Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers

Lu Chen; Kuan Hu; Si-Ting Sun; Hai Jiang; Dong Huang; Kun-Yu Zhang; Li Pan; Yue-Sheng Li

doi:10.1007/s10118-018-2143-6

Your Location：

Home >

Browse articles >

Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers

ARTICLE | Updated：2021-02-18

- Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers
- Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers
- Chinese Journal of Polymer Science 2018年36卷第12期页码：1342-1352
- Affiliations：
  
  a.Tianjin Key Laboratory of Composite and Functional Materials, School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China
  b.School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, China
  c.Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin 300072, China
- Author bio：
  
  kyzhang@tju.edu.cn (K.Y.Z.)
  ysli@tju.edu.cn (Y.S.L.)
- Funds：
  
  The authors are grateful for financial support by the National Natural Science Foundation of China (No. 51573130).
- DOI：10.1007/s10118-018-2143-6
  中图分类号：
- 收稿：2018-03-27，
  
  修回：2018-4-11，
  
  录用：2018-4-17，
  
  网络首发：2018-05-11，
  
  纸质出版：2018-12
- Accepted：
Scan QR Code
Citation: Chen, L.; Hu, K.; Sun, S. T.; Jiang, H.; Huang, D.; Zhang, K. Y.; Pan, L.; Li, Y. S. Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers. Chinese J. Polym. Sci. 2018, 36(12), 1342–1352

Lu Chen, Kuan Hu, Si-Ting Sun, et al. Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers[J]. Chinese Journal of Polymer Science, 2018, 36(12): 1342-1352.
Citation: Chen, L.; Hu, K.; Sun, S. T.; Jiang, H.; Huang, D.; Zhang, K. Y.; Pan, L.; Li, Y. S. Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers. Chinese J. Polym. Sci. 2018, 36(12), 1342–1352 DOI： 10.1007/s10118-018-2143-6.

Lu Chen, Kuan Hu, Si-Ting Sun, et al. Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers[J]. Chinese Journal of Polymer Science, 2018, 36(12): 1342-1352. DOI： 10.1007/s10118-018-2143-6.

摘要

Abstract

Imidazolium-based elastomeric ionomers (

-BIIR) were facilely synthesized by ionically modified brominated poly(isobutylene-

-isoprene) (BIIR) with different alkyl chain imidazole and thoroughly explored as novel toughening agents for poly(lactic acid) (PLA). The miscibility

thermal behavior

phase morphology and mechanical property of ionomers and blends were investigated through dynamic mechanical analyses (DMA)

differential scanning calorimetry (DSC)

scanning electron microscopy (SEM)

tensile and impact testing. DMA and SEM results showed that better compatibility between the PLA and

-BIIR was achieved compared to the PLA/unmodified BIIR elastomer. A remarkable improvement in ductility with an optimum elongation at break up to 235% was achieved for the PLA/

-BIIR blends with 1-dodecylimidazole alkyl chain (

-BIIR-12)

more than 10 times higher than that of pure PLA. The impact strengths of PLA were enhanced from 1.9 kJ/m

to 4.1 kJ/m

for the PLA/10 wt%

-BIIR-12 blend. Toughening mechanism had been established by systematical analysis of the compatibility

intermolecular interaction and phase structures of the blends. Interfacial cavitations initiated massive shear yielding of the PLA matrix owing to a suitable interfacial adhesion which played a key role in the enormous toughening effect in these blends. We believed that introducing imidazolium group into the BIIR elastomer was vital for the formation of a suitable interfacial adhesion.

关键词

Keywords

references

Chen, G. Q.; Patel, M. K . Plastics derived from biological sources: present and future: a technical and environmental review . Chem. Rev. , 2012 . 112 ( 4 ): 2082 - 2099 . DOI: 10.1021/cr200162d http://doi.org/10.1021/cr200162d .

