/ie403944k http://doi.org/10.1021/ie403944k .

Pi, L.; Nie, M.; Wang, Q. . Crystalline composition and morphology in isotactic polypropylene pipe under combining effects of rotation extrusion and fibril β -nucleating agent . J. Vinyl. Addit. Techn. , 2019 . 25 E195 - E202 . DOI: 10.1002/vnl.21686 http://doi.org/10.1002/vnl.21686 .

Luo, G.; Li, W.; Liang, W.; Liu, G.; Ma, Y.; Niu, Y.; Li, G. . Coupling effects of glass fiber treatment and matrix modification on the interfacial microstructures and the enhanced mechanical properties of glass fiber/polypropylene composites . Compos. Part B-Eng. , 2017 . 111 190 - 199 . DOI: 10.1016/j.compositesb.2016.12.016 http://doi.org/10.1016/j.compositesb.2016.12.016 .

Kimata, S.; Sakurai, T.; Nozue, Y.; Kasahara, T.; Yamaguchi, N.; Karino, T.; Shibayama, M.; Kornfield, J. A. . Molecular basis of the shish-kebab morphology in polymer crystallization . Science , 2007 . 316 1014 - 1017 . DOI: 10.1126/science.1140132 http://doi.org/10.1126/science.1140132 .

Somani, R. H.; Yang, L.; Zhu, L.; Hsiao, B. S. . Flow-induced shish-kebab precursor structures in entangled polymer melts . Polymer , 2005 . 46 8587 - 8623 . DOI: 10.1016/j.polymer.2005.06.034 http://doi.org/10.1016/j.polymer.2005.06.034 .

Hsiao, B. S.; Yang, L.; Somani, R. H.; Avila-Orta, C. A.; Zhu, L. . Unexpected shish-kebab structure in a sheared polyethylene melt . Phys. Rev. Lett. , 2005 . 94 117802 .

Yang, J.; Wang, C.; Wang, K.; Zhang, Q.; Chen, F.; Du, R.; Fu, Q. . Direct formation of nanohybrid shish-kebab in the injection molded car of polyethylene/multiwalled carbon nanotubes composite . Macromolecules , 2009 . 42 7016 - 7023 . DOI: 10.1021/ma901266u http://doi.org/10.1021/ma901266u .

Hu, W.; Frenkel, D.; Mathot, V. B. F. . Simulation of shish-kebab crystallite induced by a single prealigned macromolecule . Macromolecules , 2002 . 35 7172 - 7174 . DOI: 10.1021/ma0255581 http://doi.org/10.1021/ma0255581 .

Kawaguchi, K. . Mechanical properties and transparency of injection-molded polyacetal with branched and linear structure: influence of crystalline morphology . J. Appl. Polym. Sci. , 2006 . 100 3382 - 3392 . DOI: 10.1002/app.23777 http://doi.org/10.1002/app.23777 .

Lei, J.; Jiang, C.; Shen, K. . Biaxially self-reinforced high-density polyethylene prepared by dynamic packing injection molding. I. Processing parameters and mechanical properties . J. Appl. Polym. Sci. , 2004 . 93 1584 - 1590 . DOI: 10.1002/app.20640 http://doi.org/10.1002/app.20640 .

Na, B.; Zhang, Q.; Fu, Q.; Zhang, G.; Shen, K. . Super polyolefin blends achieved via dynamic packing injection molding: the morphology and mechanical properties of HDPE/EVA blends . Polymer , 2002 . 43 7367 - 7376 . DOI: 10.1016/S0032-3861(02)00637-7 http://doi.org/10.1016/S0032-3861(02)00637-7 .

Chen, Y. H.; Zhong, G. J.; Wang, Y.; Li, Z. M.; Li, L. . Unusual tuning of mechanical properties of isotactic polypropylene using counteraction of shear flow and β -nucleating agent on β -form nucleation . Macromolecules , 2009 . 42 4343 - 4348 . DOI: 10.1021/ma900411f http://doi.org/10.1021/ma900411f .

Nie, M.; Wang, Q.; Bai, S. B. . Morphology and property of polyethylene pipe extruded at the low mandrel rotation . Polym. Eng. Sci. , 2010 . 50 1743 - 1750 . DOI: 10.1002/pen.21700 http://doi.org/10.1002/pen.21700 .

