A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites

Hossein Pourrahmani; Mona Golparvar; Mohammad Fasihi

doi:10.1007/s10118-020-2399-5

Your Location：

Home >

Browse articles >

A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites

ARTICLE | Updated：2020-04-15

- A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites
- A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites
- Chinese Journal of Polymer Science 2020年38卷第8期页码：877-887
- Affiliations：
  
  a.Group of Energy Materials, École Polytechnique Fédérale de Lausanne, Sion 1951, Switzerland
  b.School of Chemical, Petroleum and Gas Engineering, Iran University of Science and Technology, Tehran 16846-13114, Iran
  c.School of Mechanical Engineering, Braunschweig university of technology, Braunschweig 38106, Germany
- Author bio：
  
  mfasihi@iust.ac.ir
- Funds：
- DOI：10.1007/s10118-020-2399-5
  中图分类号：
- 收稿：2019-11-11，
  
  修回：2020-1-14，
  
  录用：2020-2-3，
  
  网络首发：2020-04-15，
  
  纸质出版：2020-08
- Accepted：
Scan QR Code
Pourrahmani, H.; Golparvar, M.; Fasihi, M. A new evaluation criterion for optimizing the mechanical properties of toughened polypropylene/silica nanocomposites. Chinese J. Polym. Sci. 2020, 38, 877–887

Hossein Pourrahmani, Mona Golparvar, Mohammad Fasihi. A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites[J]. Chinese Journal of Polymer Science, 2020, 38(8): 877-887.
Pourrahmani, H.; Golparvar, M.; Fasihi, M. A new evaluation criterion for optimizing the mechanical properties of toughened polypropylene/silica nanocomposites. Chinese J. Polym. Sci. 2020, 38, 877–887 DOI： 10.1007/s10118-020-2399-5.

Hossein Pourrahmani, Mona Golparvar, Mohammad Fasihi. A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites[J]. Chinese Journal of Polymer Science, 2020, 38(8): 877-887. DOI： 10.1007/s10118-020-2399-5.

摘要

Abstract

This study aims to experiment with the mechanical properties of polypropylene (PP)/thermoplastic elastomer/nano-silica/compatibilizer nanocomposite using the melt mixing method. The addition of polyolefin elastomers has proved to be an approachable solution for low impact strength of PP

while it would also reduce the Young′s modulus and tensile strength. That is why reinforcement would be applied to this combination to enhance the elastic modulus. The mechanical properties of the prepared composites were devised to train an artificial neural network to predict these properties of the system in 6256 unknown points. Therefore

the sensitivity analysis was performed and the share of each input parameter on the respective output values was calculated. Additionally

a novel parameter called nanocomposite evaluation criterion (NEC) is introduced to analyze the suitability of the nanocomposites considering the mechanical properties. Accordingly

the formulation with optimal mechanical properties of toughness

elongation at break

tensile strength

Young′s modulus

and impact strength was obtained.

关键词

Keywords

references

Maira, B.; Takeuchi, K.; Chammingkwan, P.; Terano, M.; Taniike, T. . Thermal conductivity of polypropylene/aluminum oxide nanocomposites prepared based on reactor granule technology . Compos. Sci. Technol. , 2018 . 165 259 - 265 . DOI: 10.1016/j.compscitech.2018.07.007 http://doi.org/10.1016/j.compscitech.2018.07.007 .

Xu, C.; Zheng, Z.; Wu, W.; Wang, Z.; Fu, L. . Dynamically vulcanized PP/EPDM blends with balanced stiffness and toughness via in-situ compatibilization of MAA and excess ZnO nanoparticles: preparation, structure and properties . Compos. Part B Eng. , 2019 . 160 147 - 157 . DOI: 10.1016/j.compositesb.2018.10.014 http://doi.org/10.1016/j.compositesb.2018.10.014 .

Aumnate, C.; Limpanart, S.; Soatthiyanon, N.; Khunton, S. . PP/organoclay nanocomposites for fused filament fabrication (FFF) 3D printing . Express Polym. Lett. , 2019 . 13 898 - 909 . DOI: 10.3144/expresspolymlett.2019.78 http://doi.org/10.3144/expresspolymlett.2019.78 .