Zhang, X. Y.; Fevre, M.; Jones, G. O.; Waymouth, R. M . Catalysis as an enabling science for sustainable polymers . Chem. Rev. , 2018 . 118 ( 2 ): 839 - 885 . DOI: 10.1021/acs.chemrev.7b00329 http://doi.org/10.1021/acs.chemrev.7b00329 .

Auras, R.; Harte, B.; Selke, S . An overview of polylactides as packaging materials . Macromol. Biosci. , 2004 . 4 ( 9 ): 835 - 864 . DOI: 10.1002/(ISSN)1616-5195 http://doi.org/10.1002/(ISSN)1616-5195 .

Farah, S.; Anderson, D. G.; Langer, R . Physical and mechanical properties of PLA, and their functions in widespread applications - a comprehensive review . Adv. Drug Deliv. Rev. , 2016 . 107 ( 21 ): 367 - 392 . .

Hou, J. Z.; Sun, X. P.; Zhang, W. X.; Li, L. L.; Teng, H . Preparation and characterization of electrospun fibers based on poly(L-lactic acid)/cellulose acetate . Chinese J. Polym. Sci. , 2012 . 30 ( 6 ): 916 - 922 . DOI: 10.1007/s10118-012-1191-6 http://doi.org/10.1007/s10118-012-1191-6 .

Yao, C.; Li, X. S.; Neoh, K. G.; Shi, Z. L.; Kang, E. T . Antibacterial poly(D,L-lactide) (PDLLA) fibrous membranes modified with quaternary ammonium moieties . Chinese J. Polym. Sci. , 2010 . 28 ( 4 ): 581 - 588 . DOI: 10.1007/s10118-010-9094-x http://doi.org/10.1007/s10118-010-9094-x .

Wu, N. J.; Zhang, H.; Fu, G. L . Super-tough poly(lactide) thermoplastic vulcanizates based on modified natural rubber . ACS Sustain. Chem. Eng. , 2017 . 5 ( 1 ): 78 - 84 . DOI: 10.1021/acssuschemeng.6b02197 http://doi.org/10.1021/acssuschemeng.6b02197 .

Wang, P.; Xu, P.; Wei, H. B.; Fang, H. G.; Ding, Y. S . Effect of block copolymer containing ionic liquid moiety on interfacial polarization in PLA/PCL blends . J. Appl. Polym. Sci. , 2018 . 10.1002/APP.46161 DOI: 10.1002/APP.46161 http://doi.org/10.1002/APP.46161 .

Delgado, P. A.; Hillmyer, M. A . Combining block copolymers and hydrogen bonding for poly(lactide) toughening . RSC Adv. , 2014 . 4 ( 26 ): 13266 - 13273 . DOI: 10.1039/c4ra00150h http://doi.org/10.1039/c4ra00150h .

Hao, Y. P.; Ge, H. H.; Han, L. J.; Zhang, H. L.; Dong, L. S.; Sun, S. L . Thermal and mechanical properties of polylactide toughened with a butyl acrylate-ethyl acrylate-glysidyl methacrylate copolymer . Chinese J. Polym. Sci. , 2013 . 31 ( 11 ): 1519 - 1527 . DOI: 10.1007/s10118-013-1350-4 http://doi.org/10.1007/s10118-013-1350-4 .

Zhang, K . Toughened sustainable green composites from poly(3-hydroxybutyrate- co -3-hydroxyvalerate) based ternary blends and miscanthus biofiber . ACS Sustain. Chem. Eng. , 2014 . 2 ( 10 ): 2345 - 2354 . DOI: 10.1021/sc500353v http://doi.org/10.1021/sc500353v .

Yu, R. L.; Zhang, L. S.; Feng, Y. H.; Zhang, R. Y.; Zhu, J . Improvement in toughness of polylactide by melt blending with bio-based poly(ester)urethane . Chinese J. Polym. Sci. , 2014 . 32 ( 8 ): 1099 - 1110 . DOI: 10.1007/s10118-014-1487-9 http://doi.org/10.1007/s10118-014-1487-9 .

Xing, Q.; Li, R. B.; Dong, X.; Zhang, X. Q.; Zhang, L. Y.; Wang, D. J . Phase morphology, crystallization behavior and mechanical properties of poly(L-lactide) toughened with biodegradable polyurethane: effect of composition and hard segment ratio . Chinese J. Polym. Sci. , 2015 . 33 ( 9 ): 1294 - 1304 . DOI: 10.1007/s10118-015-1679-y http://doi.org/10.1007/s10118-015-1679-y .

Zhang, K. Y.; Ran, X. H.; Wang, X. M.; Han, C. Y.; Han, L. J.; Wen, X.; Zhuang, Y. G.; Dong, L. S . Improvement in toughness and crystallization of poly(L-lactic acid) by melt blending with poly(epichlorohydrin- co -ethylene oxide) . Polym. Eng. Sci. , 2011 . 51 ( 12 ): 2370 - 2380 . DOI: 10.1002/pen.v51.12 http://doi.org/10.1002/pen.v51.12 .

Yuan, D. S.; Chen, Z. H.; Xu, C. H.; Chen, K. L.; Chen, Y. K . Fully biobased shape memory material based on novel cocontinuous structure in poly(lactic acid)/natural rubber TPVs fabricated via peroxide-induced dynamic vulcanization and in situ interfacial compatibilization . ACS Sustain. Chem. Eng. , 2015 . 3 ( 11 ): 2856 - 2865 . DOI: 10.1021/acssuschemeng.5b00788 http://doi.org/10.1021/acssuschemeng.5b00788 .

Zhang, K. Y.; Nagarajan, V.; Misra, M.; Mohanty, A. K . Supertoughened renewable PLA reactive multiphase blends system: phase morphology and performance . ACS Appl. Mater. Interfaces , 2014 . 6 ( 15 ): 12436 - 12448 . DOI: 10.1021/am502337u http://doi.org/10.1021/am502337u .

Dong, W. Y.; He, M. F.; Wang, H. T.; Ren, F. L.; Zhang, J. Q.; Zhao, X. W.; Li, Y. J . PLLA/ABS blends compatibilized by reactive comb polymers: double T g depression and significantly improved toughness . ACS Sustain. Chem. Eng. , 2015 . 3 ( 10 ): 2542 - 2550 . DOI: 10.1021/acssuschemeng.5b00740 http://doi.org/10.1021/acssuschemeng.5b00740 .

Lin, Y.; Zhang, K. Y.; Dong, Z. M.; Dong, L. S.; Li, Y. S . Study of hydrogen-bonded blend of polylactide with biodegradable hyperbranched poly(ester amide) . Macromolecules , 2007 . 40 ( 17 ): 6257 - 6267 . DOI: 10.1021/ma070989a http://doi.org/10.1021/ma070989a .

Han, S. I.; Yoo, Y. T; Kim, D. K.; Im, S. S . Biodegradable aliphatic polyester ionomers . Macromol. Biosci. , 2004 . 4 ( 3 ): 199 - 207 . DOI: 10.1002/(ISSN)1616-5195 http://doi.org/10.1002/(ISSN)1616-5195 .

Park, S. B.; Hwang, S. Y.; Moon, C. W.; Im, S. S . Plasticizer effect of novel PBS ionomer in PLA/PBS ionomer blends . Macromol. Res. , 2010 . 18 ( 5 ): 463 - 471 . DOI: 10.1007/s13233-010-0512-2 http://doi.org/10.1007/s13233-010-0512-2 .

Liu, H. Z.; Chen, F.; Liu, B.; Estep, G.; Zhang, J. W . Super toughened poly(lactic acid) ternary blends by simultaneous dynamic vulcanization and interfacial compatibilization . Macromolecules , 2010 . 43 ( 14 ): 6058 - 6066 . DOI: 10.1021/ma101108g http://doi.org/10.1021/ma101108g .

