Electroactive shape memory composites were synthesized using polybutadiene epoxy (PBEP) and bisphenol A type cyanate ester (BACE) filled with different contents of carbon black (CB). Dynamic mechanical analysis (DMA)
scanning electron microscopy (SEM)
electrical performance and electroactive shape memory behavior were systematically investigated. It is found that the volume resistivity decreased due to excellent electrical conductivity of CB
in turn resulting in good electroactive shape memory properties. The content of CB and applied voltage had significant influence on electroactive shape memory effect of developed BACE/PBEP/CB composites. Shape recovery can be observed within a few seconds with the CB content of 5 wt% and voltage of 60 V. Shape recovery time decreased with increasing content of CB and voltage. The infrared thermometer revealed that the temperature rises above the glass transition temperature faster with the increase of voltage and the decrease of resistance.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Static Flocculation in Carbon Black-filled Rubber: From Constrained Filler Motion to Polymer-driven Interfacial Reinforcement
Towards Efficient Electromagnetic Interference Shielding Performance for Polyethylene Composites by Structuring Segregated Carbon Black/Graphite Networks
Poly(ethylene terephthalate)/Carbon Black Composite Fibers Prepared by Electrospinning
SYNTHESIS AND CHARACTERIZATION OF FUNCTIONALIZED CARBON BLACK/POLY(VINYL ALCOHOL) HIGH REFRACTIVE INDEX NANOCOMPOSITES
PREPARATION AND PROPERTIES OF FUMED SILICA/CYANATE ESTER NANOCOMPOSITES
相关作者
Zhao-Yan Sun
Qian-Qian Gu
Ya-Fang Zheng
Hong-Guo Sun
Yuan Yin
Si-Yuan Chen
Jun-Lei Guan
Yu-Ge Wang
相关机构
State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences
School of Applied Chemistry and Engineering, University of Science and Technology of China
Center for Frontier Research & Technology, Hangzhou Zhongce Rubber Company
College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University
Key Laboratory of Advanced Materials (MOE), Department of Chemical Engineering, Tsinghua University