Comparative Investigation on Step-cycle Tensile Behaviors of Two Bimodal Pipe-grade Polyethylene with Different Slow Crack Growth Resistance

Yan-Qin Huang; Qing-Long Zhang; Xiao-Ying Lu; Yi-Bin Gong; Hao Zhou; Jia-Chun Feng

doi:10.1007/s10118-020-2364-3

Your Location：

Home >

Browse articles >

Comparative Investigation on Step-cycle Tensile Behaviors of Two Bimodal Pipe-grade Polyethylene with Different Slow Crack Growth Resistance

ARTICLE | Updated：2019-12-05

- Comparative Investigation on Step-cycle Tensile Behaviors of Two Bimodal Pipe-grade Polyethylene with Different Slow Crack Growth Resistance
- Comparative Investigation on Step-cycle Tensile Behaviors of Two Bimodal Pipe-grade Polyethylene with Different Slow Crack Growth Resistance
- Chinese Journal of Polymer Science 2020年38卷第6期页码：611-619
- Affiliations：
  
  a.State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai 200433, China
  b.Laboratory for Synthetic Resin Research, PetroChina Petrochemical Research Institute, Beijing 100083, China
  c.Institute of Dushanzi Petrochemical Corporation, PetroChina Company Limited, Dushanzi 833699, China
- Author bio：
  
  jcfeng@fudan.edu.cn
- Funds：
  
  We gratefully acknowledge the financial support from the National Natural Science Foundation of China (Nos. 51773040 and 21574029) and PetroChina Company Limited, China. We also greatly thank for the beam time provided by Shanghai Synchrotron Radiation Facility.
- DOI：10.1007/s10118-020-2364-3
  中图分类号： M
- 收稿：2019-08-14，
  
  修回：2019-9-17，
  
  录用：2019-10-17，
  
  网络首发：2019-12-05，
  
  纸质出版：2020-06
- Accepted：
Scan QR Code
Huang, Y. Q.; Zhang, Q. L.; Lu, X. Y.; Gong, Y. B.; Zhou, H.; Feng, J. C. Comparative investigation on step-cycle tensile behaviors of two bimodal pipe-grade polyethylene with different slow crack growth resistance. Chinese J. Polym. Sci. 2020, 38, 611–619

Yan-Qin Huang, Qing-Long Zhang, Xiao-Ying Lu, et al. Comparative Investigation on Step-cycle Tensile Behaviors of Two Bimodal Pipe-grade Polyethylene with Different Slow Crack Growth Resistance[J]. Chinese Journal of Polymer Science, 2020, 38(6): 611-619.
Huang, Y. Q.; Zhang, Q. L.; Lu, X. Y.; Gong, Y. B.; Zhou, H.; Feng, J. C. Comparative investigation on step-cycle tensile behaviors of two bimodal pipe-grade polyethylene with different slow crack growth resistance. Chinese J. Polym. Sci. 2020, 38, 611–619 DOI： 10.1007/s10118-020-2364-3.

Yan-Qin Huang, Qing-Long Zhang, Xiao-Ying Lu, et al. Comparative Investigation on Step-cycle Tensile Behaviors of Two Bimodal Pipe-grade Polyethylene with Different Slow Crack Growth Resistance[J]. Chinese Journal of Polymer Science, 2020, 38(6): 611-619. DOI： 10.1007/s10118-020-2364-3.

摘要

Abstract

In this work

step-cycle tensile behavior of two bimodal polyethylene (PE) materials

a PE100 grade pipe material

XS10

and a PE100-RC (Resistant Crack) grade pipe material

XSC50

was comparatively investigated. By decomposing the strain into a recoverable part and an unrecoverable part

it was found that the deformation recovery capability of XSC50 during stretching was larger than that of XS10. Structural evolution characterized by

in situ

synchrotron small angle X-ray scattering indicated that the fragmentation of initial crystals in XSC50 occurred at lower strain than in XS10. Considering that XSC50 had relatively small lamellar thickness and similar crystallinity to XS10

we speculated that the larger deformation recovery capability of XSC50 during stretching probably derived from stronger entangled amorphous region caused by larger density of tie molecules and entanglements

which were usually regarded to have a significant influence on the slow crack growth (SCG) resistance of PE materials. As expected

the experimental result of strain hardening modulus test suggested that the deformation recovery capability during stretching was positively correlated with the SCG resistance for XS10 and XSC50 used in this work. The step-cycle tensile test had the potential to be developed into a supplement for comparison of SCG resistance of PE materials.

关键词

Keywords

references

Institute, P. P., in Handbook of polyethylene pipe , Plastics Pipe Institute: Irving, Texas, 2007 .

