Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate

Feng Li-dong; Xiang Sheng; Sun Bin; Liu Yan-long; Sun Zhi-qiang; Bian Xin-chao; Li Gao; Chen Xue-si

doi:10.1007/s10118-016-1822-4

Your Location：

Home >

Browse articles >

Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate

PAPERS | Updated：2021-05-12

- Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate
- Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate
- Chinese Journal of Polymer Science 2016年34卷第9期页码：1070-1078
- Affiliations：
  
  Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
- Author bio：
  
  Xin-chao Bian(边新超),E-mail:xcbian@ciac.ac.cn
  Xue-si Chen(陈学思),E-mail:xschen@ciac.ac.cn
- Funds：
  
  he National Natural Science Foundation of China(Nos. 51573178, 51390480,51203155, 51403199 and 51303176);the National High Technology Research and Development Program ("863" Program) of China(No. 2015AA034004)
- DOI：10.1007/s10118-016-1822-4
  中图分类号：
- 收稿：2016-03-29，
  
  修回：2016-4-24，
  
  录用：2016-4-24，
  
  纸质出版：2016-10-05
- Accepted：
Scan QR Code
Feng Li-dong, Xiang Sheng, Sun Bin, 等. Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate[J]. Chinese Journal of Polymer Science, 2016,34(9):1070-1078.

Feng Li-dong, Xiang Sheng, Sun Bin, et al. Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate[J]. Chinese Journal of Polymer Science, 2016, 34(9): 1070-1078.
Feng Li-dong, Xiang Sheng, Sun Bin, 等. Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate[J]. Chinese Journal of Polymer Science, 2016,34(9):1070-1078. DOI： 10.1007/s10118-016-1822-4.

Feng Li-dong, Xiang Sheng, Sun Bin, et al. Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate[J]. Chinese Journal of Polymer Science, 2016, 34(9): 1070-1078. DOI： 10.1007/s10118-016-1822-4.

摘要

Abstract

Poly(ether urethane)s (PEU)

including PEUI15 and PEUH15

were prepared through chain-extension reaction of poly(ethylene glycol) (PEG-1500) using diisocyanate as a chain extender

including isophorone diisocyanate (IPDI) and hexamethylene diisocyanate (HDI). These PEUs were used to toughen polylactide (PLA) by physical and reactive blending. Thermal

morphological

mechanical and aging properties of the blends were investigated in detail. These PEUs were partially compatible with PLA. The elongation at break of the reactive blends in the presence of triphenyl phosphate (TPP) for PLA with PEUH15 or PEUI15 was much higher than that of the physical blends. The aging test was carried out at-20℃ for 50h in order to accelerate the crystallization of PEUs. The PEUs in the PLA/PEU blends produced crystallization and formed new phase separation with PLA

resulting in the declined toughness of blends. Fortunately

under the aging condition

although PEUH15 in blends could also form crystallization

the reactive blend of PLA/PEUH15/TPP(80/20/2) had higher toughness than the other blends. The elongation at break of PLA/PEUH15/TPP(80/20/2) dropped to 287% for the aging blend from 350% for the original blend. The tensile strength and modulus of PLA/PEUH15/TPP blend did not change obviously because of the crystallization of PEUH15.

关键词

Keywords

references

R Datta, , M. Henry, . J. Chem. Technol. Biotechnol. , 2006 . 81 ( 7 ): 1119 DOI: 10.1002/(ISSN)1097-4660 http://doi.org/10.1002/(ISSN)1097-4660 .

C.J. Weber, , V. Haugaard, , R Festersen, , G. Bertelsen, . Food Addit. Contam. , 2002 . 19 ( S ): 172 .

K Kimura, , Y. Horikoshi, . Fujitsu Sci. Tech. J. , 2005 . 41 ( 2 ): 173 .

S. Serizawa, , K Inoue, , M. Iji, . J. Appl. Polym. Sci. , 2006 . 100 ( 1 ): 618 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

M. Sheth, , R.A. Kumar, , V. Dave, , R.A Gross, , S.P. McCarthy, . J. Appl. Polym. Sci. , 1997 . 66 ( 8 ): 1495 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

M. Baiardo, , G. Frisoni, , M. Scandola, , M. Rimelen, , D. Lips, , K Ruffieux, , E. Wintermantel, . J. Appl. Polym. Sci. , 2003 . 90 ( 7 ): 1731 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

O Martin, , L. Avérous, . Polymer , 2001 . 42 ( 14 ): 6209 DOI: 10.1016/S0032-3861(01)00086-6 http://doi.org/10.1016/S0032-3861(01)00086-6 .

Y. Hu, , Y. S. Hu, , V. Topolkaraev, , A Hiltner, , E. Baer, . Polymer , 2003 . 44 ( 19 ): 5681 DOI: 10.1016/S0032-3861(03)00609-8 http://doi.org/10.1016/S0032-3861(03)00609-8 .

Y. Hu, , M. Rogunova, , V. Topolkaraev, , A Hiltner, , E. Baer, . Polymer , 2003 . 44 ( 19 ): 5701 DOI: 10.1016/S0032-3861(03)00614-1 http://doi.org/10.1016/S0032-3861(03)00614-1 .

Y. Hu, , Y.S. Hu, , V. Topolkaraev, , A Hiltner, , E. Baer, . Polymer , 2003 . 44 ( 19 ): 5711 DOI: 10.1016/S0032-3861(03)00615-3 http://doi.org/10.1016/S0032-3861(03)00615-3 .

Z Kulinski, , E. Piorkowska, . Polymer , 2005 . 46 ( 23 ): 10290 DOI: 10.1016/j.polymer.2005.07.101 http://doi.org/10.1016/j.polymer.2005.07.101 .

L.D. Feng, , X.C. Bian, , Z.M. Chen, , G Li, , X.S. Chen, . Polym. Degrad. Stab. , 2013 . 98 ( 9 ): 1591 DOI: 10.1016/j.polymdegradstab.2013.06.025 http://doi.org/10.1016/j.polymdegradstab.2013.06.025 .

Y. Deng, , S.Q. Li, , J.B. Zhao, , Z.Y. Zhang, , J.Y Zhang, , W.T. Yang, . Chinese J. Polym. Sci. , 2015 . 33 ( 6 ): 880 DOI: 10.1007/s10118-015-1638-7 http://doi.org/10.1007/s10118-015-1638-7 .

N.J. Song, , X. Jiang, , J.H. Li, , Y. Pang, , J.S. Li, , H Tan, , Q. Fu, . Chinese J. Polym. Sci. , 2013 . 31 ( 10 ): 1451 DOI: 10.1007/s10118-013-1315-7 http://doi.org/10.1007/s10118-013-1315-7 .

R.L. Yu, , L.S. Zhang, , Y.H. Feng, , R.Y Zhang, , J. Zhu, . Chinese J. Polym. Sci. , 2014 . 32 ( 8 ): 1099 DOI: 10.1007/s10118-014-1487-9 http://doi.org/10.1007/s10118-014-1487-9 .

Q. Xing, , R.B. Li, , X. Dong, , X.Q. Zhang, , L.Y Zhang, , D.J. Wang, . Chinese J. Polym. Sci. , 2015 . 33 ( 9 ): 1294 DOI: 10.1007/s10118-015-1679-y http://doi.org/10.1007/s10118-015-1679-y .

L.D. Feng, , X.C. Bian, , Y. Cui, , Z.M. Chen, , G Li, , X.S. Chen, . Macromol. Chem. Phys. , 2013 . 214 ( 7 ): 824 DOI: 10.1002/macp.v214.7 http://doi.org/10.1002/macp.v214.7 .

A.J. Nijenhuis, , E. Colstee, , D.W Grijpma, , A.J. Pennings, . Polymer , 1996 . 37 ( 26 ): 5849 DOI: 10.1016/S0032-3861(96)00455-7 http://doi.org/10.1016/S0032-3861(96)00455-7 .

L.D. Feng, , X.C. Bian, , G. Li, , Z.M. Chen, , Y Cui, , X.S. Chen, . Polym. Test. , 2013 . 32 ( 8 ): 1368 DOI: 10.1016/j.polymertesting.2013.08.015 http://doi.org/10.1016/j.polymertesting.2013.08.015 .

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Improvement in Toughness of Polylactide by Melt Blending with Bio-based Poly(ester)urethane

MAGNOLOL ENTRAPPED ULTRA-FINE FIBROUS MATS ELECTROSPUN FROM POLY(ETHYLENE GLYCOL)-b-POLY(L-LACTIDE) AND IN VITRO RELEASE

Multifunctional Polyurethane with High Strength, Toughness, and Self-healing Capacity via Tannic Acid-modified Cellulose Nanocrystals

Phase Structure Formed by Rubber and Rigid Particles in a Polymer and Its Effect on the Composite Rigidity and Toughness

Epoxy-functionalized Cyclohexane-based Ricinoleate Plasticizer: Synthesis, Performance Evaluation, and Plasticizing Mechanism