Shonaike, G. O.; Matsuo, T. . Impregnation conditions on glass fiber reinforced thermoplastic polyster elastomer composites . J. Reinf. Plast. Compos. , 1996 . 15 16 - 29 . DOI: 10.1177/073168449601500102 http://doi.org/10.1177/073168449601500102 .

Shonaike, G. O.; Matsuo, T. . Experimental analysis of relation between shear coupling element and bias angle of carbon fiber reinforced polyether-polyester elastomer composites . J. Reinf. Plast. Compos. , 1997 . 16 217 - 225 . DOI: 10.1177/073168449701600302 http://doi.org/10.1177/073168449701600302 .

Lee, J. W.; Kwon, T.; Kang, Y.; Han, T. H.; Cho, C. G.; Hong, S. M.; Hwang, S. W.; Koo, C. M. . Styrenic block copolymer/sulfonated graphene oxide composite membranes for highly bendable ionic polymer actuators with large ion concentration gradient . Compos. Sci. Technol. , 2018 . 163 63 - 70 . DOI: 10.1016/j.compscitech.2018.05.002 http://doi.org/10.1016/j.compscitech.2018.05.002 .

Paran, S. M. R.; Abdorahimi, M.; Shekarabi, A.; Khonakdar, H. A.; Jafari, S. H.; Saeb, M. R. . Modeling and analysis of nonlinear elastoplastic behavior of compatibilized polyolefin/polyester/clay nanocomposites with emphasis on interfacial interaction exploration . Compos. Sci. Technol. , 2018 . 154 92 - 103 . DOI: 10.1016/j.compscitech.2017.11.018 http://doi.org/10.1016/j.compscitech.2017.11.018 .

Sun, W. J.; Xu, L.; Jia, L. C.; Zhou, C. G.; Xiang, Y.; Yin, R. H.; Yan, D. X.; Tang, J. H.; Li, Z. M. . Highly conductive and stretchable carbon nanotube/thermoplastic polyurethane composite for wearable heater . Compos. Sci. Technol. , 2019 . 181 107695 DOI: 10.1016/j.compscitech.2019.107695 http://doi.org/10.1016/j.compscitech.2019.107695 .

Huang, Z. M. . Characterization of knitted fabric reinforced elastomer composite . J. Reinf. Plast. Compos. , 1999 . 18 118 - 137 . DOI: 10.1177/073168449901800202 http://doi.org/10.1177/073168449901800202 .

Bajsić, E. G.; Šmit, I.; Leskovac M . Blends of thermoplastic polyurethane and polypropylene. I. Mechanical and phase behavior . J. Appl. Polym. Sci. , 2007 . 104 3980 - 3985 . DOI: 10.1002/app.26222 http://doi.org/10.1002/app.26222 .

Fasihi, M.; Mansouri, H. . Effect of rubber interparticle distance distribution on toughening behavior of thermoplastic polyolefin elastomer toughened polypropylene . J. Appl. Polym. Sci. , 2016 . 133 44068 .

Liang, J. Z. . Mechanical properties and morphology of polypropylene/poly(ethylene- co -octene) blends . J. Polym. Environ. , 2012 . 20 872 - 878 . DOI: 10.1007/s10924-012-0441-6 http://doi.org/10.1007/s10924-012-0441-6 .

Członka, S.; Strąkowska, A.; Strzelec, K.; Kairytė, A.; Vaitkus, S. . Composites of rigid polyurethane foams and silica powder filler enhanced with ionic liquid . Polym. Test. , 2019 . 75 12 - 25 . DOI: 10.1016/j.polymertesting.2019.01.021 http://doi.org/10.1016/j.polymertesting.2019.01.021 .

Sahraeian, R.; Davachi, S. M.; Heidari, B. S. . The effect of nanoperlite and its silane treatment on thermal properties and degradation of polypropylene/nanoperlite nanocomposite films . Compos. Part B Eng. , 2019 . 162 103 - 111 . DOI: 10.1016/j.compositesb.2018.10.093 http://doi.org/10.1016/j.compositesb.2018.10.093 .