Peacock, A., in Handbook of polyethylene : structures , properties , and applications , CRC Press, 2000 .

Wu, T.; Yu, L.; Cao, Y.; Yang, F.; Xiang, M. . Effect of molecular weight distribution on rheological, crystallization and mechanical properties of polyethylene-100 pipe resins . J. Polym. Res. , 2013 . 20 271 DOI: 10.1007/s10965-013-0271-9 http://doi.org/10.1007/s10965-013-0271-9 .

ISO 12162: 2009, Thermoplastics materials for pipes and fittings for pressure applications—classification, designation and design coefficient.

ISO 9080: 2012, Plastics piping and ducting systems—determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.

Arbeiter, F.; Austria, L.; Pinter, G. Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (CRB) test in correlation to strain hardening (SH) test. In ANTEC , Society of Plastics Engineers Incorporated ( SPE ): Anaheim , 2017 , Vol. 37.

Pinter, G.; Haager, M.; Balika, W.; Lang, R. W. . Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades . Polym. Test. , 2007 . 26 180 - 188 . DOI: 10.1016/j.polymertesting.2006.09.010 http://doi.org/10.1016/j.polymertesting.2006.09.010 .

Kratochvilla, T. R.; Frank, A.; Pinter, G. . Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test . Polym. Test. , 2014 . 40 299 - 303 . DOI: 10.1016/j.polymertesting.2014.10.002 http://doi.org/10.1016/j.polymertesting.2014.10.002 .

Shen, H.; Xie, B.; Yang, W.; Yang, M. . Non-isothermal crystallization of polyethylene blends with bimodal molecular weight distribution . Polym. Test. , 2013 . 32 1385 - 1391 . DOI: 10.1016/j.polymertesting.2013.09.002 http://doi.org/10.1016/j.polymertesting.2013.09.002 .

Alt, F. P.; Böhm, L. L.; Enderle, H. F.; Berthold, J. . Bimodal polyethylene–interplay of catalyst and process . Macromol. Symp. , 2001 . 163 135 - 144 . DOI: 10.1002/1521-3900(200101)163:1<135::AID-MASY135>3.0.CO;2-7 http://doi.org/10.1002/1521-3900(200101)163:1<135::AID-MASY135>3.0.CO;2-7 .

Strobl, G. R., in The physics of polymers . Springer-Verlag Berlin Heidelberg, 2007 .

Fan, Y.; Xue, Y.; Nie, W.; Ji, X.; Bo, S. . Characterization of the microstructure of bimodal HDPE resin . Polym. J. , 2009 . 41 622 - 628 . DOI: 10.1295/polymj.PJ2009030 http://doi.org/10.1295/polymj.PJ2009030 .

Pan, Y.; Gao, X.; Wang, Z.; Lei, J.; Li, Z.; Shen, K. . Effect of different morphologies on slow crack growth of high-density polyethylene . RSC Adv. , 2015 . 5 28191 - 28202 . DOI: 10.1039/C5RA00918A http://doi.org/10.1039/C5RA00918A .

DesLauriers, P. J.; Rohlfing, D. C. . Estimating slow crack growth performance of polyethylene resins from primary structures such as molecular weight and short chain branching . Macromol. Symp. , 2009 . 282 136 - 149 . DOI: 10.1002/masy.200950814 http://doi.org/10.1002/masy.200950814 .

Lustiger, A.; Corneliussen, R. . The role of crazes in the crack growth of polyethylene . J. Mater. Sci. , 1987 . 22 2470 - 2476 . DOI: 10.1007/BF01082132 http://doi.org/10.1007/BF01082132 .

Narisawa, I.; Yee, A., in Crazing and fracture of polymers . Wiley Online Library, 2006 .

Bhattacharya, S. K.; Brown, N. . Micromechanisms of crack initiation in thin films and thick sections of polyethylene . J. Mater. Sci. , 1984 . 19 2519 - 2532 . DOI: 10.1007/BF00550806 http://doi.org/10.1007/BF00550806 .

Fawaz, J.; Deveci, S.; Mittal, V. . Molecular and morphological studies to understand slow crack growth (SCG) of polyethylene . Colloid Polym. Sci. , 2016 . 294 1269 - 1280 . DOI: 10.1007/s00396-016-3888-5 http://doi.org/10.1007/s00396-016-3888-5 .

Hiss, R.; Hobeika, S.; Lynn, C.; Strobl, G. . Network stretching, slip processes, and fragmentation of crystallites during uniaxial drawing of polyethylene and related copolymers a comparative study . Macromolecules , 1999 . 32 4390 - 4403 . .

