State Key Laboratory for Modification of Chemical Fibers and Polymer Materials & College of Materials Science and Engineering, Donghua University, Shanghai 201620, China
Ru Xiao (肖茹), E-mail: xiaoru@dhu.edu.cn
收稿:2017-01-18,
修回:2017-2-9,
录用:2017-2-24,
纸质出版:2017-08
Scan QR Code
Zhao-po Zeng, Ze-chun Shao, Ru Xiao, 等. Structure Evolution Mechanism of Poly (acrylonitrile/itaconic acid/acrylamide) during Thermal Oxidative Stabilization Process[J]. Chinese Journal of Polymer Science, 2017,35(8):1020-1034.
Zhao-po Zeng, Ze-chun Shao, Ru Xiao, et al. Structure Evolution Mechanism of Poly (acrylonitrile/itaconic acid/acrylamide) during Thermal Oxidative Stabilization Process[J]. Chinese Journal of Polymer Science, 2017, 35(8): 1020-1034.
Zhao-po Zeng, Ze-chun Shao, Ru Xiao, 等. Structure Evolution Mechanism of Poly (acrylonitrile/itaconic acid/acrylamide) during Thermal Oxidative Stabilization Process[J]. Chinese Journal of Polymer Science, 2017,35(8):1020-1034. DOI: 10.1007/s10118-017-1945-2.
Zhao-po Zeng, Ze-chun Shao, Ru Xiao, et al. Structure Evolution Mechanism of Poly (acrylonitrile/itaconic acid/acrylamide) during Thermal Oxidative Stabilization Process[J]. Chinese Journal of Polymer Science, 2017, 35(8): 1020-1034. DOI: 10.1007/s10118-017-1945-2.
Polyacrylonitrile (PAN) polymers with different compositions were prepared by an efficient aqueous free-radical polymerization technique. Thermal properties of polyacrylonitrile homopolymer (PAN)
poly(acrylonitrile/itaconic acid)[P(AN/IA)] and poly(acrylonitrile/itaconic acid/acrylamide)[P(AN/IA/AM)]
were studied by Fourier transform infrared spectroscopy
X-ray diffraction
differential scanning calorimetry and thermogravimetry in detail. It was found that AM had the ability to initiate and accelerate thermal oxidative stabilization process
which was confirmed by the lower initiation temperature and broader exothermic peak in P(AN/IA/AM) as compared with that in P(AN/IA) and PAN. The intensity of heat releasing during the thermal treatment was relaxed due to the presence of two separated exothermic peaks. Accompanied by DSC analysis and calculation of the apparent activation energy of cyclization reaction
two peaks were assigned to the ionic and free radical induction mechanisms
respectively. The higher rate constant in P(AN/IA/AM) indicated that the ionic mechanism actually had a kinetic advantage at promoting thermal stability over the free radical mechanism. This study clearly show that the synthesized P(AN/IA/AM) terpolymers possess larger room to adjust manufacture parameters to fabricate high performance of PA
N
-based carbon fibers.
N. Yusof , A.F. Ismail . . J. Anal. Appl. Pyrol. , 2012 . 93 1 DOI: 10.1016/j.jaap.2011.10.001 http://doi.org/10.1016/j.jaap.2011.10.001 .
M.S.A. Rahaman , A.F. Ismail , A. Mustafa . . Polym. Degrad. Stab. , 2007 . 92 1421 DOI: 10.1016/j.polymdegradstab.2007.03.023 http://doi.org/10.1016/j.polymdegradstab.2007.03.023 .
Z.X. Dong , T. Feng , C. Zheng , G.M. Li , F.F. Liu , X.P. Qiu . . Chinese J. Polym. Sci. , 2016 . 34 ( 11 ): 1386 DOI: 10.1007/s10118-016-1841-1 http://doi.org/10.1007/s10118-016-1841-1 .
E. Frank , F. Hermanutz , M.R. Buchmeiser . . Macromol. Mater. Eng. , 2012 . 297 493 DOI: 10.1002/mame.v297.6 http://doi.org/10.1002/mame.v297.6 .
A.K. Gupta , D.K. Paliwal , P. Bajaj. . . J. Appl. Polym. Sci. , 1996 . 59 1819 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
D.Y. Lei , K. Devarayan , X.D. Li , W.K. Choi , M.K. Seo , B.S. Kim . . Carbon Lett. , 2014 . 15 ( 4 ): 290 DOI: 10.5714/CL.2014.15.4.290 http://doi.org/10.5714/CL.2014.15.4.290 .
R. Cheraghi , S.H. Bahrami , M. Arami , M. Enayati . . J. Polym. Res. , 2016 . 23 207 DOI: 10.1007/s10965-016-1104-4 http://doi.org/10.1007/s10965-016-1104-4 .
P. Bajaj , T.V. Sreekumar , K. Sen . . J. Appl. Polym. Sci. , 2001 . 79 1640 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
P. Li , H.G Shan . . J. Appl. Polym. Sci. , 1995 . 56 877 DOI: 10.1002/app.1995.070560712 http://doi.org/10.1002/app.1995.070560712 .
Y. Xue , J. Liu , J.Y. Liang . . Polym. Degrad. Stab. , 2013 . 98 219 DOI: 10.1016/j.polymdegradstab.2012.10.018 http://doi.org/10.1016/j.polymdegradstab.2012.10.018 .
N.U. Nguyen-Thai , S.C. Hong . . Carbon , 2014 . 69 571 DOI: 10.1016/j.carbon.2013.12.068 http://doi.org/10.1016/j.carbon.2013.12.068 .
J. Liu , F. Lian , Z.K. Ma , J.Y. Liang . . Chinese J. Polym. Sci. , 2012 . 30 ( 6 ): 786 DOI: 10.1007/s10118-012-1165-8 http://doi.org/10.1007/s10118-012-1165-8 .
S.H. Bahrami , P. Bajaj , K. Sen . . J. Appl. Polym. Sci. , 2003 . 88 685 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
N. Grassie , P. McGuchan . . J. Appl. Polym. Sci. , 1971 . 7 1357 .
N. Grassie , R. McGuchan . . Eur. Polym. J. , 1972 . 8 257 DOI: 10.1016/0014-3057(72)90032-8 http://doi.org/10.1016/0014-3057(72)90032-8 .
G.P. Wu , C.X. Lu , L.C. Ling , Y.G. Lu . . Polym. Bull. , 2009 . 62 667 DOI: 10.1007/s00289-009-0039-x http://doi.org/10.1007/s00289-009-0039-x .
P. Bajaj , T.V. Sreekumar , K. Sen . . Polymer , 2001 . 42 1707 DOI: 10.1016/S0032-3861(00)00583-8 http://doi.org/10.1016/S0032-3861(00)00583-8 .
R. Devasia , Nair C.P. Reghunadhan , K.N. Ninan . . Eur. Polym. J. , 2002 . 38 2003 DOI: 10.1016/S0014-3057(02)00086-1 http://doi.org/10.1016/S0014-3057(02)00086-1 .
R. Devasia , Nair C.P. Reghunadhan , K.N. Ninan . . Eur. Polym. J. , 2003 . 39 537 DOI: 10.1016/S0014-3057(02)00275-6 http://doi.org/10.1016/S0014-3057(02)00275-6 .
R. Cheraghi , S.H. Bahrami , M. Arami , M. Enayati . . J. Polym. Res. , 2016 . 23 207 DOI: 10.1007/s10965-016-1104-4 http://doi.org/10.1007/s10965-016-1104-4 .
J.S. Tsai , C.H. Lin . . J. Mater. Sci. Lett. , 1990 . 9 869 DOI: 10.1007/BF00722155 http://doi.org/10.1007/BF00722155 .
W.X. Zhang , J. Liu , C.G. Wang . . Carbon , 2003 . 41 2805 DOI: 10.1016/S0008-6223(03)00391-9 http://doi.org/10.1016/S0008-6223(03)00391-9 .
X.P. Wu , X.L. Zhang , C.X. Lu , L.C. Ling . . Chinese J. Polym. Sci. , 2010 . 28 ( 3 ): 367 DOI: 10.1007/s10118-010-9026-9 http://doi.org/10.1007/s10118-010-9026-9 .
N. Gressie , R. McGuchan . . Eur. Polym. J. , 1997 . 6 ( 9 ): 1277 .
W. Watt , W. Johnson . . Nature , 1975 . 257 210 DOI: 10.1038/257210a0 http://doi.org/10.1038/257210a0 .
G.T. Sivy , M.M. Coleman . . Carbon , 1981 . 19 137 DOI: 10.1016/0008-6223(81)90121-4 http://doi.org/10.1016/0008-6223(81)90121-4 .
Z.Y. Fu , Y. Gui , C.L. Cao , B.J. Liu , C. Zhou , H.X. Zhang . . J. Mater. Sci. , 2014 . 49 2864 DOI: 10.1007/s10853-013-7992-3 http://doi.org/10.1007/s10853-013-7992-3 .
P. Bajaj , K. Sen , S.H. Bahrami . . J. Appl. Polym. Sci. , 1996 . 59 1539 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
A.Q. Ju , S.Y. Guang , H.Y. Xu . . Carbon , 2013 . 54 323 DOI: 10.1016/j.carbon.2012.11.044 http://doi.org/10.1016/j.carbon.2012.11.044 .
Q. Ouyang , L. Cheng , H.J. Wang , K.X. Li . . Polym. Degrad. Stab. , 2008 . 93 1415 DOI: 10.1016/j.polymdegradstab.2008.05.021 http://doi.org/10.1016/j.polymdegradstab.2008.05.021 .
G.L. Collins , N.W. Thomas , G.E. Williams . . Carbon , 1988 . 26 671 DOI: 10.1016/0008-6223(88)90070-X http://doi.org/10.1016/0008-6223(88)90070-X .
M.J. Yu , Y.J. Bai , C.G. Wang , Y. Xu , P.Z. Guo . . Mater. Lett. , 2007 . 61 2292 DOI: 10.1016/j.matlet.2006.08.071 http://doi.org/10.1016/j.matlet.2006.08.071 .
Y.H. Bang , S. Lee , H.H. Cho . . J. Appl. Polym. Sci. , 1998 . 68 2205 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
Q. Ouyang , H.J. Wang , L. Cheng , Y.H. Sun . . J. Polym. Res. , 2007 . 14 497 DOI: 10.1007/s10965-007-9133-7 http://doi.org/10.1007/s10965-007-9133-7 .
A.K. Gupta , D.K. Paliwal , P. Bajaj . . J. Appl. Polym. Sci. , 1995 . 58 1161 DOI: 10.1002/app.1995.070580710 http://doi.org/10.1002/app.1995.070580710 .
S. Arbab , A. Zeinolebadi . . Polym. Degrad. Stab. , 2013 . 98 2537 DOI: 10.1016/j.polymdegradstab.2013.09.014 http://doi.org/10.1016/j.polymdegradstab.2013.09.014 .
S.J. Xiao , B. Wang , C. Zhao , L.H. Xu , B.H. Chen . . J. Appl. Polym. Sci. , 2013 . 127 ( 3 ): 2332 DOI: 10.1002/app.37930 http://doi.org/10.1002/app.37930 .
K. Sen , P. Bajaj , T.V. Sreekumar . . J. Polym. Sci. Part B:Polym. Phys. , 2003 . 41 2949 .
E. Fitzer , D.J. Muller . . Carbon , 1975 . 13 ( 1 ): 63 DOI: 10.1016/0008-6223(75)90259-6 http://doi.org/10.1016/0008-6223(75)90259-6 .
Q. Ouyang , L. Cheng , H.J. Wang , K.X. Li . . J. Therm. Anal. Calorim. , 2008 . 94 ( 1 ): 85 DOI: 10.1007/s10973-007-8773-5 http://doi.org/10.1007/s10973-007-8773-5 .
T.B. Ozawa. . . Chem. Soc. Jpn. , 1965 . 38 1881 DOI: 10.1246/bcsj.38.1881 http://doi.org/10.1246/bcsj.38.1881 .
H.E. Kissinger . . Anal. Chem. , 1957 . 29 1702 DOI: 10.1021/ac60131a045 http://doi.org/10.1021/ac60131a045 .
G.L. Collins , N.W. Thomas , G.E. Williams . . Fiber. Sci. Technol. , 1984 . 20 37 DOI: 10.1016/0015-0568(84)90056-3 http://doi.org/10.1016/0015-0568(84)90056-3 .
0
浏览量
3
Downloads
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802046900号