Effects of Electrically Inert Fillers on the Properties of Poly(<italic style="font-style: italic">m</italic>-xylene adipamide)/Multiwalled Carbon Nanotube Composites

Bo-yuan Zhang; Qiu-shi Ge; Zhao-xia Guo; Jian Yu

doi:10.1007/s10118-016-1821-5

Your Location：

Home >

Browse articles >

Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites

PAPERS | Updated：2021-05-12

- Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites
- Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites
- Chinese Journal of Polymer Science 2016年34卷第8期页码：1032-1038
- Affiliations：
  
  Key Laboratory of Advanced Materials(MOE), Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
- Author bio：
  
  Zhao-xia Guo (郭朝霞), E-mail: guozx@mail.tsinghua.edu.cn
  Jian Yu (于建), E-mail: yujian03@mail.tsinghua.edu.cn
- Funds：
- DOI：10.1007/s10118-016-1821-5
  中图分类号：
- 收稿：2016-03-04，
  
  修回：2016-3-29，
  
  录用：2016-3-29，
  
  纸质出版：2016-08
- Accepted：
Scan QR Code
Bo-yuan Zhang, Qiu-shi Ge, Zhao-xia Guo, 等. Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites[J]. Chinese Journal of Polymer Science, 2016,34(8):1032-1038. DOI: 10.1007/s10118-016-1821-5.

Bo-yuan Zhang, Qiu-shi Ge, Zhao-xia Guo, et al. Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites[J]. Chinese Journal of Polymer Science, 2016, 34(8): 1032-1038. DOI: 10.1007/s10118-016-1821-5.
Bo-yuan Zhang, Qiu-shi Ge, Zhao-xia Guo, 等. Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites[J]. Chinese Journal of Polymer Science, 2016,34(8):1032-1038. DOI: 10.1007/s10118-016-1821-5. DOI：

Bo-yuan Zhang, Qiu-shi Ge, Zhao-xia Guo, et al. Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites[J]. Chinese Journal of Polymer Science, 2016, 34(8): 1032-1038. DOI: 10.1007/s10118-016-1821-5. DOI：

摘要

Abstract

The effects of three types of electrically-inert fillers

calcium carbonate (CaCO

)

talc and glass fiber (GF)

on electrical resistivity

crystallization behavior and dynamic mechanical properties of poly(

-xylene adipamide) (MXD6)/multiwalled carbon nanotube (MWCNT) composites are investigated. The electrical resistivity of MXD6/MWCNT composites is significantly reduced with the addition of inert fillers due to the volume-exclusion effect that leads to increased effective concentration of MWCNTs in MXD6 matrix and also due to improved MWCNT dispersion. The crystallization temperature of MXD6 increases with the addition of MWCNTs

indicating that MWCNTs can act as nucleating agent and induce crystallization of MXD6. The incorporation of inert fillers has no further effect on crystallization behavior of MXD6

but significantly improves the storage modulus of MXD6/MWCNT composite

demonstrating that CaCO

talc and GF filled MXD6/MWCNT composites are very promising materials with not only improved electrical property but also excellent mechanical properties.

关键词

Keywords

references

Z. Spitalsky , D. Tasis , K. Papagelis , C. Galiotis . . Prog. Polym. Sci. , 2010 . 35 ( 3 ): 357 DOI: 10.1016/j.progpolymsci.2009.09.003 http://doi.org/10.1016/j.progpolymsci.2009.09.003 .

H. Deng , L. Lin , M.Z. Ji , S.M. Zhang , M.B. Yang , Q. Fu . . Prog. Polym. Sci. , 2014 . 39 ( 4 ): 627 DOI: 10.1016/j.progpolymsci.2013.07.007 http://doi.org/10.1016/j.progpolymsci.2013.07.007 .

Z. Han , A. Fina . . Prog. Polym. Sci. , 2011 . 36 ( 7 ): 914 DOI: 10.1016/j.progpolymsci.2010.11.004 http://doi.org/10.1016/j.progpolymsci.2010.11.004 .

J.N. Coleman , U. Khan , W.J. Blau , Y.K. Gun'ko . . Carbon , 2006 . 44 ( 9 ): 1624 DOI: 10.1016/j.carbon.2006.02.038 http://doi.org/10.1016/j.carbon.2006.02.038 .

I. Alig , P. Pötschke , D. Lellinger , T. Skipa , S. Pegel , G.R. Kasaliwal , T. Villmow . . Polymer , 2012 . 53 ( 1 ): 4 DOI: 10.1016/j.polymer.2011.10.063 http://doi.org/10.1016/j.polymer.2011.10.063 .

N. Grossiord , J. Loos , O. Regev , C.E. Koning . . Chem. Mater. , 2006 . 18 ( 5 ): 1089 DOI: 10.1021/cm051881h http://doi.org/10.1021/cm051881h .

H.D. Bao , Z.X. Guo , J. Yu . . Polymer , 2008 . 49 ( 17 ): 3826 DOI: 10.1016/j.polymer.2008.06.024 http://doi.org/10.1016/j.polymer.2008.06.024 .

B.Y. Zhang , F. Xin , Z.X. Guo , J. Yu . . Acta Polymerica Sinica (in Chinese) , 2012 . ( 2 ): 174 .

C.R. Yu , D.M. Wu , Y. Liu , H. Qiao , Z.Z. Yu , A. Dasari , X.S. Du , Y.W. Mai . . Compos. Sci. Technol. , 2011 . 71 ( 15 ): 1706 DOI: 10.1016/j.compscitech.2011.07.022 http://doi.org/10.1016/j.compscitech.2011.07.022 .

Z.Y. Xiong , B.Y. Zhang , L. Wang , J. Yu , Z.X. Guo . . Carbon , 2014 . 70 233 DOI: 10.1016/j.carbon.2014.01.001 http://doi.org/10.1016/j.carbon.2014.01.001 .

L. Liu , J.C. Grunlan . . Adv. Funct. Mater. , 2007 . 17 ( 14 ): 2343 DOI: 10.1002/(ISSN)1616-3028 http://doi.org/10.1002/(ISSN)1616-3028 .

M.T. Müller , J. Dreyße , L. Häußler , B. Krause , P. Pötschke . . J. Polym. Sci., Part B:Polym. Phys. , 2013 . 51 ( 23 ): 1680 DOI: 10.1002/polb.v51.23 http://doi.org/10.1002/polb.v51.23 .

Y. Sun , H.D. Bao , Z.X. Guo , J. Yu . . Macromolecules , 2008 . 42 ( 1 ): 459 .

Z.Y. Xiong , L. Wang , Y. Sun , Z.X. Guo , J. Yu . . Polymer , 2013 . 54 ( 1 ): 447 DOI: 10.1016/j.polymer.2012.11.044 http://doi.org/10.1016/j.polymer.2012.11.044 .

B.B. Doudou , E. Dargent , J. Grenet . . J. Therm. Anal. Calorim. , 2006 . 85 ( 2 ): 409 DOI: 10.1007/s10973-005-7299-y http://doi.org/10.1007/s10973-005-7299-y .

S. Naudy , L. David , C. Rochas , R. Fulchiron . . Polymer , 2007 . 48 ( 11 ): 3273 DOI: 10.1016/j.polymer.2007.03.076 http://doi.org/10.1016/j.polymer.2007.03.076 .

M. Fereydoon , S.H. Tabatabaei , A. Ajji . . Polym. Eng. Sci. , 2014 . 54 ( 11 ): 2617 DOI: 10.1002/pen.v54.11 http://doi.org/10.1002/pen.v54.11 .

M. Shibayama , K. Uenoyama , J.I. Oura , S. Nomura , T. Iwamoto . . Polymer , 1995 . 36 ( 25 ): 4811 DOI: 10.1016/00323-8619(59)92978- http://doi.org/10.1016/00323-8619(59)92978- .

V. Prattipati , Y.S. Hu , S. Bandi , D.A. Schiraldi , A. Hiltner , E. Baer , S. Mehta . . J. Appl. Polym. Sci. , 2005 . 97 ( 3 ): 1361 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

Y.S. Hu , V. Prattipati , S. Mehta , D.A. Schiraldi , A. Hiltner , E. Baer . . Polymer , 2005 . 46 ( 8 ): 2685 DOI: 10.1016/j.polymer.2005.01.056 http://doi.org/10.1016/j.polymer.2005.01.056 .

A. Ammala , S.J. Pas , K.A. Lawrence , R. Stark , R.I. Webb , A.J. Hill . . J. Mater. Chem. , 2008 . 18 ( 8 ): 911 DOI: 10.1039/b712875d http://doi.org/10.1039/b712875d .

K. Magniez , B.L. Fox , M.G. Looney . . J. Polym. Sci., Part B:Polym. Phys. , 2009 . 47 ( 13 ): 1300 DOI: 10.1002/polb.v47:13 http://doi.org/10.1002/polb.v47:13 .

H.D. Bao , Z.X. Guo , J. Yu . . Chinese J. Polym. Sci. , 2009 . 27 ( 3 ): 393 DOI: 10.1142/S0256767909004059 http://doi.org/10.1142/S0256767909004059 .

H.D. Bao , Y. Sun , Z.Y. Xiong , Z.X. Guo , J. Yu . . J. Appl. Polym. Sci. , 2013 . 128 ( 1 ): 735 DOI: 10.1002/app.37554 http://doi.org/10.1002/app.37554 .

Z.Q. Su , J.F. Li , Q. Li , T.Y. Ni , G. Wei . . Carbon , 2012 . 50 ( 15 ): 5605 DOI: 10.1016/j.carbon.2012.08.017 http://doi.org/10.1016/j.carbon.2012.08.017 .

P.P. Zhang , X. Zhao , X. Zhang , Y. Lai , X.T. Wang , J.F. Li , G. Wei , Z.Q. Su . . ACS Appl. Mater. Inter. , 2014 . 6 ( 10 ): 7563 DOI: 10.1021/am500908v http://doi.org/10.1021/am500908v .

Z.F. Ouyang , J.F. Li , J.H. Wang , Q. Li , T.Y. Ni , X.Y. Zhang , H.X. Wang , Q. Li , Z.Q. Su , G. Wei . . J. Mater. Chem. B , 2013 . 1 ( 18 ): 2415 DOI: 10.1039/c3tb20316f http://doi.org/10.1039/c3tb20316f .

L. Cao , D.F. Su , Z.Q. Su , X.N. Chen . . Ind. Eng. Chem. Res. , 2014 . 53 ( 6 ): 2308 DOI: 10.1021/ie403746p http://doi.org/10.1021/ie403746p .

L.S. Schadler , S.K. Kumar , B.C. Benicewicz , S.L. Lewis , S.E. Harton . . MRS Bull , 2007 . 32 ( 4 ): 335 DOI: 10.1557/mrs2007.232 http://doi.org/10.1557/mrs2007.232 .

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Flexible Mussel-inspired Hydrogel with Polyaniline and Polypyrrole for Transparent Wearable Strain Sensors: Investigation of Physical Properties, Self-healing, and Electrical Conductivity

Strategic Regulation of Carbon Nanotube Dispersion with Triblock Copolymer Phase Domains: Insights from Molecular Simulations

Regulation of Mechanical Properties of Conductive Polymer Composites

Control Aggregation of P3HT in Solution for High Efficiency Doping: Ensuring Structural Order and the Distribution of Dopants

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites

Effects of Electrically Inert Fillers on the Properties of Poly(m-xylene adipamide)/Multiwalled Carbon Nanotube Composites

DOI：10.1007/s10118-016-1821-5

摘要

Abstract

关键词

Keywords

references