Liu, H. Z.; Song, W. J.; Chen, F.; Guo, L.; Zhang, J. W . Interaction of microstructure and interfacial adhesion on impact performance of polylactide (PLA) ternary blends . Macromolecules , 2011 . 44 ( 6 ): 1513 - 1522 . DOI: 10.1021/ma1026934 http://doi.org/10.1021/ma1026934 .

Liu, H. Z.; Guo, X. J.; Song, W. J.; Zhang, J. W . Effects of metal ion type on ionomer-assisted reactive toughening of poly(lactic acid) . Ind. Eng. Chem. Res. , 2013 . 52 ( 13 ): 4787 - 4793 . DOI: 10.1021/ie303317k http://doi.org/10.1021/ie303317k .

Megevand, B.; Pruvost, S.; Lins, L. C.; Livil, S.; Gérard, J. F.; Duchet-Rumeau, J . Probing nanomechanical properties with AFM to understand the structure and behavior of polymer blends compatibilized with ionic liquids . RSC Adv. , 2016 . 6 ( 98 ): 96421 - 96430 . DOI: 10.1039/C6RA18492H http://doi.org/10.1039/C6RA18492H .

Lins, L. C.; Livi, S.; Duchet-Rumeau, J.; Gérard, J. F . Phosphonium ionic liquids as new compatibilizing agents of biopolymer blends composed of poly(butylene-adipate- co -terephtalate)/poly(lactic acid) (PBAT/PLA) . RSC Adv. , 2015 . 5 ( 73 ): 59082 - 59092 . DOI: 10.1039/C5RA10241C http://doi.org/10.1039/C5RA10241C .

Wang, P.; Zhang, D.; Zhou, Y. Y.; Li, Y.; Fang, H. G.; Wei, H. B.; Ding, Y. S . A well-defined biodegradable 1,2,3-triazolium-functionalized PEG- b -PCL block copolymer: facile synthesis and its compatibilization for PLA/PCL blends . Ionics , 2018 . 10.1007/s11581-017-2234-3 DOI: 10.1007/s11581-017-2234-3 http://doi.org/10.1007/s11581-017-2234-3 .

Jérémy, O.; Jean-Marie, R.; Cédric, S.; Sophie, B.; Apostolos, E.; Dubois, P.; Giannelis, E. P . Shape-memory behavior of polylactide/silica ionic hybrids . Macromolecules , 2017 . 50 ( 7 ): 2896 - 2905 . DOI: 10.1021/acs.macromol.7b00195 http://doi.org/10.1021/acs.macromol.7b00195 .

Livi, S.; Duchet-Rumeau, J.; Gérard, J. F.; Pham, T. N . Polymers and ionic liquids: a successful wedding . Macromol. Chem. Phys. , 2015 . 216 ( 4 ): 359 - 368 . DOI: 10.1002/macp.v216.4 http://doi.org/10.1002/macp.v216.4 .

Chen, B. K.; Wu, T. Y.; Chang, Y. M.; Chen, A. F . Ductile polylactic acid prepared with ionic liquids . Chem. Eng. J. , 2013 . 215-216 886 - 893 . DOI: 10.1016/j.cej.2012.11.078 http://doi.org/10.1016/j.cej.2012.11.078 .

Gardella, L.; Furfaro, D.; Galimberti, M.; Monticelli, O . On the development of facile approach based on the use of ionic liquids: preparation of PLLA (sc-PLA)/high surface area nano-graphite systems . Green Chem. , 2015 . 17 ( 7 ): 4082 - 4088 . DOI: 10.1039/C5GC00964B http://doi.org/10.1039/C5GC00964B .

Cui, J.; Nie, F. M.; Yang, J. X.; Pan, L.; Ma, Z.; Li, Y. S . Novel imidazolium-Based poly(ionic liquid)s with different counter ions for self-healing . J. Mater. Chem. A , 2017 . 5 25220 - 25229 . DOI: 10.1039/C7TA06793C http://doi.org/10.1039/C7TA06793C .

Le, H. H.; Das, A . Triggering the self-healing properties of modifed bromobutyl rubber by intrinsically electrical heating . Macromol. Mater. Eng. , 2017 . 302 1600385 DOI: 10.1002/mame.201600385 http://doi.org/10.1002/mame.201600385 .

Das, A.; Sallat, A.; Böhme, F.; Suckow, M.; Basu, D.; Wießner, S.; Stöckelhuber, K. W.; Voit, B.; Heirich, G . Ionic modification turns commercial rubber into a self-healing material . ACS Appl. Mater. Interfaces , 2015 . 7 ( 37 ): 20623 - 20630 . DOI: 10.1021/acsami.5b05041 http://doi.org/10.1021/acsami.5b05041 .

Suckow, M.; Mordvinkin, A.; Roy, M.; Singha, N. K.; Heinrich, G.; Voit, B.; Saalwächter, K.; Böhme, F . Tuning the properties and self-healing behavior of ionically modified poly(isobutylene- co -isoprene) rubber . Macromolecules , 2018 . 51 ( 2 ): 468 - 479 . DOI: 10.1021/acs.macromol.7b02287 http://doi.org/10.1021/acs.macromol.7b02287 .

Meng, Q. Q.; Wang, B.; Pan, L.; Li, Y. S.; Ma, Z . Synthesis and properties of isotactic polypropylene ionomers containing ammonium Ions . Acta Polymerica Sinica (in Chinese) , 2017 . 11 1762 - 1772 . .

Lee, M.; Choi, U. H.; Wi, S.; Slebodnick, C.; Colby, R. H.; Gibson, H. W . 1,2-Bis[ N -( N ′-alkylimidazolium)] ethane salts: a new class of organic ionic plastic crystals . J. Mater. Chem. , 2011 . 21 ( 33 ): 12280 - 12287 . DOI: 10.1039/c1jm10995b http://doi.org/10.1039/c1jm10995b .

Dakin, J. M.; Shanmugam, K. V. S.; Twigg, C.; Whitney, R. A.; Parent, J. S . Isobutylene-rich macromonomers: dynamics and yields of peroxide-initiated crosslinking . Polym. Chem. , 2015 . 53 ( 1 ): 123 - 132 . DOI: 10.1002/pola.27462 http://doi.org/10.1002/pola.27462 .

Parent, J. S.; Porter, A. M. J.; Kleczek, M. R.; Whitney, R. A . Imidazolium bromide derivatives of poly(isobutylene- co -isoprene): a new class of elastomeric ionomers . Polymer , 2011 . 52 ( 24 ): 5410 - 5418 . DOI: 10.1016/j.polymer.2011.10.021 http://doi.org/10.1016/j.polymer.2011.10.021 .

Kim, A.; Miller, K. M . Synthesis and thermal analysis of crosslinked imidazolium-containing polyester networks prepared by Michael addition polymerization . Polymer , 2012 . 53 ( 25 ): 5666 - 5674 . DOI: 10.1016/j.polymer.2012.10.040 http://doi.org/10.1016/j.polymer.2012.10.040 .

Ye, Y. S.; Sharick, S.; Davis, E. M.; Winey, K. I.; Elabd, Y. A . High hydroxide conductivity in polymerized ionic liquid block copolymers . ACS Macro Lett. , 2013 . 2 ( 7 ): 575 - 580 . DOI: 10.1021/mz400210a http://doi.org/10.1021/mz400210a .

Nykaza, J. R.; Ye, Y. S.; Elabd, Y. A . Polymerized ionic liquid diblock copolymers with long alkyl side-chain length . Polymer , 2014 . 55 ( 16 ): 3360 - 3369 . DOI: 10.1016/j.polymer.2014.04.003 http://doi.org/10.1016/j.polymer.2014.04.003 .

Wu, J. R.; Huang, G. S.; Pan, Q. Y.; Zheng, J.; Zhu, Y. C.; Wang, B . An investigation on the molecular mobility through the glass transition of chlorinated butyl rubber . Polymer , 2007 . 48 ( 26 ): 7653 - 7659 . DOI: 10.1016/j.polymer.2007.11.006 http://doi.org/10.1016/j.polymer.2007.11.006 .

Mora-Barrantes, I.; Malmierica, M. A.; Valentin, J. L.; Rodriguez, A.; Ibarra, L . Effect of covalent cross-links on the network structure of thermo-reversible ionic elastomers . Soft Matter , 2012 . 8 ( 19 ): 5201 - 5213 . DOI: 10.1039/c2sm06975j http://doi.org/10.1039/c2sm06975j .

Marin, N.; Favis, B. D . Co-continuous morphology development in partially miscible PMMA/PC blends . Polymer , 2002 . 43 ( 17 ): 4723 - 4731 . DOI: 10.1016/S0032-3861(02)00280-X http://doi.org/10.1016/S0032-3861(02)00280-X .

Harrats, C.; Thomas, S. and Groeninckx, G. " Micro- and nanostructured multiphase polymer blends system”, CRC Press, 2006, p. 4-33.

Phetwarotai, W.; Tanrattanakul, V.; Phusunti, N . Synergistic effect of nucleation and compatibilization on the polylactide and poly(butylene adipate- co -terephthalate) blend films . Chinese J. Polym. Sci. , 2016 . 34 ( 9 ): 1129 - 1140 . DOI: 10.1007/s10118-016-1834-0 http://doi.org/10.1007/s10118-016-1834-0 .

Nagarajan, V . Overcoming the fundamental challenges in improving the impact strength and crystallinity of PLA biocomposites: influence of nucleating agent and mold temperature . ACS Appl. Mater. Interfaces , 2015 . 7 ( 21 ): 11203 - 11214 . DOI: 10.1021/acsami.5b01145 http://doi.org/10.1021/acsami.5b01145 .

Yu, F.; Huang, H. X . Simultaneously toughening and reinforcing poly(lactic acid)/thermoplastic polyurethane blend via enhancing interfacial adhesion by hydrophobic silica nanoparticles . Polym. Test. , 2015 . 45 107 - 113 . DOI: 10.1016/j.polymertesting.2015.06.001 http://doi.org/10.1016/j.polymertesting.2015.06.001 .

Zhang, K. Y.; Mohanty, A. K.; Misra, M . Fully biodegradable and biorenewable ternary blends from polylactide, poly(3-hydroxybutyrate- co -hydroxyvalerate) and poly(butylene succinate) with balanced properties . ACS Appl. Mater. Interfaces , 2012 . 4 ( 6 ): 3091 - 3101 . DOI: 10.1021/am3004522 http://doi.org/10.1021/am3004522 .

Zhang, K. Y.; Nagarajan, V.; Misra, M.; Mohanty, A. K . Super toughened renewable PLA reactive multiphase blends system: phase morphology and performance . ACS Appl. Mater. Interfaces , 2014 . 6 ( 15 ): 12436 - 12448 . DOI: 10.1021/am502337u http://doi.org/10.1021/am502337u .

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Effect of Physical Aging on Heterogeneity of Poly(ε-caprolactone) Toughening Poly(lactic acid) Probed by Nanomechanical Mapping

Toughening of Poly(propylene carbonate) by Carbon Dioxide Copolymer Poly(urethane-amine) via Hydrogen Bonding Interaction

Enhanced Segment Mobility Promotes Stereocomplex Crystallization in Polymer Blends via Elevated Segmental Miscibility

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers