Time and Temperature Dependence of the Structural Evolution for Polyamide 1012

Xin-Ran Liu; Yu Wang; Li-Yuan Liu; Xia Dong; Du-Jin Wang

doi:10.1007/s10118-020-2434-6

Your Location：

Home >

Browse articles >

Time and Temperature Dependence of the Structural Evolution for Polyamide 1012

ARTICLE | Updated：2020-06-09

- Time and Temperature Dependence of the Structural Evolution for Polyamide 1012
- Time and Temperature Dependence of the Structural Evolution for Polyamide 1012
- Chinese Journal of Polymer Science 2020年38卷第9期页码：993-998
- Affiliations：
  
  a.CAS Key Laboratory of Engineering Plastics, CAS Research/Education Center for Excellence in Molecular Sciences, Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
  b.University of Chinese Academy of Sciences, Beijing 100049, China
  c.Shenzhen Key Laboratory of Polymer Science and Technology, College of Materials Science and Engineering, Shenzhen University, Shenzhen 518060, China
- Author bio：
  
  xiadong@iccas.ac.cn
- Funds：
  
  This work was financially supported by the National Key R&D Program of China (No. 2017YFB0307600) and the National Natural Science Foundation of China (No. 21574140).
- DOI：10.1007/s10118-020-2434-6
  中图分类号：
- 收稿：2020-02-09，
  
  修回：2020-3-19，
  
  录用：2020-3-24，
  
  网络首发：2020-06-09，
  
  纸质出版：2020-09
- Accepted：
Scan QR Code
Liu, X. R.; Wang, Y.; Liu, L. Y.; Dong, X.; Wang, D. J. Time and temperature dependence of the structural evolution for polyamide 1012. Chinese J. Polym. Sci. 2020, 38, 993–998

Xin-Ran Liu, Yu Wang, Li-Yuan Liu, et al. Time and Temperature Dependence of the Structural Evolution for Polyamide 1012[J]. Chinese Journal of Polymer Science, 2020, 38(9): 993-998.
Liu, X. R.; Wang, Y.; Liu, L. Y.; Dong, X.; Wang, D. J. Time and temperature dependence of the structural evolution for polyamide 1012. Chinese J. Polym. Sci. 2020, 38, 993–998 DOI： 10.1007/s10118-020-2434-6.

Xin-Ran Liu, Yu Wang, Li-Yuan Liu, et al. Time and Temperature Dependence of the Structural Evolution for Polyamide 1012[J]. Chinese Journal of Polymer Science, 2020, 38(9): 993-998. DOI： 10.1007/s10118-020-2434-6.

摘要

Abstract

The rheological property evolution of polyamide 1012 (PA1012) in the isothermal process in molten state has been investigated. The results show that the viscosity increases and crosslinking reaction occurs simultaneously together with the increase of temperature

thus causing the variation of storage modulus (

′) and loss modulus (

″) in the repeated frequency sweeps with residual time. This research has pointed out that the superposition is valid for monitoring the complex behavior composed of the viscosity increasing and crosslink occurring process by tracing the variation behavior of the crossover points of

′ and

″ with time

revealing the same time-temperature dependence of the two reactions in the isothermal process. A normalized master curve has been proposed to describe the melt behavior at a given temperature.

关键词

Keywords

references

Wilzer, J.; Windmann, M.; Weber, S.; Hill, H.; Bennekom, A. V.; Theisen, W. . Thermal conductivity of advanced TiC reinforced metal matrix composites for polymer processing applications . J. Compos. Mater. , 2015 . 49 243 - 250 . DOI: 10.1177/0021998313516143 http://doi.org/10.1177/0021998313516143 .

Schaller, R.; Neerincx, P. E.; Meijer, H. E. H. . Hierarchical and fractal structuring in polymer processing . Macromol. Mater. Eng. , 2017 . 302 1600524 DOI: 10.1002/mame.201600524 http://doi.org/10.1002/mame.201600524 .

Al-Mezrakchi, R. Y. H. . An investigation into scalability production of ultra-fine nanofiber using electrospinning systems . Fibers Polym. , 2018 . 19 105 - 115 . DOI: 10.1007/s12221-018-7506-z http://doi.org/10.1007/s12221-018-7506-z .