Davachi, S. M.; Heidari, B. S.; Sahraeian, R.; Abbaspourrad, A. . The effect of nanoperlite and its silane treatment on the crystallinity, rheological, optical, and surface properties of polypropylene/nanoperlite nanocomposite films . Compos. Part B Eng. , 2019 . 175 107088 DOI: 10.1016/j.compositesb.2019.107088 http://doi.org/10.1016/j.compositesb.2019.107088 .

Parimalam, M.; Islam, M. R.; Yunus, R. M. . Effects of nanosilica, zinc oxide, titatinum oxide on the performance of epoxy hybrid nanocoating in presence of rubber latex . Polym. Test. , 2018 . 70 197 - 207 . DOI: 10.1016/j.polymertesting.2018.07.008 http://doi.org/10.1016/j.polymertesting.2018.07.008 .

Panaitescu, D. M.; Vuluga, Z.; Radovici, C.; Nicolae, C. . Morphological investigation of PP/nanosilica composites containing SEBS . Polym. Test. , 2012 . 31 355 - 365 . DOI: 10.1016/j.polymertesting.2011.12.010 http://doi.org/10.1016/j.polymertesting.2011.12.010 .

Lee, S. H.; Kontopoulou, M.; Park, C. B. . Effect of nanosilica on the co-continuous morphology of polypropylene/polyolefin elastomer blends . Polymer , 2010 . 51 1147 - 1155 . DOI: 10.1016/j.polymer.2010.01.018 http://doi.org/10.1016/j.polymer.2010.01.018 .

Liu, Y.; Kontopoulou, M. . The structure and physical properties of polypropylene and thermoplastic olefin nanocomposites containing nanosilica . Polymer , 2006 . 47 7731 - 7739 . DOI: 10.1016/j.polymer.2006.09.014 http://doi.org/10.1016/j.polymer.2006.09.014 .

Canto, L. B. . Aspects regarding the efficiency of nanosilica as an interfacial compatibilizer of a polypropylene/ethylene vinyl-acetate immiscible blend . Polym. Test. , 2019 . 73 135 - 142 . DOI: 10.1016/j.polymertesting.2018.11.012 http://doi.org/10.1016/j.polymertesting.2018.11.012 .

Liu, B.; Shangguan, Y.; Zheng, Q. . Toughening of ethylene-propylene random copolymer/clay nanocomposites: Comparison of different compatibilizers . Chinese J. Polym. Sci. , 2012 . 30 853 - 864 . DOI: 10.1007/s10118-012-1185-4 http://doi.org/10.1007/s10118-012-1185-4 .

Ma, G.; Zhai, J.; Liu, B.; Huang, D.; Sheng, J. . Plasma modification of polypropylene surfaces and grafting copolymerization of styrene onto polypropylene . Chinese J. Polym. Sci. , 2012 . 30 423 - 435 . DOI: 10.1007/s10118-012-1130-6 http://doi.org/10.1007/s10118-012-1130-6 .

Wang, L.; Jiang, Z.; Liu, F.; Zhang, Z.; Tang, T. . Effects of branches on the crystallization kinetics of polypropylene- g -polystyrene and polypropylene- g -poly( n -butyl acrylate) graft copolymers with well-defined molecular structures . Chinese J. Polym. Sci. , 2014 . 32 333 - 349 . DOI: 10.1007/s10118-014-1404-2 http://doi.org/10.1007/s10118-014-1404-2 .

Bikiaris, D. N.; Vassiliou, A.; Pavlidou, E.; Karayannidis, G. P. . Compatibilisation effect of PP- g -MA copolymer on i PP/SiO 2 nanocomposites prepared by melt mixing . Eur. Polym. J. , 2005 . 41 1965 - 1978 . DOI: 10.1016/j.eurpolymj.2005.03.008 http://doi.org/10.1016/j.eurpolymj.2005.03.008 .

Tessier, R.; Lafranche, E.; Krawczak, P. . Development of novel melt-compounded starch-grafted polypropylene/polypropylene-grafted maleic anhydride/organoclay ternary hybrids . Express Polym. Lett. , 2012 . 6 937 - 952 . DOI: 10.3144/expresspolymlett.2012.99 http://doi.org/10.3144/expresspolymlett.2012.99 .

