a.Key Laboratory of Ministry of Education for Electronic Equipment Structure Design, Xidian University, Xi'an 710071, China
b.Department of Applied Chemistry, Northwestern Polytehnical University, Xi'an 710129, China
c.Department of Polymer materials and Engineering, College of Material Science and Engineering, North China University of Science and Technology, Tangshan 063009, China
Yong-kun Wang(王永坤),E-mail:ykwang@xidian.edu.cn
收稿:2016-04-20,
修回:2016-5-12,
录用:2016-5-19,
纸质出版:2016-11
Scan QR Code
Yong-kun Wang, Wen-chao Tian, Guang-ming Zhu, 等. Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites[J]. Chinese Journal of Polymer Science, 2016,34(11):1354-1362.
Yong-kun Wang, Wen-chao Tian, Guang-ming Zhu, et al. Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites[J]. Chinese Journal of Polymer Science, 2016, 34(11): 1354-1362.
Yong-kun Wang, Wen-chao Tian, Guang-ming Zhu, 等. Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites[J]. Chinese Journal of Polymer Science, 2016,34(11):1354-1362. DOI: 10.1007/s10118-016-1838-9.
Yong-kun Wang, Wen-chao Tian, Guang-ming Zhu, et al. Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites[J]. Chinese Journal of Polymer Science, 2016, 34(11): 1354-1362. DOI: 10.1007/s10118-016-1838-9.
A thermally triggered shape memory polymer composite was prepared by blending short carbon fiber (SCF) into a blend of poly(styrene-
b
-butadiene-
b
-styrene) triblock copolymer (SBS)/linear low density polyethylene (LLDPE) prior to curing. These composites have excellent processability compared with other thermosets. The dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) were investigated to assess the thermomechanical properties of the SCF/SBS/LLDPE composite. Scanning electron microscope (SEM) imaging of the samples was performed to show the distribution of the SCF in the composite. The study specifically focused on the effect of SCF on the shape memory behavior of the SCF/SBS/LLDPE composite. The results indicated that the large amount of SCF significantly improved the mechanical property of the polymer composites while not damaging the shape memory performance. The SCF/SBS/LLDPE composites exhibited excellent shape memory behavior when the SCF content was less than 15.0 wt%. Moreover
the shape fixity ratio and shape recovery time of the SCF/SBS/LLDPE composites increased with the SCF content.
Y.K. Wang, , G.M. Zhu, , X.P. Cui, , T.T. Liu, , Z. Liu, , K. Wang, . . Colloid Polym. Sci. , 2014 . 292 ( 9 ): 2311 DOI: 10.1007/s00396-014-3266-0 http://doi.org/10.1007/s00396-014-3266-0 .
Y.K. Wang, , G.M. Zhu, , T.S. Tang, , J.Q. Xie, , T.T. Liu, , Z. Liu, . . J. Polym. Res. , 2014 . 21 ( 4 ): 2 .
Y.K. Wang, , G.M. Zhu, , T.S. Tang, , T.T. Liu, , J.Q. Xie, , F. Ren, . . J. Appl. Polym. Sci. , 2014 . 13 ( 17 ): 40691 .
Y.K. Wang, , G.M. Zhu, , J.Q. Xie, , Q.N. Men, , T.T. Liu, , F. Ren, . . J. Polym. Res. , 2014 . 21 ( 8 ): 515 DOI: 10.1007/s10965-014-0515-3 http://doi.org/10.1007/s10965-014-0515-3 .
Y.J. Liu, , H.B. Lv, , X. Lan, , J.S. Leng, , S.Y. Du, . . Compos. Sci. Technol. , 2009 . 69 ( 13 ): 2064 DOI: 10.1016/j.compscitech.2008.08.016 http://doi.org/10.1016/j.compscitech.2008.08.016 .
Q. Zhao, , H.J. Qi, , T. Xie, . . Prog. Polym. Sci. , 2015 . 49 80 .
W.M. Zhen, , Y. Zhao, , C.C. Wang, , Z. Ding, , H. Purnawali, , C. Tang, , J.L. Zhang, . . J. Polym. Res. , 2012 . 19 ( 9 ): 9952 DOI: 10.1007/s10965-012-9952-z http://doi.org/10.1007/s10965-012-9952-z .
C. Liu, , H. Qin, , P.T. Mather, . . J. Mater. Chem. , 2007 . 17 ( 16 ): 1544 .
N. Zheng, , G.Q. Fang, , Z.L. Cao, , Q. Zhao, , T. Xie, . . Polym. Chem-UK. , 2015 . 6 ( 16 ): 3048 .
C.C. Wang, , W.M. Huang, , Z. Ding, , Y. Zhao, , H. Purnawali, . . Compos. Sci. Technol. , 2012 . 72 ( 10 ): 1178 DOI: 10.1016/j.compscitech.2012.03.027 http://doi.org/10.1016/j.compscitech.2012.03.027 .
R. Bijiu, , C.P.R. Nair, . . J. Polym. Res. , 2013 . 20 ( 2 ): 82 DOI: 10.1007/s10965-013-0082-z http://doi.org/10.1007/s10965-013-0082-z .
W. Voit, , T. Ware, , K. Gall, . . Polymer , 2010 . 51 ( 15 ): 3555 .
J.N. Zhang, , Y.M. Ma, , J.J. Zhang, , D. Xu, , Q.L. Yang, , J.G. Guan, , X.Y. Cao, , L. Jiang, . . Mater. Lett. , 2011 . 65 ( 23 ): 3639 .
H.B. Lv, , K. Yu, , S.H. Sun, , Y.J. Liu, , J.S. Leng, . . Polym. Int. , 2010 . 59 ( 6 ): 766 .
X. Lan, , Y.J. Liu, , H.B. Lv, , X.H. Wang, , J.S. Leng, , S.Y. Du, . . Smart. Mater. Struct. , 2009 . 18 ( 2 ): 024002 DOI: 10.1088/0964-1726/18/2/024002 http://doi.org/10.1088/0964-1726/18/2/024002 .
W.S Guo, , Z.L. Shen, , B.C. Guo, , L.Q. Zhang, , D. Jia, . . Polymer , 2014 . 55 ( 16 ): 4328 .
W.X. Wang, , D.Y. Liu, , Y.J. Liu, , J.S. Leng, , D. Bhattacharyya, . . Compos. Sci. Technol. , 2015 . 106 22 .
B.K. Kim, , S.Y. Lee, , M. Xu, . . Polymer , 1996 . 37 ( 26 ): 5789 .
M. Amirian, , A.N. Chakoli, , J.H. Sui, , W. Cai, . . J. Polym. Res. , 2012 . 19 ( 2 ): 9777 DOI: 10.1007/s10965-011-9777-1 http://doi.org/10.1007/s10965-011-9777-1 .
T. Ohki, , Q.Q. Ni, , N. Ohsako, , M. Lwamoto, . . Compos. Part A-Appl. S. , 2004 . 35 ( 9 ): 1069 .
0
浏览量
4
Downloads
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802046900号