Karbownik, I.; Rac, O.; Fiedot, M.; Suchorska-Woźniak, P.; Teterycz, H. . In situ preparation of silver-polyacrylonitrile nanocomposite fibres . Eur. Polym. J. , 2015 . 69 385 - 395 . DOI: 10.1016/j.eurpolymj.2015.06.024 http://doi.org/10.1016/j.eurpolymj.2015.06.024 .

Yang, Y.; Yang, B.; Zhu, S.; Chen, X. . Online quality optimization of the injection molding process via digital image processing and model-free optimization . J. Mater. Process. Technol. , 2015 . 226 85 - 98 . DOI: 10.1016/j.jmatprotec.2015.07.001 http://doi.org/10.1016/j.jmatprotec.2015.07.001 .

La, R.; Zhou, Q.; Xia, C.; Mi, D.; Zhang, J. . The banded spherulites of i PP induced by pressure vibration injection molding . Chinese J. Polym. Sci. , 2015 . 33 1625 - 1632 . DOI: 10.1007/s10118-015-1708-x http://doi.org/10.1007/s10118-015-1708-x .

Schäfer, C.; Meyer, S. P.; Osswald, T. A. . A novel extrusion process for the production of polymer micropellets . Polym. Eng. Sci. , 2018 . 58 2264 - 2275 . DOI: 10.1002/pen.24847 http://doi.org/10.1002/pen.24847 .

Huang, Z.; Luo, P.; Tong, J.; Su, F. . Velocity distribution of extensional flow fields in an eccentric cylinder of an extensional extruder . J. Macromol. Sci., Part B: Phys. , 2018 . 57 732 - 745 . DOI: 10.1080/00222348.2018.1527517 http://doi.org/10.1080/00222348.2018.1527517 .

Ji, Z.; Zhang, X.; Yan, C.; Jia, X.; Xia, Y.; Wang, X.; Zhou, F. . 3D printing of photocuring elastomers with excellent mechanical strength and resilience . Macromol. Rapid Commun. , 2019 . 40 1800873 DOI: 10.1002/marc.201800873 http://doi.org/10.1002/marc.201800873 .

Li, X.; Yu, R.; He, Y.; Zhang, Y.; Yang, X.; Zhao, X.; Huang, W. . Self-healing polyurethane elastomers based on a disulfide bond by digital light processing 3D printing . ACS Macro Lett. , 2019 . 8 1511 - 1516 . DOI: 10.1021/acsmacrolett.9b00766 http://doi.org/10.1021/acsmacrolett.9b00766 .

Shangguan, Y.; Zhang, C.; Xie, Y.; Chen, R.; Jin, L.; Zheng, Q. . Study on degradation and crosslinking of impact polypropylene copolymer by dynamic rheological measurement . Polymer , 2010 . 51 500 - 506 . DOI: 10.1016/j.polymer.2009.11.066 http://doi.org/10.1016/j.polymer.2009.11.066 .

Cuadri, A. A.; Martín-Alfonso, J. E. . The effect of thermal and thermo-oxidative degradation conditions on rheological, chemical and thermal properties of HDPE . Polym. Degrad. Stab. , 2017 . 141 11 - 18 . DOI: 10.1016/j.polymdegradstab.2017.05.005 http://doi.org/10.1016/j.polymdegradstab.2017.05.005 .

Kruse, M.; Wagner, M. H. . Time-resolved rheometry of poly(ethylene terephthalate) during thermal and thermo-oxidative degradation . Rheol. Acta , 2016 . 55 789 - 800 . DOI: 10.1007/s00397-016-0955-2 http://doi.org/10.1007/s00397-016-0955-2 .

Filippone, G.; Carroccio, S. C.; Mendichi, R.; Gioiella, L.; Dintcheva, N. T.; Gambarotti, C. . Time-resolved rheology as a tool to monitor the progress of polymer degradation in the melt state. Part I: thermal and thermo-oxidative degradation of polyamide 11 . Polymer , 2015 . 72 134 - 141 . DOI: 10.1016/j.polymer.2015.06.059 http://doi.org/10.1016/j.polymer.2015.06.059 .

Salehiyan, R.; Bandyopadhyay. J.; Ray. S. . Mechanism of thermal degradation-induced gel formation in polyamide 6/ethylene vinyl alcohol blend nanocomposites studied by time-resolved rheology and hyphenated thermogravimetric analyzer Fourier transform infrared spectroscopy mass spectroscopy: synergistic role of nanoparticles and maleic anhydride-grafted polypropylene . ACS Omega , 2019 . 4 9569 - 9582 . DOI: 10.1021/acsomega.9b00940 http://doi.org/10.1021/acsomega.9b00940 .

Dong, S.; Zhu, P.; Liu, J.; Wang, D.; Dong, X. . Thermal treatment effects on the microstructure and tensile properties of transparent polyamides . Acta Polymerica Sinica (in Chinese) , 2019 . 50 189 - 198 . .

Wang, L.; Dong, X.; Huang, M.; Müller, A. J.; Wang, D. . Self-associated polyamide alloys with tailored polymorphism transition and lamellar thickening for advanced mechanical application . ACS Appl. Mater. Interfaces , 2017 . 9 19238 - 19247 . DOI: 10.1021/acsami.7b04691 http://doi.org/10.1021/acsami.7b04691 .

Gao, Y.; Dong, X.; Wang, L.; Liu, G.; Liu, X.; Tuinea-Bobe, C.; Whiteside, B.; Coates, P.; Wang, D.; Han, C. C. . Flow-induced crystallization of long chain aliphatic polyamides under a complex flow field: inverted anisotropic structure and formation mechanism . Polymer , 2015 . 73 91 - 101 . DOI: 10.1016/j.polymer.2015.07.029 http://doi.org/10.1016/j.polymer.2015.07.029 .

Suchocki, C.; Molak, R. . Rheological properties of polyamide: experimental studies and constitutive modeling . Chinese J. Polym. Sci. , 2019 . 37 178 - 188 . DOI: 10.1007/s10118-019-2180-9 http://doi.org/10.1007/s10118-019-2180-9 .

Hoffmann, B.; Kressler, J.; Stöppelmann, G.; Friedrich, C.; Kim, G.-M. . Rheology of nanocomposites based on layered silicates and polyamide-12 . Colloid. Polym. Sci. , 2000 . 278 629 - 636 . DOI: 10.1007/s003960000294 http://doi.org/10.1007/s003960000294 .

Okamba-Diogo, O.; Richaud, E.; Verdu, J.; Fernagut, F.; Guilment, J.; Fayolle, B. . Molecular and macromolecular structure changes in polyamide 11 during thermal oxidation . Polym. Degrad. Stab. , 2014 . 108 123 - 132 . DOI: 10.1016/j.polymdegradstab.2014.05.028 http://doi.org/10.1016/j.polymdegradstab.2014.05.028 .

Chen, Y.; Wei, W.; Himmel, T.; Wagner, M. H. . Structure and rheological behavior of thermoreversible supramolecular polymers with weak multiple hydrogen bonds . Macromol. Mater. Eng. , 2013 . 298 876 - 887 . DOI: 10.1002/mame.201200139 http://doi.org/10.1002/mame.201200139 .

Schuttenberg, H.; Schulz, R. C. . Trifluoroacetylation of amines with N-trifluoroacetyl-nylon 66 . Angew. Chem. Int. Ed. , 1976 . 15 777 - 778 . DOI: 10.1002/anie.197607771 http://doi.org/10.1002/anie.197607771 .

Ibar, J. P.; Zhang, Z.; Li, Z. M.; Santamaria, A. . Investigation of the dynamic rheological properties of a polycarbonate melt presenting solid-like characteristics and a departure from pure liquid newtonian behavior at long relaxation times . J. Macromol. Sci., Part B: Phys. , 2015 . 54 649 - 710 . DOI: 10.1080/00222348.2015.1029411 http://doi.org/10.1080/00222348.2015.1029411 .

浏览量

116

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Rheological Behaviors of a Series of Hyperbranched Polyethers

High-performance Vanillin-derived Dielectric Polymer Films for Sustainable Energy Storage

Swelling, Interfacial Behavior, and Rheology of Soft Core-Shell Microgels Introducing Acid Isomer for pH-Temperature Dual-responsiveness

Droplet Bridging Effect in Polymer/Polymer/Filler Ternary Composites

Advances in Polymer-based Circularly Polarized Luminescent Materials