a. Department of Materials Science and Technology, Faculty of Science, Prince of Songkla University, Hatyai, Songkhla 90112, Thailand
b. Bioplastic Research Unit, Department of Materials Science and Technology, Faculty of Science, Prince of Songkla University, Hatyai, Songkhla 90112, Thailand
c. Department of Chemistry, Faculty of Science, Prince of Songkla University, Hatyai, Songkhla 90112, Thailand
Worasak Phetwarotai,E-mail:w.phetwarotai@hotmail.com,worasak.ph@psu.ac.th
收稿:2016-03-13,
修回:2016-4-19,
录用:2016-4-19,
纸质出版:2016-10-05
Scan QR Code
Phetwarotai Worasak, Tanrattanakul Varaporn, Phusunti Neeranuch. Synergistic Effect of Nucleation and Compatibilization on the Polylactide and Poly(butylene adipate-
Phetwarotai Worasak, Tanrattanakul Varaporn, Phusunti Neeranuch. Synergistic Effect of Nucleation and Compatibilization on the Polylactide and Poly(butylene adipate-
Phetwarotai Worasak, Tanrattanakul Varaporn, Phusunti Neeranuch. Synergistic Effect of Nucleation and Compatibilization on the Polylactide and Poly(butylene adipate-
Phetwarotai Worasak, Tanrattanakul Varaporn, Phusunti Neeranuch. Synergistic Effect of Nucleation and Compatibilization on the Polylactide and Poly(butylene adipate-
Polylactide (PLA) films blended with 10 wt% poly(butylene adipate-
co
-terephthalate) (PBAT) were prepared by using a twin screw extruder in the presence of the nucleating agent of titanium dioxide (TiO
2
) and the compatibilizers of toluene diisocyanate (TDI) and PLA-grafted-maleic anhydride (PLA-
g
-MA). The synergistic effect of the nucleation and compatibilization on the properties and crystallization behavior of the PLA/PBAT (PLB) films was explored. The results showed that the addition of TiO
2
significantly enhanced the tensile strength and the impact tensile resistance of the PLB films while slightly decreased its thermal stability. In addition
the compatibilizers of TDI and PLA-
g
-MA in the system not only affected the crystallinity and cold crystallization process of the PLB films
but also increased the mechanical properties of them due to the improvement of the interfacial interaction between PLA and PBAT revealed by the morphological measurement. The synergistic effects of the nucleating agent and the compatibilizer afforded the blend films with increased tensile strength and impact tensile toughness
improved cold crystallization property and
c
c
.
X. Shi, , G..Phuong, T.V Zhang, , A. Lazzeri, . Molecules , 2015 . 20 1579 DOI: 10.3390/molecules20011579 http://doi.org/10.3390/molecules20011579 .
A.K. Mohapatra, , S Mohanty, , S.K., J. Nayak, . Polym. Environ. , 2014 . 22 398 DOI: 10.1007/s10924-014-0639-x http://doi.org/10.1007/s10924-014-0639-x .
Y. Wang, , S.M..Hung, T.F Chiao, , S.Y. Yang, . J. Appl. Polym. Sci. , 2012 . 125 ( Suppl. 2 ): E402 .
J. Ren, , H. Fu, , T Ren, , W. Yuan, . Carbohyd. Polym. , 2009 . 77 576 DOI: 10.1016/j.carbpol.2009.01.024 http://doi.org/10.1016/j.carbpol.2009.01.024 .
D.Y. Lee, , S.H. Lee, , M.S..Namc, J.D Cho, , Y. Lee, . Polym. Int. , 2015 . 64 581 DOI: 10.1002/pi.2015.64.issue-4 http://doi.org/10.1002/pi.2015.64.issue-4 .
I. Pillin, , Montrelay , N , Y. Grohens, . Polymer , 2006 . 47 ( 13 ): 4676 DOI: 10.1016/j.polymer.2006.04.013 http://doi.org/10.1016/j.polymer.2006.04.013 .
T. Kijchavengkul, , R. Auras, , M. Rubino, , S..Ngouajio, M Selke, , R.T. Fernandez, . Polym. Degrad. Stab. , 2010 . 95 2641 DOI: 10.1016/j.polymdegradstab.2010.07.018 http://doi.org/10.1016/j.polymdegradstab.2010.07.018 .
B. Liu, , S. Bhaladhare, , P. Zhan, , L Jiang, , J. Zhang, . Ind. Eng. Chem. Res. , 2011 . 50 13859 DOI: 10.1021/ie2017948 http://doi.org/10.1021/ie2017948 .
A Buzarovska, , A. Grozdanov, . J. Appl. Polym. Sci. , 2012 . 123 ( 4 ): 2187 DOI: 10.1002/app.34729 http://doi.org/10.1002/app.34729 .
H. Xiu, , H.W. Bai, , C.M. Huang, , C.L. Xu, , X.Y Li, , Q. Fu, . Express. Polym. Lett. , 2013 . 7 ( 3 ): 261 DOI: 10.3144/expresspolymlett.2013.24 http://doi.org/10.3144/expresspolymlett.2013.24 .
C.Z. Man, , C.M. Zhang, , Y.M. Liu, , W.W. Wang, , W.Y. Ren, , L. Jiang, , F. Reisdorffer, , T.P Nguyen, , Y. Dan, . Polym. Degrad. Stab. , 2012 . 97 ( 6 ): 856 DOI: 10.1016/j.polymdegradstab.2012.03.039 http://doi.org/10.1016/j.polymdegradstab.2012.03.039 .
Y.F. Zhu, , G.G. Buonocore, , M Lavorgna, , L. Ambrosio, . Polym. Compos. , 2011 . 32 ( 4 ): 519 DOI: 10.1002/pc.v32.4 http://doi.org/10.1002/pc.v32.4 .
B.U. Nam, , K.D Min, , Y. Son, . Mater. Lett. , 2015 . 150 118 DOI: 10.1016/j.matlet.2015.03.019 http://doi.org/10.1016/j.matlet.2015.03.019 .
J.J. Hwang, , S.M. Huang, , H.J. Liu, , H.C. Chu, , L.H Lin, , C.S. Chung, . J. Appl. Polym. Sci. , 2012 . 124 2216 DOI: 10.1002/app.v124.3 http://doi.org/10.1002/app.v124.3 .
Y. Wang, , S.M. Chiao, , T.F Hung, , S.Y. Yang, . J. Appl. Polym. Sci. , 2012 . 125 E402 DOI: 10.1002/app.36920 http://doi.org/10.1002/app.36920 .
H.W. Xiao, , P. Li, , X. Ren, , T Jiang, , Y.J. Taut, . J. Appl. Polym. Sci. , 2010 . 118 3558 DOI: 10.1002/app.32728 http://doi.org/10.1002/app.32728 .
H.T Liao, , C.S. Wu, . Mat. Sci. Eng. A- Struct. , 2009 . 515 207 DOI: 10.1016/j.msea.2009.03.003 http://doi.org/10.1016/j.msea.2009.03.003 .
B.Y. Jo, G.S. Shin, , B.S. Kim, , K.H Hong, , B.H. Cho, . Appl. Chem. , 2006 . 10 77 .
W.Y. Jang, , B.Y. Shin, , T.J Lee, , R. Narayan, . J. Ind. Eng. Chem. , 2007 . 13 457 .
J.F Zhang, , X. Sun, . J. Appl. Polym. Sci. , 2014 . 94 1697 .
H. Wang, , X Sun, , P. Seib, . J. Polym. Environ. , 2002 . 10 133 DOI: 10.1023/A:1021139903549 http://doi.org/10.1023/A:1021139903549 .
W. Phetwarotai, , P Potiyaraj, , D. Aht-Ong, . J. Appl. Polym. Sci. , 2010 . 116 2305 .
L.C. Arruda, , M. Magaton, , R.E.S Bretas, , M.M. Ueki, . Polym. Test. , 2015 . 43 27 DOI: 10.1016/j.polymertesting.2015.02.005 http://doi.org/10.1016/j.polymertesting.2015.02.005 .
D. Carson, , L. Nie, , R Narayan, , P. Dubois, . J. Appl. Polym. Sci. , 1999 . 72 477 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
D. Plackett, . J. Polym. Environ. , 2014 . 12 131 .
H Li, , M.A. Huneault, . J. Appl. Polym. Sci. , 2011 . 122 134 DOI: 10.1002/app.v122.1 http://doi.org/10.1002/app.v122.1 .
R. AL-Itry, , K Lamnawar, , A. Maazouz, . Polym. Degrad. Stab. , 2012 . 97 1898 DOI: 10.1016/j.polymdegradstab.2012.06.028 http://doi.org/10.1016/j.polymdegradstab.2012.06.028 .
A.K. Mohapatra, , S Mohanty, , S.K. Nayak, . J. Polym. Environ. , 2014 . 22 ( 3 ): 398 DOI: 10.1007/s10924-014-0639-x http://doi.org/10.1007/s10924-014-0639-x .
Arends, C.B., "Polymer toughening", Marcel Dekker, New York, 1996
X. Zhang, , F. Xie, , Z Pen, , Y. Zhang, . Eur. Polym. J. , 2002 . 38 1 DOI: 10.1016/S0014-3057(01)00182-3 http://doi.org/10.1016/S0014-3057(01)00182-3 .
J. Zhang, , K. Tashiro, , H Tsuji, , A.J. Domb, . Macromolecules , 2008 . 41 1352 DOI: 10.1021/ma0706071 http://doi.org/10.1021/ma0706071 .
P. Pan, , W. Kai, , B. Zhu, , T Dong, , Y. Inoue, . Macromolecules , 2007 . 40 6898 DOI: 10.1021/ma071258d http://doi.org/10.1021/ma071258d .
D. Battegazzore, , S Bocchini, , A. Frache, . Express. Polym. Lett. , 2011 . 5 ( 10 ): 849 DOI: 10.3144/expresspolymlett.2011.84 http://doi.org/10.3144/expresspolymlett.2011.84 .
T. Tábi, , I.E Sajó, , F. Szabó, . Express. Polym. Lett. , 2010 . 4 ( 10 ): 659 DOI: 10.3144/expresspolymlett.2010.80 http://doi.org/10.3144/expresspolymlett.2010.80 .
W. Phetwarotai, , P Potiyaraj, , D. Aht-Ong, . J. Appl. Polym. Sci. , 2012 . 126 E162 DOI: 10.1002/app.36736 http://doi.org/10.1002/app.36736 .
Wu, S., "Polymer interface and adhesion”, Marcel Dekker, New York, 1982
0
浏览量
5
Downloads
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802046900号