Bezerra, E. M.; Bento, M. S.; Rocco, J. A. F. F.; Iha, K.; Lourenço. V. L.; Pardini, L. C. . Artificial neural network (ANN) prediction of kinetic parameters of (CRFC) composites . Comput. Mater. Sci. , 2008 . 44 656 - 663 . DOI: 10.1016/j.commatsci.2008.05.002 http://doi.org/10.1016/j.commatsci.2008.05.002 .

Seyhan, A. T.; Tayfur, G.; Karakurt, M.; Tanoğlu, M . Artificial neural network (ANN) prediction of compressive strength of VARTM processed polymer composites . Comput. Mater. Sci. , 2005 . 34 99 - 105 . DOI: 10.1016/j.commatsci.2004.11.001 http://doi.org/10.1016/j.commatsci.2004.11.001 .

Pourrahmani, H.; Moghimi, M.; Siavashi, M. . Thermal management in PEMFCs: the respective effects of porous media in the gas flow channel . Int. J. Hydrog. Energy , 2019 . 44 3121 - 3137 . DOI: 10.1016/j.ijhydene.2018.11.222 http://doi.org/10.1016/j.ijhydene.2018.11.222 .

Pourrahmani, H.; Moghimi, M.; Siavashi, M.; Shirbani, M. . Sensitivity analysis and performance evaluation of the PEMFC using wave-like porous ribs . Appl. Therm. Eng. , 2019 . 150 433 - 444 . DOI: 10.1016/j.applthermaleng.2019.01.010 http://doi.org/10.1016/j.applthermaleng.2019.01.010 .

Pourrahmani, H.; Siavashi, M.; Moghimi, M. . Design optimization and thermal management of the PEMFC using artificial neural networks . Energy , 2019 . 182 443 - 459 . DOI: 10.1016/j.energy.2019.06.019 http://doi.org/10.1016/j.energy.2019.06.019 .

Nazari, A.; Riahi, S. . Prediction split tensile strength and water permeability of high strength concrete containing TiO 2 nanoparticles by artificial neural network and genetic programming . Compos. Part B Eng. , 2011 . 42 473 - 488 . DOI: 10.1016/j.compositesb.2010.12.004 http://doi.org/10.1016/j.compositesb.2010.12.004 .

Câmara, E. C. B.; Freire, R. C. S. . Using neural networks to modeling the transverse elasticity modulus of unidirectional composites . Compos. Part B Eng. , 2011 . 42 2024 - 2029 . DOI: 10.1016/j.compositesb.2011.04.042 http://doi.org/10.1016/j.compositesb.2011.04.042 .

Liu, Q..; Li, H.; Yan, S . Structure and properties of β -polypropylene reinforced by polypropylene fiber and polyamide fiber . Chinese J. Polym. Sci. , 2014 . 32 509 - 518 . DOI: 10.1007/s10118-014-1417-x http://doi.org/10.1007/s10118-014-1417-x .

Zhu, H.; Du, M.; Xu, C.; Zhang, X.; Fu, Y. . Organic-inorganic hybrid network constructed in polypropylene matrix and its reinforcing effects on polypropylene composites . J. Reinf. Plast. Compos. , 2013 . 32 174 - 182 . DOI: 10.1177/0731684412467841 http://doi.org/10.1177/0731684412467841 .

Saleeb, A. F.; Wilt, T. E.; Al-Zoubi, N. R.; Gendy, A. S. . An anisotropic viscoelastoplastic model for composites—sensitivity analysis and parameter estimation . Compos. Part B Eng. , 2003 . 34 21 - 39 . DOI: 10.1016/S1359-8368(02)00078-1 http://doi.org/10.1016/S1359-8368(02)00078-1 .

浏览量

480

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

3D Printed Polyimide/Silica Composite Aerogels for Customizable Thermal Insulation from −50 °C to 1300 °C

Excellent Compatibilization Effect of a Dual Reactive Compatibilizer on the Immiscible MVQ/PP Blends

Modeling of the Tensile Strength of Immiscible Binary Polymer Blends Considering the Effects of Polymer/Polymer Interface and Morphological Variation

Rheological and Interfacial Properties of Colloidal Electrolytes

Sequence-encoded Conformation Pathways in Viscoelastic Microphase Separation of Multiblock Copolymers