Long, J.; Shen, K.; Ji, J.; Guan, Q. . A mandrel-rotating die to produce high-hoop-strength HDPE pipe by self-reinforcement . J. Appl. Polym. Sci. , 1998 . 69 323 - 328 . DOI: 10.1002/(SICI)1097-4628(19980711)69:2<323::AID-APP13>3.0.CO;2-X http://doi.org/10.1002/(SICI)1097-4628(19980711)69:2<323::AID-APP13>3.0.CO;2-X .

Nie, M.; Li, X.; Hu, X.; Wang, Q. . Effect of die temperature on morphology and performance of polyethylene pipe prepared via mandrel rotation extrusion . J. Macromol. Sci. B , 2014 . 53 1442 - 1452 . DOI: 10.1080/00222348.2014.928161 http://doi.org/10.1080/00222348.2014.928161 .

Han, R.; Nie, M.; Bai, S. B.; Wang, Q. . Control over crystalline form in polypropylene pipe via mandrel rotation extrusion . Polym. Bull. , 2013 . 70 2083 - 2096 . DOI: 10.1007/s00289-013-0963-7 http://doi.org/10.1007/s00289-013-0963-7 .

Nie, M.; Bai, S.; Wang, Q. . High-density polyethylene pipe with high resistance to slow crack growth prepared via rotation extrusion . Polym. Bull. , 2010 . 65 609 - 621 . DOI: 10.1007/s00289-010-0270-5 http://doi.org/10.1007/s00289-010-0270-5 .

Xie, Z.; Gao, N.; Du, Z.; Yang, H.; Shen, K.; Fu, Q.; Gao, X. . Role of melt plasticizing temperature in morphology and properties of PE100 pipes prepared by a rotational shear system . ACS Omega , 2020 . 5 12660 - 12671 . DOI: 10.1021/acsomega.9b04138 http://doi.org/10.1021/acsomega.9b04138 .

Kitade, S.; Kurihara, H.; Asuka, K.; Katsuno, S.; Akiba, I.; Sakurai, K. . Oriented crystallization of long chain branched polypropylene induced by step-shear deformation in pre-crystallization regime . Polymer , 2017 . 116 395 - 402 . DOI: 10.1016/j.polymer.2017.02.005 http://doi.org/10.1016/j.polymer.2017.02.005 .

Venerus, D. C.; Schieber, J. D.; Iddir, H.; Guzman, J. D.; Broerman, A. W. . Relaxation of anisotropic thermal diffusivity in a polymer melt following step shear strain . Phys. Rev. Lett. , 1999 . 82 366 - 369 . DOI: 10.1103/PhysRevLett.82.366 http://doi.org/10.1103/PhysRevLett.82.366 .

Li, Y.; Wen, X.; Nie, M.; Wang, Q. . Controllable reinforcement of stiffness and toughness of polypropylene via thermally induced self-assembly of β -nucleating agent . J. Appl. Polym. Sci. , 2014 . 131 40605 .

Han, R.; Nie, M.; Wang, Q.; Yan, S. . Self-assembly β nucleating agent induced polymorphic transition from α -form shish kebab to β -form highly ordered lamella under intense shear field . Ind. Eng. Chem. Res. , 2017 . 56 2764 - 2772 . DOI: 10.1021/acs.iecr.6b04908 http://doi.org/10.1021/acs.iecr.6b04908 .

Jones, A. T.; Aizlewood, J. M.; Beckett, D. . Crystalline forms of isotactic polypropylene . Macromol. Chem. Phys. , 1964 . 75 134 - 158 . DOI: 10.1002/macp.1964.020750113 http://doi.org/10.1002/macp.1964.020750113 .

Qiang, Z.; Shangguan, Y.; Tong, L.; Peng, M. . Effect of vibration on crystal morphology and structure of isotactic polypropylene in nonisothermal crystallization . J. Appl. Polym. Sci. , 2004 . 94 2187 - 2195 . DOI: 10.1002/app.21166 http://doi.org/10.1002/app.21166 .

Chen, H. B.; Karger-Kocsis, J.; Wu, J. S.; Varga, J. . Fracture toughness of α - and β -phase polypropylene homopolymers and random- and block-copolymers . Polymer , 2002 . 43 6505 - 6514 . DOI: 10.1016/S0032-3861(02)00590-6 http://doi.org/10.1016/S0032-3861(02)00590-6 .

Policianová, O.; Hodan, J.; Brus, J.; Kotek, J. . Origin of toughness in β -polypropylene: the effect of molecular mobility in the amorphous phase . Polymer , 2015 . 60 107 - 114 . DOI: 10.1016/j.polymer.2015.01.047 http://doi.org/10.1016/j.polymer.2015.01.047 .

Ferro, D. R.; Meille, S. V.; Brückner, S. . Energy calculations for isotactic polypropylene: a contribution to clarify the β crystalline structure . Macromolecules , 1998 . 31 6926 - 6934 . DOI: 10.1021/ma9804592 http://doi.org/10.1021/ma9804592 .

Vleeshouwers, S. . Simultaneous in-situ WAXS/SAXS and DSC study of the recrystallization and melting behaviour of the α and β form of i PP . Polymer , 1997 . 38 3213 - 3221 . DOI: 10.1016/S0032-3861(96)00894-4 http://doi.org/10.1016/S0032-3861(96)00894-4 .

Li, H.; Sun, X.; Yan, S.; Schultz, J. M. . Initial stage of i PP β to α growth transition induced by stepwise crystallization . Macromolecules , 2008 . 41 5062 - 5064 . DOI: 10.1021/ma702725g http://doi.org/10.1021/ma702725g .

Wang, J.; Ren, Z.; Sun, X.; Li, H.; Yan, S. . The βα growth transition of isotactic polypropylene during stepwise crystallization at elevated temperature . Colloid. Polym. Sci. , 2015 . 293 2823 - 2830 . DOI: 10.1007/s00396-015-3599-3 http://doi.org/10.1007/s00396-015-3599-3 .

Varga, J. . β -Modification of polypropylene and its two-component systems . J. Therm. Anal. , 1989 . 35 1891 - 1912 . DOI: 10.1007/BF01911675 http://doi.org/10.1007/BF01911675 .

Doufas, A. K.; Dairanieh, I. S.; McHugh, A. J. . A continuum model for flow-induced crystallization of polymer melts . J. Rheol. Macromolecul. , 1999 . 43 85 - 109 . DOI: 10.1122/1.550978 http://doi.org/10.1122/1.550978 .

Coppola, S.; Grizzuti, N.; Maffettone, P. L. . Microrheological modeling of flow-induced crystallization . Macromolecules , 2001 . 34 5030 - 5036 . DOI: 10.1021/ma010275e http://doi.org/10.1021/ma010275e .

Yan, T.; Zhao, B.; Cong, Y.; Fang, Y.; Cheng, S.; Li, L.; Pan, G.; Wang, Z.; Li, X.; Bian, F. . Critical strain for shish-kebab formation . Macromolecules , 2010 . 43 602 - 605 . DOI: 10.1021/ma9020642 http://doi.org/10.1021/ma9020642 .

Ju, J.; Wang, Z.; Su, F.; Ji, Y.; Yang, H.; Chang, J.; Ali, S.; Li, X.; Li, L. . Extensional flow-induced dynamic phase transitions in isotactic polypropylene . Macromol. Rapid Commun. , 2016 . 37 1441 - 1445 . DOI: 10.1002/marc.201600185 http://doi.org/10.1002/marc.201600185 .

Heeley, E. L.; Fernyhough, C. M.; Graham, R. S.; Olmsted, P. D.; Inkson, N. J.; Embery, J.; Groves, D. J.; McLeish, T. C. B.; Morgovan, A. C.; Meneau, F.; Bras, W.; Ryan, A. J. . Shear-induced crystallization in blends of model linear and long-chain branched hydrogenated polybutadienes . Macromolecules , 2006 . 39 5058 - 5071 . DOI: 10.1021/ma0606307 http://doi.org/10.1021/ma0606307 .

Zhang, C.; Liu, G.; Zhao, Y.; Wang, K.; Dong, X.; Li, Z.; Wang, L.; Wang, D. . Exploring the polymorphic behavior of a β -nucleated propylene-ethylene random copolymer under shear flow . Polym. Crystallizat. , 2020 . 3 e10105 .

Huo, H.; Jiang, S.; An, L.; Feng, J. . Influence of shear on crystallization behavior of the β phase in isotactic polypropylene with β -nucleating agent . Macromolecules , 2004 . 37 2478 - 2483 . DOI: 10.1021/ma0358531 http://doi.org/10.1021/ma0358531 .

Chen, Y. H.; Mao, Y. M.; Li, Z. M.; Hsiao, B. S. . Competitive growth of α - and β -crystals in β -nucleated isotactic polypropylene under shear flow . Macromolecules , 2010 . 43 6760 - 6771 . DOI: 10.1021/ma101006e http://doi.org/10.1021/ma101006e .

Xia, C.; Du, H.; Wang, F.; La, R.; Mi, D.; Li, X.; Zhang, J. . A novel crystal morphology of isotactic polypropylene induced by pressure vibration field: α banded spherulite . Mater. Lett. , 2015 . 153 66 - 69 . DOI: 10.1016/j.matlet.2015.04.005 http://doi.org/10.1016/j.matlet.2015.04.005 .

Shi, Y.; Dou, Q. . The relationship between structure and properties of β -phase isotactic polypropylene . Adv. Mat. Res. , 2011 . 233-235 2129 - 2137 . .

Keum, J. K.; Zuo, F.; Hsiao, B. S. . Formation and stability of shear-induced shish-kebab structure in highly entangled melts of UHMWPE/HDPE blends . Macromolecules , 2008 . 41 4766 - 4776 . DOI: 10.1021/ma800063e http://doi.org/10.1021/ma800063e .

Alexander, L. . X-ray diffraction methods in polymer science . J. Mater. Sci. , 1971 . 6 93 - 93 . DOI: 10.1007/BF00550300 http://doi.org/10.1007/BF00550300 .

Tang, Y.; Jiang, Z.; Men, Y.; An, L.; Enderle, H. F.; Lilge, D.; Roth, S. V.; Gehrke, R.; Rieger, J. . Uniaxial deformation of overstretched polyethylene: in-situ synchrotron small angle X-ray scattering study . Polymer , 2007 . 48 5125 - 5132 . DOI: 10.1016/j.polymer.2007.06.056 http://doi.org/10.1016/j.polymer.2007.06.056 .

Men, Y.; Rieger, J.; Lindner, P.; Enderle, H. F.; Lilge, D.; Kristen, M. O.; Mihan, S.; Jiang, S. . Structural changes and chain radius of gyration in cold-drawn polyethylene after annealing: small- and wide-angle X-ray scattering and small-angle neutron scattering studies . J. Phys. Chem. B , 2005 . 109 16650 - 16657 . DOI: 10.1021/jp052723g http://doi.org/10.1021/jp052723g .

Jiang, Z.; Tang, Y.; Men, Y.; Enderle, H. F.; Lilge, D.; Roth, S. V.; Gehrke, R.; Rieger, J. . Structural evolution of tensile-deformed high-density polyethylene during annealing: scanning synchrotron small-angle X-ray scattering study . Macromolecules , 2007 . 40 7263 - 7269 . DOI: 10.1021/ma0627572 http://doi.org/10.1021/ma0627572 .

Wang, Z.; An, M.; Xu, H.; Lv, Y.; Tian, F.; Gu, Q. . Structural evolution from shish-kebab to fibrillar crystals during hot-stretching process of gel spinning ultra-high molecular weight polyethylene fibers obtained from low concentration solution . Polymer , 2017 . 120 244 - 254 . DOI: 10.1016/j.polymer.2017.05.062 http://doi.org/10.1016/j.polymer.2017.05.062 .

Alexander, L. E. X-ray diffraction methods in polymer science . John Wiley & amp; Sons Inc: New York, 1979 .

Huang, Y. F.; Xu, J. Z.; Li, J. S.; He, B. X.; Xu, L.; Li, Z. M. . Mechanical properties and biocompatibility of melt processed, self-reinforced ultrahigh molecular weight polyethylene . Biomaterials , 2014 . 35 6687 - 6697 . DOI: 10.1016/j.biomaterials.2014.04.077 http://doi.org/10.1016/j.biomaterials.2014.04.077 .

Kalay, G.; Kalay, C. R. . Interlocking shish-kebab morphology in polybutene-1 . J. Polym. Sci., Part B: Polym. Phys. , 2002 . 40 1828 - 1834 . DOI: 10.1002/polb.10246 http://doi.org/10.1002/polb.10246 .

Fu, J.; Ghali, B. W.; Lozynsky, A. J.; Oral, E.; Muratoglu, O. K. . Ultra high molecular weight polyethylene with improved plasticity and toughness by high temperature melting . Polymer , 2010 . 51 2721 - 2731 . DOI: 10.1016/j.polymer.2010.04.003 http://doi.org/10.1016/j.polymer.2010.04.003 .

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Preparation and Characterization of Multilayered High-density Polyethylene with Tunable Crystalline Structure

The Role of Mold Temperature on Morphology and Mechanical Properties of PE Pipe Produced by Rotational Shear

Constructing High-content, Highly Ordered Shish-Kebab Crystals during Hot-stretching via Varying Contents of Reserved Shish in Ultra-long Chain Ultra-high Molecular Weight Polyethylene Gel Systems

The Influence of Ethyl Branch on Formation of Shish-Kebab Crystals in Bimodal Polyethylene under Shear at Low Temperature

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport