Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker

Li Dang; Xue-ying Nai; Xin Liu; Dong-hai Zhu; Ya-ping Dong; Wu Li

doi:10.1007/s10118-017-1908-7

Your Location：

Home >

Browse articles >

Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker

Papers | Updated：2021-02-18

- Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker
- Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker
- Chinese Journal of Polymer Science 2017年35卷第5期页码：659-671
- Affiliations：
  
  a.Key Laboratory of Salt Lake Resources Chemistry, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008, China
  b.Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008, China
  c.University of Chinese Academy of Sciences, Beijing 100049, China
- Author bio：
  
  Wu Li (李武), E-mail:liwu2016@126.com
- Funds：
  
  This work was financially supported by the National Natural Science Foundation of China(No. 51402323);the "135" Foundation of the Qinghai Institute of Salt Lake of the Chinese Academy of Sciences(No. Y460321111);and the Natural Science Foundation of Qinghai Province, China(No. 2014-ZJ-938Q);Supplementary material is available in the online version of this article athttp://dx.doi.org/10.1007/s10118-017-1908-7.
- DOI：10.1007/s10118-017-1908-7
  中图分类号：
- 收稿：2016-10-18，
  
  修回：2016-11-24，
  
  录用：2016-11-29，
  
  纸质出版：2017-05
- Accepted：
Scan QR Code
Li Dang, Xue-ying Nai, Xin Liu, 等. Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker[J]. Chinese Journal of Polymer Science, 2017,35(5):659-671.

Li Dang, Xue-ying Nai, Xin Liu, et al. Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker[J]. Chinese Journal of Polymer Science, 2017, 35(5): 659-671.
Li Dang, Xue-ying Nai, Xin Liu, 等. Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker[J]. Chinese Journal of Polymer Science, 2017,35(5):659-671. DOI： 10.1007/s10118-017-1908-7.

Li Dang, Xue-ying Nai, Xin Liu, et al. Crystallization, Mechanical, Thermal and Rheological Properties of Polypropylene Composites Reinforced by Magnesium Oxysulfate Whisker[J]. Chinese Journal of Polymer Science, 2017, 35(5): 659-671. DOI： 10.1007/s10118-017-1908-7.

摘要

Abstract

Polypropylene (PP) composites containing magnesium oxysulfate whisker (MOSw) or lauric acid (LA) modified MOSw (LAMOSw) were prepared via melt mixing in a torque rheometer. The heterogeneous nucleating effect of LAMOSw was clearly observed in polarized light microscopy (PLM) pictures with the presence of an abundance of small spherulites. MOSw exhibited no nucleation effect and formed a few spherulites with large size. Compared with PP/MOSw composites

PP/LAMOSw exhibited better impact strength

tensile strength and nominal strain at break

ascribing to three possible reasons: (ⅰ) more

-crystal PP formed

(ⅱ) better dispersity of LAMOSw in PP matrix and (ⅲ) the plasticizing effect of LA. The results of dynamic mechanical thermal analysis (DMTA) indicated that brittleness of the PP matrix at low temperature was improved by the addition of LAMOSw

while the interfacial interactions between MOSw and PP matrix were actually weakened by LA

as evidenced by the higher tan

values over the entire range of test temperatures. In terms of the rheological properties of the composites

both the

and

′

at low frequencies increase with the addition of MOSw or LAMOSw

indicating that the PP matrix was transformed from liquid-like to solid-like. However

a network of whiskers did not form because no plateau was found in the

′

at low frequencies. With low filler content

LAMOSw produced a stronger solid-like behavior than MOSw mainly due to the better dispersion of the LAMOSw in PP matrix. However

for highly-filled composites

the

of PP/LAMOSw at low frequencies was smaller than that of PP/MOSw composite

since the particleparticle contact effect played a major role.

关键词

Keywords

references

C.D. Castel , T. Pelegrini , R.V. Barbosa , S.A. Liberman , R.S. Mauler . . Compos. Part A-Appl. S. , 2010 . 41 185 DOI: 10.1016/j.compositesa.2009.09.017 http://doi.org/10.1016/j.compositesa.2009.09.017 .

D. Bagheriasl , P.J. Carreau , C. Dubois , B. Riedl . . Compos. Sci. Technol. , 2015 . 117 357 DOI: 10.1016/j.compscitech.2015.07.012 http://doi.org/10.1016/j.compscitech.2015.07.012 .

V. Khoshkava , M.R. Kamal . . ACS Appl. Mater. Interfaces , 2014 . 6 8146 DOI: 10.1021/am500577e http://doi.org/10.1021/am500577e .

Y. Zhou , J.L. He , J. Hu , B. Dang . . J. Appl. Polym. Sci. , 2015 . 133 ( 1 ): 42863 .

M.C. Li , Y.H. Zhang , U.R. Cho . . Mater. Design , 2014 . 63 565 DOI: 10.1016/j.matdes.2014.06.032 http://doi.org/10.1016/j.matdes.2014.06.032 .

X. Ge , M.C. Li , X.X. Li , U.R. Cho . . Appl. Clay Sci. , 2015 . 118 265 DOI: 10.1016/j.clay.2015.10.003 http://doi.org/10.1016/j.clay.2015.10.003 .

C.H. Gao , T. Wang , L. Xu , C.X. Wang , Y.M. Wu . . Journal of Chemical Engineering of Chinese Universities (in Chinese) , 2014 . 28 ( 1 ): 143 .

H.D. Lu , Y. Hu , L. Yang , Z.Z. Wang , Z.Y. Chen , W.C. Fan . . Macromol. Mater. Eng. , 2004 . 289 984 DOI: 10.1002/(ISSN)1439-2054 http://doi.org/10.1002/(ISSN)1439-2054 .

B. Liu , Y. Zhang , C.Y. Wan , Y.X. Zhang , R.X. Li , G.Y. Liu . . Polym. Bull. , 2007 . 58 747 DOI: 10.1007/s00289-006-0695-z http://doi.org/10.1007/s00289-006-0695-z .

S.L. Fang , Y. Hu , L. Song , J. Zhan , Q.L. He . . J. Mater. Sci. , 2008 . 43 1057 DOI: 10.1007/s10853-007-2241-2 http://doi.org/10.1007/s10853-007-2241-2 .

Q.H. Wu , L.X. Tang , B.J. Qu . . Journal of Functional Polymers (in Chinese) , 2005 . 18 255 .

Y.Z. Jiang , Y.B. Li . . Journal of Shenyang Ligong University (in Chinese) , 2009 . 28 ( 1 ): 1 .

W. Lei , R.Z. Zhang , C.J. Gu , C. Zhang . . Thermosetting Resin (in Chinese) , 2007 . 22 26 .

X. Yan , D. Xu , D. Xue . . Acta Mater. , 2007 . 55 5747 DOI: 10.1016/j.actamat.2007.06.023 http://doi.org/10.1016/j.actamat.2007.06.023 .

T. Runčevski , C. Wu , H. Yu , B. Yang , R. Dinnebier . . J. Am. Ceram. Soc. , 2013 . 96 3609 DOI: 10.1111/jace.2013.96.issue-11 http://doi.org/10.1111/jace.2013.96.issue-11 .

J. Li , L. Xiang , Y. Jin . . J. Mater. Sci. , 2006 . 41 1345 DOI: 10.1007/s10853-006-7339-4 http://doi.org/10.1007/s10853-006-7339-4 .

H.T. Oyama , M. Sekikawa , S. Shida . . Polym. Degrad. Stab. , 2012 . 97 755 DOI: 10.1016/j.polymdegradstab.2012.02.005 http://doi.org/10.1016/j.polymdegradstab.2012.02.005 .

Y.X. Han , X. Chen , W.Z. Yin . . Non-ferrous Mining and Metallurgy (in Chinese) , 2007 . 23 42 .

W. Lei , W.G. Lei . . Fiber Reinforced Plastics/Composites (in Chinese) , 2006 . 5 13 .

K. Zhou , S.Y. Gu , Y.H. Zhang , J. Ren . . Polym. Eng. Sci. , 2012 . 52 ( 7 ): 1485 DOI: 10.1002/pen.v52.7 http://doi.org/10.1002/pen.v52.7 .

X.Y. Qiao , W.X. Zhong , K. Sun , X.D. Chen . . J. Appl. Polym. Sci. , 2009 . 114 1702 DOI: 10.1002/app.v114:3 http://doi.org/10.1002/app.v114:3 .

D. Bagherisal , P.J. Carreau , C. Dubois , B. Riedl . . Compos. Sci. Technol. , 2015 . 117 357 DOI: 10.1016/j.compscitech.2015.07.012 http://doi.org/10.1016/j.compscitech.2015.07.012 .

S. Jain , H. Goossens , Duin M. van , P. Lemstra . . Polymer , 2005 . 46 8805 DOI: 10.1016/j.polymer.2004.12.062 http://doi.org/10.1016/j.polymer.2004.12.062 .

J.Y. Zhang , G.Y. Shi , Y.H. Cao . . Polym. Commun. , 1986 . 4 241 .

L. Dang , X.Y. Nai , D.H. Zhu , Y.W. Jing , X. Liu , Y.P. Dong , W. Li . . Appl. Surf. Sci. , 2014 . 317 325 DOI: 10.1016/j.apsusc.2014.07.205 http://doi.org/10.1016/j.apsusc.2014.07.205 .

Q.X. Zhang , Z.Z. Yu , X.L. Xie , Y.W. Mai . . Polymer , 2004 . 45 5985 DOI: 10.1016/j.polymer.2004.06.044 http://doi.org/10.1016/j.polymer.2004.06.044 .

L.P. Li , J.L. Wei , B. Yin , M.B. Yang . . J. Appl. Polym. Sci. , 2012 . 123 3652 DOI: 10.1002/app.v123.6 http://doi.org/10.1002/app.v123.6 .

J.G. Tang , Y. Wang , H.Y. Liu , L.A. Belfiore . . Polymer , 2004 . 45 2081 DOI: 10.1016/j.polymer.2003.11.046 http://doi.org/10.1016/j.polymer.2003.11.046 .

D. Binias , W. Binias , J. Broda . . J. Appl. Polym. Sci. , 2012 . 125 1020 DOI: 10.1002/app.v125.2 http://doi.org/10.1002/app.v125.2 .

B.Y. Wen , B.B. Ji . . J. Appl. Polym. Sci. , 2012 . 124 138 DOI: 10.1002/app.35090 http://doi.org/10.1002/app.35090 .

A.R. Zeng , Y.Y. Zheng , Y. Guo , S.C. Qiu , L. Cheng . . Mater. Design , 2012 . 34 691 DOI: 10.1016/j.matdes.2011.05.028 http://doi.org/10.1016/j.matdes.2011.05.028 .

E. Bahar , N. Ucar , A. Onen , Y.J. Wang , M. Oksüz , O. Ayaz , M. Ucar , A. Demir . . J. Appl. Polym. Sci. , 2012 . 125 2882 DOI: 10.1002/app.v125.4 http://doi.org/10.1002/app.v125.4 .

S. Iwamoto , S. Yamamoto , S.H. Lee , T. Endo . . Compos. Part A-Appl. S. , 2014 . 59 26 DOI: 10.1016/j.compositesa.2013.12.011 http://doi.org/10.1016/j.compositesa.2013.12.011 .

A. Patti , R. Barretta , F.M.D. Sciarra , G. Mensitieri , C. Menna , P. Russo . . Compos. Struct. , 2015 . 131 282 DOI: 10.1016/j.compstruct.2015.05.002 http://doi.org/10.1016/j.compstruct.2015.05.002 .

Li, W. , "Inorganic whiskers" (in Chinese), Chemical Industry Press, Beijing, 2005, p. 100

W.C.J. Zuiderduin , C. Westzaan , J. Huetink , R.J. Gaymans . . Polymer , 2003 . 44 261 DOI: 10.1016/S0032-3861(02)00769-3 http://doi.org/10.1016/S0032-3861(02)00769-3 .

H.S. Kim , S. Kim , H.J. Kim , H.S. Yang . . Thermochim. Acta , 2006 . 451 181 DOI: 10.1016/j.tca.2006.09.013 http://doi.org/10.1016/j.tca.2006.09.013 .

R.T. Zeng , W. Hu , M. Wang , S.D. Zhang , J.B. Zeng . . Polym. Test. , 2016 . 50 182 DOI: 10.1016/j.polymertesting.2016.01.003 http://doi.org/10.1016/j.polymertesting.2016.01.003 .

M.L. Aranguren , E. Mora , J.V. Degroot , C.W. Macosko . . J. Rheol. , 1992 . 36 1165 DOI: 10.1122/1.550306 http://doi.org/10.1122/1.550306 .

S.H.P. Bettini , Miranda Josefovich M.P. de , P.A.R. Munoz , C. Lotti , L.H.C. Mattoso . . Carbohyd. Polym. , 2013 . 94 800 DOI: 10.1016/j.carbpol.2013.01.080 http://doi.org/10.1016/j.carbpol.2013.01.080 .

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Simultaneous Improvement of Strength and Toughness of Poly(lactic acid) via Multiple Dynamic Pressure

Synchronously Enhancing Crystallization Ability and Mechanical Properties of the Polylactide Film via Incorporating Stereocomplex Crystallite Fibers

Structural Optimization of Polyimide Foam via Composition with Hyperbranched Polymer Modified Fluorinated Carbon Nanotubes

Alternating Poly(ether-alt-ester)s with High Glass Transition Temperature Enabled by Rotationally Constrained Biaryl Units

Epoxy-functionalized Cyclohexane-based Ricinoleate Plasticizer: Synthesis, Performance Evaluation, and Plasticizing Mechanism