Brömstrup, H. in PE100 pipe systems . Vulkan-Verlag GmbH, 2004 .

ÖVGW QS-G 392/2: 2013, Polyethylene piping systems PE80, PE100 and PE100-RC for the supply of gaseous fuels, Part 2: pipes.

ÖVGW/GRIS PW 405/1: 2012, Polyethylene PE100-RC pipe systems for alternative installation techniques for the supply of drinking water.

O'Connell, P. A.; Bonner, M. J.; Duckett, R. A.; Ward, I. M. . The relationship between slow crack propagation and tensile creep behaviour in polyethylene . Polymer , 1995 . 36 2355 - 2362 . DOI: 10.1016/0032-3861(95)97333-B http://doi.org/10.1016/0032-3861(95)97333-B .

Cawood, M.; Channell, A.; Capaccio, G. . Crack initiation and fibre creep in polyethylene . Polymer , 1993 . 34 423 - 425 . DOI: 10.1016/0032-3861(93)90100-O http://doi.org/10.1016/0032-3861(93)90100-O .

Rose, L. J.; Channell, A. D.; Frye, C. J.; Capaccio, G. . Slow crack growth in polyethylene: a novel predictive model based on the creep of craze fibrils . J. Appl. Polym. Sci. , 1994 . 54 2119 - 2124 . DOI: 10.1002/app.1994.070541314 http://doi.org/10.1002/app.1994.070541314 .

Kurelec, L.; Teeuwen, M.; Schoffeleers, H.; Deblieck, R. . Strain hardening modulus as a measure of environmental stress crack resistance of high density polyethylene . Polymer , 2005 . 46 6369 - 6379 . DOI: 10.1016/j.polymer.2005.05.061 http://doi.org/10.1016/j.polymer.2005.05.061 .

Capaccio, G. . Structural changes in the preparation of ultra-high modulus polyethylene . Pure Appl. Chem. , 1983 . 55 869 - 872 . DOI: 10.1351/pac198355050869 http://doi.org/10.1351/pac198355050869 .

Brown, N.; Lu, X. . A fundamental theory for slow crack growth in polyethylene . Polymer , 1995 . 36 543 - 548 . DOI: 10.1016/0032-3861(95)91563-M http://doi.org/10.1016/0032-3861(95)91563-M .

Lu, X.; Mcghie, A.; Brown, N. . The dependence of slow crack growth in a polyethylene copolymer on test temperature and morphology . J. Polym. Sci., Part B: Polym. Phys. , 1992 . 30 1207 - 1214 . DOI: 10.1002/polb.1992.090301105 http://doi.org/10.1002/polb.1992.090301105 .

Brown, N.; Ward, I. M. . The influence of morphology and molecular weight on ductile-brittle transitions in linear polyethylene . J. Mater. Sci. , 1983 . 18 1405 - 1420 . DOI: 10.1007/BF01111960 http://doi.org/10.1007/BF01111960 .

Deveci, S.; Fang, D. . Correlation of molecular parameters, strain hardening modulus and cyclic fatigue test performances of polyethylene materials for pressure pipe applications . Polym. Test. , 2017 . 62 246 - 253 . DOI: 10.1016/j.polymertesting.2017.07.007 http://doi.org/10.1016/j.polymertesting.2017.07.007 .

He, X.; Zha, X.; Zhu, X.; Qi, X.; Liu, B. . Effect of short chain branches distribution on fracture behavior of polyethylene pipe resins . Polym. Test. , 2018 . 68 219 - 228 . DOI: 10.1016/j.polymertesting.2018.04.017 http://doi.org/10.1016/j.polymertesting.2018.04.017 .

ISO 18488: 2015, Polyethylene (PE) materials for piping systems—determination of strain hardening modulus in relation to slow crack growth—test method.

Cheng, J. J.; Polak, M. A.; Penlidis, A. . Polymer network mobility and environmental stress cracking resistance of high density polyethylene . Polym. Plast. Technol. , 2009 . 48 1252 - 1261 . DOI: 10.1080/03602550903159085 http://doi.org/10.1080/03602550903159085 .

Hong, K.; Rastogi, A.; Strobl, G. . A model treating tensile deformation of semicrystalline polymers: quasi-static stress-strain relationship and viscous stress determined for a sample of polyethylene . Macromolecules , 2004 . 37 10165 - 10173 . DOI: 10.1021/ma049174h http://doi.org/10.1021/ma049174h .

Men, Y.; Rieger, J.; Strobl, G. . Role of the entangled amorphous network in tensile deformation of semicrystalline polymers . Phys. Rev. Lett. , 2003 . 91 095502 DOI: 10.1103/PhysRevLett.91.095502 http://doi.org/10.1103/PhysRevLett.91.095502 .

Jiang, Z.; Tang, Y.; Rieger, J.; Enderle, H. F.; Lilge, D.; Roth, S. V.; Gehrke, R.; Heckmann, W.; Men, Y. . Two lamellar to fibrillar transitions in the tensile deformation of high-density polyethylene . Macromolecules , 2010 . 43 4727 - 4732 . DOI: 10.1021/ma100303d http://doi.org/10.1021/ma100303d .

Sun, Y.; Fu, L.; Wu, Z.; Men, Y. . Structural evolution of ethylene-octene copolymers upon stretching and unloading . Macromolecules , 2013 . 46 971 - 976 . DOI: 10.1021/ma3020933 http://doi.org/10.1021/ma3020933 .

Kida, T.; Oku, T.; Hiejima, Y.; Nitta, K. H. . Deformation mechanism of high-density polyethylene probed by in situ Raman spectroscopy . Polymer , 2015 . 58 88 - 95 . DOI: 10.1016/j.polymer.2014.12.030 http://doi.org/10.1016/j.polymer.2014.12.030 .

Seger, M. R.; Maciel, G. E. . Quantitative 13 C NMR analysis of sequence distributions in poly(ethylene- co -1-hexene) . Anal. Chem. , 2004 . 76 5734 - 5747 . DOI: 10.1021/ac040104i http://doi.org/10.1021/ac040104i .

Nitta, K. H.; Tanaka, A. . Dynamic mechanical properties of metallocene catalyzed linear polyethylenes . Polymer , 2001 . 42 1219 - 1226 . DOI: 10.1016/S0032-3861(00)00418-3 http://doi.org/10.1016/S0032-3861(00)00418-3 .

Nakayasu, H.; Markovitz, H.; Plazek, D. . The frequency and temperature dependence of the dynamic mechanical properties of a high density polyethylene . T. Soc. Rheol. , 1961 . 5 261 - 283 . DOI: 10.1122/1.548899 http://doi.org/10.1122/1.548899 .

Kajiyama, T.; Okada, T.; Sakoda, A.; Takayanagi, M. . Analysis of the α -relaxation process of bulk crystallized polyethylene based on that of single crystal mat . J. Macromol. Sci. B , 1973 . 7 583 - 608 . DOI: 10.1080/00222347308207887 http://doi.org/10.1080/00222347308207887 .

Müller, A. J.; Arnal, M. L. . Thermal fractionation of polymers . Prog. Polym. Sci. , 2005 . 30 559 - 603 . DOI: 10.1016/j.progpolymsci.2005.03.001 http://doi.org/10.1016/j.progpolymsci.2005.03.001 .

Jiang, Z.; Tang, Y.; Men, Y.; Enderle, H. F.; Lilge, D.; Roth, S. V.; Gehrke, R.; Rieger, J. . Structural evolution of tensile-deformed high-density polyethylene during annealing: scanning synchrotron small-angle X-ray scattering study . Macromolecules , 2007 . 40 7263 - 7269 . DOI: 10.1021/ma0627572 http://doi.org/10.1021/ma0627572 .

Jiang, Z.; Tang, Y.; Rieger, J.; Enderle, H. F.; Lilge, D.; Roth, S. V.; Gehrke, R.; Wu, Z.; Li, Z.; Men, Y. . Structural evolution of tensile deformed high-density polyethylene at elevated temperatures: Scanning synchrotron small- and wide-angle X-ray scattering studies . Polymer , 2009 . 50 4101 - 4111 . DOI: 10.1016/j.polymer.2009.06.063 http://doi.org/10.1016/j.polymer.2009.06.063 .

Beech, S.; Clutton, E. . Interpretation of results of full notch creep test and comparison with notched pipe test . Plast. Rubber Compos. , 2005 . 34 294 - 300 . DOI: 10.1179/174328905X59791 http://doi.org/10.1179/174328905X59791 .

ISO 13479: 2009, Polyolefin pipes for the conveyance of fluids—determination of resistance to crack propagation—test method for slow crack growth on notched pipes.

ISO 16241: 2005, Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT).

ISO 16770: 2004, Plastics—determination of environmental stress cracking (ESC) of polyethylene—full-notch creep test (FNCT).

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Modulating Molecular Weight of Polyethylenes from Oligomer to Polymer Using Highly Thermal Stable Cationic α-Diimine Palladium Complexes

Alkyl Alcohol Chain-length Mediated Steric Hindrance at Support Surface in Heterogeneous α-Diimine Ni Catalysts for Modulating Ethylene Polymerization

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation