Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing

Wen-jin Yu; Shu-man Xu; Li Zhang; Qiang Fu

doi:10.1007/s10118-017-1954-1

Your Location：

Home >

Browse articles >

Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing

Papers | Updated：2021-02-18

- Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing
- Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing
- Chinese Journal of Polymer Science 2017年35卷第9期页码：1132-1142
- Affiliations：
  
  College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu 610065, China
- Author bio：
  
  Qiang Fu (傅强), E-mail:qiangfu@scu.edu.cn
- Funds：
  
  This work was financially supported by the National Natural Science Foundation of China(51421061)
- DOI：10.1007/s10118-017-1954-1
  中图分类号：
- 收稿：2017-02-13，
  
  修回：2017-3-14，
  
  录用：2017-3-19，
  
  纸质出版：2017-09-05
- Accepted：
Scan QR Code
Wen-jin Yu, Shu-man Xu, Li Zhang, 等. Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing[J]. Chinese Journal of Polymer Science, 2017,35(9):1132-1142.

Wen-jin Yu, Shu-man Xu, Li Zhang, et al. Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing[J]. Chinese Journal of Polymer Science, 2017, 35(9): 1132-1142.
Wen-jin Yu, Shu-man Xu, Li Zhang, 等. Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing[J]. Chinese Journal of Polymer Science, 2017,35(9):1132-1142. DOI： 10.1007/s10118-017-1954-1.

Wen-jin Yu, Shu-man Xu, Li Zhang, et al. Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing[J]. Chinese Journal of Polymer Science, 2017, 35(9): 1132-1142. DOI： 10.1007/s10118-017-1954-1.

摘要

Abstract

In this work

completely immiscible polyethylene/polyamide12 (PE/PA12) blends were prepared by high shear extruder. The morphology and mechanical properties of the blends were investigated as a function of rotation speed. It was found that the high shear processing is an effective method to improve the dispersion of the PA12 phase in PE matrix when PA12 contents are 5 wt% and 10 wt%

and the dispersed phase particle size is reduced with the increase of rotation speed from 100 r/min to 500 r/min. However

with further increase of PA12 content to 20 wt%

high shear processing has no effect on the phase morphology of the blends. Accordingly

a largely increased elongation at break and impact strength are observed for PE/PA12/95/5 and PE/PA12/90/10 blends obtained at high rotation speeds but no effect on the property of PE/PA12/80/20. Annealing experiment demonstrated that the obtained phase morphology is not stable thus compatibilizer should be introduced in the future work. This work could provide a guideline for the application of high shear processing in the preparation of polymer blends with huge polarity difference.

关键词

Keywords

references

W. Phetwarotai , V. Tanrattanakul , N. Phusunti . Chinese J. Polym. Sci. , 2016 . 34 ( 9 ): 1129 DOI: 10.1007/s10118-016-1834-0 http://doi.org/10.1007/s10118-016-1834-0 .

H. Yao , J.L. Niu , J. Zhang , N.Y. Ning , X.Q. Yang , M. Tian , X.L. Sun , L.Q. Zhang , S.K. Yan . Chinese J. Polym. Sci. , 2016 . 34 ( 7 ): 820 DOI: 10.1007/s10118-016-1794-4 http://doi.org/10.1007/s10118-016-1794-4 .

M. Zhou , X.P. Li , M. Jin , C. Xia , K.Z. Shen , J. Zhang . Chinese J. Polym. Sci. , 2016 . 34 ( 8 ): 1001 DOI: 10.1007/s10118-016-1814-4 http://doi.org/10.1007/s10118-016-1814-4 .

L. Leibler . Prog. Polym. Sci. , 2005 . 30 ( 8-9 ): 898 DOI: 10.1016/j.progpolymsci.2005.06.007 http://doi.org/10.1016/j.progpolymsci.2005.06.007 .

Y.W. Xu , J. Loi , P. Delgado , V. Topolkaraev , R.J. McEneany , C.W. Macosko , M.A. Hillmyer . Ind. Eng. Chem. Res. , 2015 . 54 ( 23 ): 6108 DOI: 10.1021/acs.iecr.5b00882 http://doi.org/10.1021/acs.iecr.5b00882 .

H. Pernot , M. Baumert , F. Court , L. Leibler . Nat. Mater. , 2002 . 1 ( 1 ): 54 DOI: 10.1038/nmat711 http://doi.org/10.1038/nmat711 .

F.X. Xiang , Y.X. Wang , Y.Y. Shi , T. Huang , C. Chen , Y. Peng , Y. Wang . Polym. Int. , 2012 . 61 ( 8 ): 1334 DOI: 10.1002/pi.v61.8 http://doi.org/10.1002/pi.v61.8 .

G. Filippone , N.T. Dintcheva , D. Acierno , F.P. Mantia . Polymer , 2008 . 49 1312 DOI: 10.1016/j.polymer.2008.01.045 http://doi.org/10.1016/j.polymer.2008.01.045 .

J.R. Araujo , M.R. Vallim , M.A.S. Spinace , M.A. Paoli . J. Appl. Polym. Sci. , 2008 . 110 1310 DOI: 10.1002/app.v110:3 http://doi.org/10.1002/app.v110:3 .

M. Freluche , I. Iliopoulos , J.J. Flat , A.V. Ruzette , L. Leibler . Polymer , 2005 . 46 6554 DOI: 10.1016/j.polymer.2005.05.009 http://doi.org/10.1016/j.polymer.2005.05.009 .

L. Minkova , H. Yordanov , S. Filippi , N. Grizzuti . Polymer , 2003 . 44 7925 DOI: 10.1016/j.polymer.2003.09.054 http://doi.org/10.1016/j.polymer.2003.09.054 .

A. Argoud , L. Trouillet-Fonti , S. Ceccia , P. Sotta . Eur. Polym. J. , 2014 . 50 177 DOI: 10.1016/j.eurpolymj.2013.10.026 http://doi.org/10.1016/j.eurpolymj.2013.10.026 .

J. Chen , J.W. Chen , H.M. Chen , J.H. Yang , C. Chen , Y. Wang . Compos. Part B Eng. , 2013 . 54 422 DOI: 10.1016/j.compositesb.2013.06.014 http://doi.org/10.1016/j.compositesb.2013.06.014 .

S. Mallick , P. Kar , B.B. Khatua . J. Appl. Polym. Sci. , 2012 . 123 ( 3 ): 1801 DOI: 10.1002/app.v123.3 http://doi.org/10.1002/app.v123.3 .

A. Hallden , M.J. Deriss , B. Wesslen . Polymer , 2001 . 42 8743 DOI: 10.1016/S0032-3861(01)00452-9 http://doi.org/10.1016/S0032-3861(01)00452-9 .

W. Sinthavathavorn , M. Nithitanakul , R. Magaraphan , B.P. Grady . J. Appl. Polym. Sci. , 2008 . 107 ( 5 ): 3090 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

D.Y. Bai , K. Wang , H.W. Bai , Q. Zhang , Q. Fu . Acta Polymerica Sinica (in Chinese) , 2016 . ( 7 ): 843 .

S. Deng , X.D. Qi , Y.L. Zhu , H.J. Zhou , F. Chen , Q. Fu . Chinese J. Polym. Sci. , 2016 . 34 ( 10 ): 1270 DOI: 10.1007/s10118-016-1836-y http://doi.org/10.1007/s10118-016-1836-y .

W. Sinthavathavorn , M. Nithitanakul , R. Magaraphan , B.P. Grady . J. Appl. Polym. Sci. , 2008 . 107 ( 5 ): 3090 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

A. Bouaziz , V. Massardier , M. Louizi , M. Jaziri . Polym. Eng. Sci. , 2015 . 55 ( 10 ): 2328 DOI: 10.1002/pen.v55.10 http://doi.org/10.1002/pen.v55.10 .

G.X. Chen , Y. Li , H. Shimizu . Carbon , 2007 . 45 ( 12 ): 2334 DOI: 10.1016/j.carbon.2007.07.017 http://doi.org/10.1016/j.carbon.2007.07.017 .

Y. Li , H. Shimizu . Eur. Polym. J. , 2006 . 42 ( 12 ): 3202 DOI: 10.1016/j.eurpolymj.2006.08.014 http://doi.org/10.1016/j.eurpolymj.2006.08.014 .

Y. Li , H. Shimizu . Polymer , 2007 . 48 ( 8 ): 2203 DOI: 10.1016/j.polymer.2007.02.066 http://doi.org/10.1016/j.polymer.2007.02.066 .

Y. Li , H. Shimizu . Polym. Eng. Sci. , 2011 . 51 ( 7 ): 1437 DOI: 10.1002/pen.v51.7 http://doi.org/10.1002/pen.v51.7 .

M. Louizi , V. Massardier , P. Cassagnau . Macromol. Mater. Eng. , 2014 . 299 674 DOI: 10.1002/mame.v299.6 http://doi.org/10.1002/mame.v299.6 .

F. Teyssandier , P. Cassagnau , J.F. Gérard , N. Mignard , F. Mélis . Mater. Chem. Phys. , 2012 . 133 913 DOI: 10.1016/j.matchemphys.2012.01.117 http://doi.org/10.1016/j.matchemphys.2012.01.117 .

M. Louizi , V. Massardier , F. Melis , P. Alcouffe , P. Cassagnau . Int. Polym. Proc. , 2014 . 18 118 .

Y. Li , H. Shimizu . Macromolecules , 2009 . 42 2587 DOI: 10.1021/ma802662c http://doi.org/10.1021/ma802662c .

H. Shimizu , Y.J. Li , A. Kaito , H. Sano . Macromolecules , 2005 . 38 7880 DOI: 10.1021/ma051395f http://doi.org/10.1021/ma051395f .

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

A Robust Self-healing Polyurethane Elastomer Enabled by Tuning the Molecular Mobility and Phase Morphology through Disulfide Bonds

Phase Morphology, Crystallization Behavior and Mechanical Properties of Poly(L-lactide) Toughened with Biodegradable Polyurethane: Effect of Composition and Hard Segment Ratio

Reconstruction of Core-Shell Dispersed Particles in Impact Polypropylene Copolymer during Extrusion

Size Distribution and Anisotropy of the Minor Phase Droplets in Polypropylene/Ethylene-Octene Copolymer Blends: Effects of Shear and Component Miscibility

INFLUENCE OF SHEARING ON IMPACT POLYPROPYLENE COPOLYMER: PHASE MORPHOLOGY, THERMAL AND RHEOLOGICAL BEHAVIOR