Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS

Lin Jia; Wen-Chao Zhang; Bin Tong; Rong-Jie Yang

doi:10.1007/s10118-018-2098-7

Your Location：

Home >

Browse articles >

Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS

ARTICLE | Updated：2021-02-18

- Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS
- Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS
- Chinese Journal of Polymer Science 2018年36卷第7期页码：871-879
- Affiliations：
  
  National Engineering Research Center of Flame Retardant Materials, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China
- Author bio：
  
  yrj@bit.edu.cn
- Funds：
- DOI：10.1007/s10118-018-2098-7
  中图分类号：
- 收稿：2017-10-09，
  
  录用：2017-11-28，
  
  网络首发：2018-03-01，
  
  纸质出版：2018-07
- Accepted：
Scan QR Code
Lin Jia, Wen-Chao Zhang, Bin Tong, 等. Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS[J]. Chinese Journal of Polymer Science, 2018,36(7):871-879.

Lin Jia, Wen-Chao Zhang, Bin Tong, et al. Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS[J]. Chinese Journal of Polymer Science, 2018, 36(7): 871-879.
Lin Jia, Wen-Chao Zhang, Bin Tong, 等. Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS[J]. Chinese Journal of Polymer Science, 2018,36(7):871-879. DOI： 10.1007/s10118-018-2098-7.

Lin Jia, Wen-Chao Zhang, Bin Tong, et al. Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS[J]. Chinese Journal of Polymer Science, 2018, 36(7): 871-879. DOI： 10.1007/s10118-018-2098-7.

摘要

Abstract

Poly(lactic acid) (PLA) composites with 9

10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and DOPO-containing polyhedral oligomeric silsesquioxane (DOPO-POSS) were prepared

via

melting extrusion and injection molding. The crystallization

mechanical

and flame-retardant properties of PLA/DOPO and PLA/DOPO-POSS were investigated by differential scanning calorimetry (DSC)

X-ray diffraction (XRD)

tensile testing

thermogravimetric analysis (TGA)

limiting oxygen index (LOI)

and cone calorimeter test. The DSC results showed that the DOPO added could act as a plasticizer as reflected by lower glass transition temperature and inhibited crystallization of part of the PLA; the DOPO-POSS acted like a filler in the PLA matrix and slightly improved the crystallinity of the PLA matrix. The XRD and DSC analyses indicated that the PLA composites by cold molding injection were amorphous

and the PLA composites following a heat treatment in an oven at 120 °C for 30 min achieved crystallinity. All the PLA and its composites after heat treatment had improved mechanical properties. The thermogravimetric analysis (TGA) tests showed that the PLA

DOPO and DOPO-POSS decomposed separately in the PLA/DOPO and PLA/DOPO-POSS

respectively. The cone calorimeter tests offered clear evidence that addition of the DOPO-POSS resulted in an evident reduction of 25% for the peak of heat release rate (p-HRR). It was also confirmed that the crystalline flame-retardant PLA composites after heat treatment had better flame retardant properties than the amorphous PLA composites prepared by the cold molding.

关键词

Keywords

references

La Mantia, F. P.; Morreale, M . Green composites: a brief review . Composites Part A , 2011 . 42 ( 6 ): 579 - 588 . DOI: 10.1016/j.compositesa.2011.01.017 http://doi.org/10.1016/j.compositesa.2011.01.017 .

Mohanty, A. K.; Misra, M.; Drzal, L. T . Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world . J. Polym. Environ. , 2002 . 10 ( 1 ): 19 - 26 . .

de Azeredo, H. M. C . Nanocomposites for food packaging applications . Food. Res. Int. , 2009 . 42 ( 9 ): 1240 - 1253 . DOI: 10.1016/j.foodres.2009.03.019 http://doi.org/10.1016/j.foodres.2009.03.019 .

Carrasco, F.; Pagès, P.; Gámez-Pérez, J.; Santana, O. O.; Maspoch, M. L . Processing of poly(lactic acid): characterization of chemical structure, thermal stability and mechanical properties . Polym. Degrad. Stab. , 2010 . 95 ( 2 ): 116 - 125 . DOI: 10.1016/j.polymdegradstab.2009.11.045 http://doi.org/10.1016/j.polymdegradstab.2009.11.045 .

Ye, L.; Ren, J.; Cai, S. Y; Wang, Z. G.; Li, J. B . Poly(lactic acid) nanocomposites with improved flame retardancy and impact strength by combining of phosphinates and organoclay . Chinese. J. Polym. Sci. , 2016 . 34 ( 6 ): 785 - 796 . DOI: 10.1007/s10118-016-1799-z http://doi.org/10.1007/s10118-016-1799-z .

Ye, H.; Hou, K.; Zhou, Q . Improve the thermal and mechanical properties of poly(L-lactide) by forming nanocomposites with pristine vermiculite . Chinese J. Polym. Sci. , 2016 . 34 ( 1 ): 1 - 12 . DOI: 10.1007/s10118-016-1724-5 http://doi.org/10.1007/s10118-016-1724-5 .

Srithep, Y.; Nealey, P.; Turng, L. S . Effects of annealing time and temperature on the crystallinity and heat resistance behavior of injection-molded poly(lactic acid) . Polym. Eng. Sci. , 2013 . 53 ( 3 ): 580 - 588 . DOI: 10.1002/pen.v53.3 http://doi.org/10.1002/pen.v53.3 .

Lv, S.; Gu, J.; Cao, J.; Tan, H.; Zhang, Y . Effect of annealing on the thermal properties of poly(lactic acid)/starch blends . Int. J. Biol. Macromol. , 2015 . 74 297 - 303 . DOI: 10.1016/j.ijbiomac.2014.12.022 http://doi.org/10.1016/j.ijbiomac.2014.12.022 .

Pérez-Fonseca, A. A.; Robledo-Ortíz, J. R.; González-Núñez, R.; Rodrigue, D . Effect of thermal annealing on the mechanical and thermal properties of polylactic acid–cellulosic fiber biocomposites . J. Appl. Polym. Sci. , 2016 . DOI: 10.1002/app.43750 DOI: 10.1002/app.43750 http://doi.org/10.1002/app.43750 .

Gu, L.; Qiu, J.; Sakai, E . Effect of DOPO-containing flame retardants on poly(lactic acid): non-flammability, mechanical properties and thermal behaviors . Chem. Res. Chin. Univ. , 2017 . 33 ( 1 ): 143 - 149 . DOI: 10.1007/s40242-017-6196-9 http://doi.org/10.1007/s40242-017-6196-9 .

Jiang, P.; Gu, X.; Zhang, S.; Wu, S.; Zhao, Q.; Hu, Z . Synthesis, characterization, and utilization of a novel phosphorus/nitrogen-containing flame retardant . Ind. Eng. Chem. Res. , 2015 . 54 ( 11 ): 2974 - 2982 . DOI: 10.1021/ie505021d http://doi.org/10.1021/ie505021d .

Yu, T.; Tuerhongjiang, T.; Sheng, C.; Li, Y . Phosphorus-containing diacid and its application in jute/poly(lactic acid) composites: Mechanical, thermal and flammability properties . Composites Part A , 2017 . 97 60 - 66 . DOI: 10.1016/j.compositesa.2017.03.004 http://doi.org/10.1016/j.compositesa.2017.03.004 .

Sirin, H.; Kodal, M.; Ozkoc, G . The influence of POSS type on the properties of PLA . Polym. Compos. , 2016 . 37 ( 5 ): 1497 - 1506 . DOI: 10.1002/pc.v37.5 http://doi.org/10.1002/pc.v37.5 .

Tang, L.; Qiu, Z . Effect of poly(ethylene glycol)-polyhedral oligomeric silsesquioxanes on the thermal and mechanical properties of biodegradable poly(L-lactide) . Compos. Commun. , 2017 . 3 11 - 13 . DOI: 10.1016/j.coco.2016.11.003 http://doi.org/10.1016/j.coco.2016.11.003 .

Turan, D.; Sirin, H.; Ozkoc, G . Effects of POSS particles on the mechanical, thermal, and morphological properties of PLA and Plasticised PLA . J. Appl. Polym. Sci. , 2011 . 121 ( 2 ): 1067 - 1075 . DOI: 10.1002/app.33802 http://doi.org/10.1002/app.33802 .

Xuan, S.; Hu, Y.; Song, L.; Wang, X.; Yang, H.; Lu, H . Synergistic effect of polyhedral oligomeric silsesquioxane on the flame retardancy and thermal degradation of intumescent flame retardant polylactide . Combust. Sci. Technol. , 2012 . 184 ( 4 ): 456 - 468 . DOI: 10.1080/00102202.2011.648032 http://doi.org/10.1080/00102202.2011.648032 .

Qiu, Z.; Pan, H . Preparation, crystallization and hydrolytic degradation of biodegradable poly(L-lactide)/polyhedral oligomeric silsesquioxanes nanocomposite . Compos. Sci. Technol. , 2010 . 70 ( 7 ): 1089 - 1094 . DOI: 10.1016/j.compscitech.2009.11.001 http://doi.org/10.1016/j.compscitech.2009.11.001 .

Baldi, F.; Bignotti, F.; Fina, A.; Tabuani, D.; Riccò, T . Mechanical characterization of polyhedral oligomeric silsesquioxane/polypropylene blends . J. Appl. Polym. Sci. , 2007 . 105 ( 2 ): 935 - 943 . DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

Wang, X.; Xuan, S.; Song, L.; Yang, H.; Lu, H.; Hu, Y . Synergistic effect of POSS on mechanical properties, flammability, and thermal degradation of intumescent flame retardant polylactide composites . J. Macromol. Sci. Part B Phys. , 2012 . 51 ( 2 ): 255 - 268 . DOI: 10.1080/00222348.2011.585334 http://doi.org/10.1080/00222348.2011.585334 .

Zhang, W.; Yang, R . Synthesis of phosphorus-containing polyhedral oligomeric silsesquioxanes via hydrolytic condensation of a modified silane . J. Appl. Polym. Sci. , 2011 . 122 ( 5 ): 3383 - 3389 . DOI: 10.1002/app.34471 http://doi.org/10.1002/app.34471 .

Zhang, W.; Li, X.; Guo, X.; Yang, R . Mechanical and thermal properties and flame retardancy of phosphorus-containing polyhedral oligomeric silsesquioxane (DOPO-POSS)/polycarbonate composites . Polym. Degrad. Stab. , 2010 . 95 ( 12 ): 2541 - 2546 . DOI: 10.1016/j.polymdegradstab.2010.07.036 http://doi.org/10.1016/j.polymdegradstab.2010.07.036 .

Tsuji, H.; Ikada, Y . Crystallization from the melt of poly(lactide)s with different optical purities and their blends . Macromol. Chem. Phys. , 1996 . 197 ( 10 ): 3483 - 3499 . DOI: 10.1002/macp.1996.021971033 http://doi.org/10.1002/macp.1996.021971033 .

Yang, G. Z.; Chen, X.; Wang, W.; Wang, M.; Liu, T.; Li, C.Z . Nonisothermal crystallization and melting behavior of a luminescent conjugated polymer, poly(9,9-dihexylfluorene-alt-co-2,5-didecyloxy-1,4-phenylene) . J. Polym. Sci., Part B: Polym. Phys. , 2007 . 45 ( 8 ): 976 - 987 . DOI: 10.1002/(ISSN)1099-0488 http://doi.org/10.1002/(ISSN)1099-0488 .

Gumus, S.; Ozkoc, G.; Aytac, A . Plasticized and unplasticized PLA/organoclay nanocomposites: short- and long-term thermal properties, morphology, and nonisothermal crystallization behavior . J. Appl. Polym. Sci. , 2012 . 123 ( 5 ): 2837 - 2848 . DOI: 10.1002/app.v123.5 http://doi.org/10.1002/app.v123.5 .

Zhang, J.; Tashiro, K.; Tsuji, H.; Domb, A. J . Disorder-to-order phase transition and multiple melting behavior of poly(L-lactide) investigated by simultaneous measurements of WAXD and DSC . Macromolecules , 2008 . 41 ( 4 ): 1352 - 1357 . DOI: 10.1021/ma0706071 http://doi.org/10.1021/ma0706071 .

Schartel, B.; Hull, T. R . Development of fire-retarded materials—Interpretation of cone calorimeter data . Fire Mater. , 2007 . 31 ( 5 ): 327 - 354 . DOI: 10.1002/(ISSN)1099-1018 http://doi.org/10.1002/(ISSN)1099-1018 .

浏览量

593

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Study on the Differences in Crystallization Behavior of Poly(lactic acid) (PLA) Induced by Amide-based and Hydrazide-based Nucleating Agents

Simultaneous Improvement of Strength and Toughness of Poly(lactic acid) via Multiple Dynamic Pressure

Synthesis of Inorganic Silica Grafted Three-arm PLLA and Their Behaviors for PLA Matrix

Optically Active Helical Poly(phenyl isocyanide)s Bearing Achiral Benzanilide Pendants: from Controlled Synthesis to Enantioseparation Application

pH-Responsive L-Cysteine-conjugated Polydopamine Nanocarriers for Controlled Release of Emamectin Benzoate against Pieris brassicae