Modeling of the Tensile Strength of Immiscible Binary Polymer Blends Considering the Effects of Polymer/Polymer Interface and Morphological Variation

Esmail Sharifzadeh

doi:10.1007/s10118-019-2274-4

Your Location：

Home >

Browse articles >

Modeling of the Tensile Strength of Immiscible Binary Polymer Blends Considering the Effects of Polymer/Polymer Interface and Morphological Variation

ARTICLE | Updated：2021-02-18

- Modeling of the Tensile Strength of Immiscible Binary Polymer Blends Considering the Effects of Polymer/Polymer Interface and Morphological Variation
- Modeling of the Tensile Strength of Immiscible Binary Polymer Blends Considering the Effects of Polymer/Polymer Interface and Morphological Variation
- Chinese Journal of Polymer Science 2019年37卷第11期页码：1176-1182
- Affiliations：
  
  Polymer Research Center, Faculty of Petroleum and Chemical Engineering, Razi University, Kermanshah, Iran
- Author bio：
  
  E_sharifzadeh@sut.ac.ir
- Funds：
- DOI：10.1007/s10118-019-2274-4
  中图分类号：
- 收稿：2019-03-05，
  
  修回：2019-4-10，
  
  录用：2019-4-11，
  
  网络首发：2019-06-04，
  
  纸质出版：2019-11
- Accepted：
Scan QR Code
Sharifzadeh, E. Modeling of the tensile strength of immiscible binary polymer blends considering the effects of polymer/polymer interface and morphological variation. Chinese J. Polym. Sci. 2019, 37, 1176–1182.

Esmail Sharifzadeh. Modeling of the Tensile Strength of Immiscible Binary Polymer Blends Considering the Effects of Polymer/Polymer Interface and Morphological Variation[J]. Chinese Journal of Polymer Science, 2019, 37(11): 1176-1182.
Sharifzadeh, E. Modeling of the tensile strength of immiscible binary polymer blends considering the effects of polymer/polymer interface and morphological variation. Chinese J. Polym. Sci. 2019, 37, 1176–1182. DOI： 10.1007/s10118-019-2274-4.

Esmail Sharifzadeh. Modeling of the Tensile Strength of Immiscible Binary Polymer Blends Considering the Effects of Polymer/Polymer Interface and Morphological Variation[J]. Chinese Journal of Polymer Science, 2019, 37(11): 1176-1182. DOI： 10.1007/s10118-019-2274-4.

摘要

Abstract

In this work

a unique model is proposed for predicting the tensile strength of binary polymer blends considering the effects of polymer/polymer interface and the morphological variation of the system. The modeling was performed based on the combination of analytical and artificial neural network (ANN) modeling methods. For the analytical part

Kolarik’s model was developed in accordance with the system requirements and ANN was simultaneously involved in order to interpret some effective model parameters using the tensile test result of an actual sample (

e.g.

the yield strength and thickness of the interface

etc

.). Furthermore

the model accuracy was evaluated by comparing the tensile test results of differently prepared

PP/PA and PS/PMMA blend samples and also some other data from literature with the model predictions. It was revealed that the designed ANN perfectly elevates the capability of the analytical section in order to predict the tensile strength of binary polymer blends with different compositions (prediction error

10%).

关键词

Keywords

references

Gomari, S.; Ghasemi, I.; Karrabi, M.; Azizi, H . Organoclay localization in polyamide 6/ethylene-butene copolymer grafted maleic anhydride blends: The effect of different types of organoclay . J. Polym. Res. , 2011 . 19 9769 .

Fathi, A.; Lee, S.; Breen, A.; Shirazi, A. N.; Valtchev, P.; Dehghani, F . Enhancing the mechanical properties and physical stability of biomimetic polymer hydrogels for micro-patterning and tissue engineering applications . Eur. Polym. J. , 2014 . 59 161 - 170 . DOI: 10.1016/j.eurpolymj.2014.07.011 http://doi.org/10.1016/j.eurpolymj.2014.07.011 .

Robeson, L. M. Polymer blends : A comprehensive review . Hanser, 2007 .

Ezzati, P.; Ghasemi, I.; Karrabi, M.; Azizi, H.; Fortelny, I . Preparation of porous PLLA/PCL blend by a combination of PEO phase and NaCl particulate leaching in PLLA/PCL/PEO/NaCl blend . Iran Polym. J. , 2014 . 23 757 - 766 . DOI: 10.1007/s13726-014-0270-7 http://doi.org/10.1007/s13726-014-0270-7 .

Sharifzadeh, E . Modeling of the mechanical properties of blend based polymer nanocomposites considering the effects of janus nanoparticles on polymer/polymer interface . Chinese J. Polym. Sci. , 2019 . 37 164 - 177 . DOI: 10.1007/s10118-019-2178-3 http://doi.org/10.1007/s10118-019-2178-3 .

Minaei-Zaim, M.; Ghasemi, I.; Karrabi, M.; Azizi, H . Effect of injection molding parameters on properties of cross-linked low-density polyethylene/ethylene vinyl acetate/organoclay nanocomposite foams . Iran Polym. J. , 2012 . 21 537 - 546 . DOI: 10.1007/s13726-012-0059-5 http://doi.org/10.1007/s13726-012-0059-5 .

Shonaike, G. O.; Simon, G. P. Polymer Blends and Alloys . Taylor & amp; Francis, 1999 .

Dasari, A.; Yu, Z. Z.; Mai, Y. W. Polymer nanocomposites: Towards multi-functionality. Springer London, 2016 .

Gupta, R. K.; Kennel, E.; Kim, K. J. Polymer nanocomposites handbook . CRC Press, 2009 .

Utracki, L. A. Commercial polymer blends . Springer US, 2013 .

Sharifzadeh, E.; Salami-Kalajahi, M.; Hosseini, M. S.; Aghjeh, M. K. R . Synthesis of silica Janus nanoparticles by buoyancy effect-induced desymmetrization process and their placement at the PS/PMMA interface . Colloid. Polym. Sci. , 2017 . 295 25 - 36 . DOI: 10.1007/s00396-016-3977-5 http://doi.org/10.1007/s00396-016-3977-5 .

Chen, S.; Sarafbidabad, M.; Zare, Y.; Rhee, K. Y . Estimation of the tensile modulus of polymer carbon nanotube nanocomposites containing filler networks and interphase regions by development of the Kolarik model . RSC Adv. , 2018 . 8 23825 - 23834 . DOI: 10.1039/C8RA01910J http://doi.org/10.1039/C8RA01910J .

Zare, Y . A Two-step method based on micromechanical models to predict the Young’s modulus of polymer nanocomposites . Macromol. Mater. Eng. , 2016 . 301 846 - 852 . DOI: 10.1002/mame.v301.7 http://doi.org/10.1002/mame.v301.7 .

Zare, Y.; Rhee, K. Y . Development of a model for electrical conductivity of polymer/graphene nanocomposites assuming interphase and tunneling regions in conductive networks . Ind. Eng. Chem. Res. , 2017 . 56 9107 - 9115 . DOI: 10.1021/acs.iecr.7b01348 http://doi.org/10.1021/acs.iecr.7b01348 .

Sharifzadeh, E.; Ghasemi, I.; Karrabi, M.; Azizi, H . A new approach in modeling of mechanical properties of binary phase polymeric blends . Iran Polym. J. , 2014 . 23 525 - 530 . DOI: 10.1007/s13726-014-0247-6 http://doi.org/10.1007/s13726-014-0247-6 .

Kolařík, J . Three-dimensional models for predicting the modulus and yield strength of polymer blends, foams, and particulate composites . Polym. Compos. , 1997 . 18 433 - 441 . DOI: 10.1002/(ISSN)1548-0569 http://doi.org/10.1002/(ISSN)1548-0569 .

Sharifzadeh, E.; Ghasemi, I.; Safajou-Jahankhanemlou, M . Modulus prediction of binary phase polymeric blends using symmetrical approximation systems as a new approach . Iran Polym. J. , 2015 . 24 735 - 746 . DOI: 10.1007/s13726-015-0362-z http://doi.org/10.1007/s13726-015-0362-z .

Ji, X. L.; Jing, J. K.; Jiang, W.; Jiang, B. Z . Tensile modulus of polymer nanocomposites . Polym. Eng. Sci. , 2002 . 42 983 - 993 . DOI: 10.1002/(ISSN)1548-2634 http://doi.org/10.1002/(ISSN)1548-2634 .

Kolarik, J . Simultaneous prediction of the modulus and yield strength of binary polymer blends . Polym. Eng. Sci. , 1996 . 36 2518 - 2524 . DOI: 10.1002/(ISSN)1548-2634 http://doi.org/10.1002/(ISSN)1548-2634 .

Wang, J. F.; Carson, J. K.; North, M. F.; Cleland, D. J . A knotted and interconnected skeleton structural model for predicting Young’s modulus of binary phase polymer blends . Polym. Eng. Sci. , 2010 . 50 643 - 651 . DOI: 10.1002/pen.21592 http://doi.org/10.1002/pen.21592 .

Sharifzadeh, E.; Ghasemi, I.; Qarebagh, A. N . Modeling of blend-based polymer nanocomposites using a knotted approximation of Young’s modulus . Iran Polym. J. , 2015 . 24 1039 - 1047 . DOI: 10.1007/s13726-015-0391-7 http://doi.org/10.1007/s13726-015-0391-7 .

Werner, A.; Schmid, F.; Müller, M.; Binder, K. In Interfaces in immiscible polymer blends: A Monte Carlo simulation approach on the CRAY T3E , Berlin, Heidelberg, Springer Berlin Heidelberg: Berlin, Heidelberg, 1999 , pp. 176−185.

Kar, G. P.; Biswas, S.; Bose, S . Tailoring the interface of an immiscible polymer blend by a mutually miscible homopolymer grafted onto graphene oxide: Outstanding mechanical properties . Phys. Chem. Chem. Phys. , 2015 . 17 1811 - 1821 . DOI: 10.1039/C4CP04481A http://doi.org/10.1039/C4CP04481A .

Oslanec, R.; Brown, H. R . Entanglement density at the interface between two immiscible polymers . Macromolecules , 2003 . 36 5839 - 5844 . DOI: 10.1021/ma021044q http://doi.org/10.1021/ma021044q .

Li, J.; Ma, P. L.; Favis, B. D . The role of the blend interface type on morphology in cocontinuous polymer blends . Macromolecules , 2002 . 35 2005 - 2016 . DOI: 10.1021/ma010104+ http://doi.org/10.1021/ma010104+ .

Pukánszky, B.; Tüdõs, F . Miscibility and mechanical properties of polymer blends . Macromolecular Symposia , 1990 . 38 221 - 231 . DOI: 10.1002/(ISSN)1521-3900a http://doi.org/10.1002/(ISSN)1521-3900a .

Yousef, B. F.; Mourad, A. H. I.; Hilal-Alnaqbi, A . Prediction of the mechanical properties of PE/PP blends using artificial neural networks . Procedia Eng. , 2011 . 10 2713 - 2718 . DOI: 10.1016/j.proeng.2011.04.452 http://doi.org/10.1016/j.proeng.2011.04.452 .

Yousef, B. F.; Mourad, A. H. I.; Hilal-Alnaqbi, A . Modeling of the mechanical behavior of polyethylene/polypropylene blends using artificial neural networks . Int. J. Adv. Manuf. Technol. , 2013 . 64 601 - 611 . DOI: 10.1007/s00170-012-4069-4 http://doi.org/10.1007/s00170-012-4069-4 .

Balasubramanian, M.; Paglicawan, M. A.; Zhang, Z. X.; Lee, S. H.; Xin, Z. X.; Kim, J. K . Prediction and optimization of mechanical properties of polypropylene/waste tire powder blends using a hybrid artificial neural network-genetic algorithm (GA-ANN) . J. Thermoplast. Compos. Mater. , 2008 . 21 51 - 69 . DOI: 10.1177/0892705707084543 http://doi.org/10.1177/0892705707084543 .

Roy, N. K.; Potter, W. D.; Landau, D. P . Designing polymer blends using neural networks, genetic algorithms, and markov chains . Appl. Intell. , 2004 . 20 215 - 229 . DOI: 10.1023/B:APIN.0000021414.50728.34 http://doi.org/10.1023/B:APIN.0000021414.50728.34 .

Werner, A.; Schmid, F.; Müller, M.; Binder, K. In Interfaces in immiscible polymer blends: A Monte Carlo simulation approach on the CRAY T3E , High performance computing in science and engineering ′98, Krause, E.; Jäger, W., Eds. Springer Berlin Heidelberg, Berlin, Heidelberg, 1999 , pp. 176−185.

Dong, B.; Guo, R.; Yan, L. T . Coassembly of janus nanoparticles in asymmetric diblock copolymer scaffolds: Unconventional entropy effect and role of interfacial topology . Macromolecules , 2014 . 47 4369 - 4379 . DOI: 10.1021/ma500161j http://doi.org/10.1021/ma500161j .

Chen, P.; Yang, Y.; Dong, B.; Huang, Z.; Zhu, G.; Cao, Y.; Yan, L. T . Polymerization-induced interfacial self-assembly of Janus nanoparticles in block copolymers: Reaction-mediated entropy effects, diffusion dynamics, and tailorable micromechanical behaviors . Macromolecules , 2017 . 50 2078 - 2091 . DOI: 10.1021/acs.macromol.7b00012 http://doi.org/10.1021/acs.macromol.7b00012 .

Teh, J. W . Structure and properties of polyethylene-polypropylene blend . J. Appl. Polym. Sci. , 1983 . 28 605 - 618 . DOI: 10.1002/app.1983.070280216 http://doi.org/10.1002/app.1983.070280216 .

Bataille, P.; Boissé, S.; Schreiber, H. P . Mechanical properties and permeability of polypropylene and poly(ethylene terephthalate) mixtures . Polym. Eng. Sci. , 1987 . 27 622 - 626 . DOI: 10.1002/pen.v27:9 http://doi.org/10.1002/pen.v27:9 .

Menyhárd, A.; Varga, J.; Liber, Á.; Belina, G . Polymer blends based on the β -modification of polypropylene . Eur. Polym. J. , 2005 . 41 669 - 677 . DOI: 10.1016/j.eurpolymj.2004.10.036 http://doi.org/10.1016/j.eurpolymj.2004.10.036 .

Bartczak, Z.; Galeski, A. Mechanical properties of polymer blends. In Polymer Blends Handbook , Utracki, L. A.; Wilkie, C. A., Eds. Springer Netherlands, Dordrecht, 2014 , pp. 1203−1297.

Utracki, L. A.; Wilkie, C. A. Polymer blends handbook . Springer Netherlands, 2014 .

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Inorganic Thermoplastic Flame Retardant as a Basic Component of Low-combustible Polymer Blends

A Unified Approach to Phase Equilibria in Multi-component Polymer Systems with Effective Chemical Potential

Compatibilizer-aided Fabrication of a 'High-entropy Polymer Blend'

Super Tough Hydrogels with Self-adaptive Network Facilitated by Liquid Metal

On-demand Peelable UV-curable Adhesives with Superior Bonding Strength: Rational Molecular Engineering of Cohesion-adhesion Synergy