The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions
PAPER|Updated:2021-06-21
|
The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions
The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions
Chinese Journal of Polymer Science2015年33卷第11期 页码:1550-1561
Affiliations:
a.State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
b.University of Chinese Academy of Sciences, Beijing 100049, China
Author bio:
**Dong-hua Xu (许东华), E-mail: dhxu@ciac.ac.cn
Zhao-yan Sun (孙昭艳), E-mail: zysun@ciac.ac.cn
Funds:
National Natural Science Foundation of China(21474111;21222407;21274152);National Basic Research Program of China(2012CB821500)
Ran Niu, Jiang Gong, Dong-hua Xu, 等. The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions[J]. Chinese Journal of Polymer Science, 2015,33(11):1550-1561.
Ran Niu, Jiang Gong, Dong-hua Xu, et al. The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions[J]. Chinese Journal of Polymer Science, 2015, 33(11): 1550-1561.
Ran Niu, Jiang Gong, Dong-hua Xu, 等. The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions[J]. Chinese Journal of Polymer Science, 2015,33(11):1550-1561.DOI: 10.1007/s10118-015-1704-1.
Ran Niu, Jiang Gong, Dong-hua Xu, et al. The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions[J]. Chinese Journal of Polymer Science, 2015, 33(11): 1550-1561.DOI: 10.1007/s10118-015-1704-1.
The Effect of Particle Shape on the Structure and Rheological Properties of Carbon-based Particle Suspensions
The structure and rheological properties of carbon-based particle suspensions
i.e.
carbon black (CB)
multi-wall carbon nanotube (MWNT)
graphene and hollow carbon sphere (HCS) suspended in polydimethylsiloxane (PDMS)
are investigated. In order to study the effect of particle shape on the structure and rheological properties of suspensions
the content of surface oxygen-containing functional groups of carbon-based particles is controlled to be similar. Original spherical-like CB (fractal filler)
rod-like MWNT and sheet-like graphene form large agglomerates in PDMS
while spherical HCS particles disperse relatively well in PDMS. The dispersion state of carbon-based particles affects the critical concentration of forming a rheological percolation network. Under weak shear
negative normal stress differences (Δ
N
) are observed in CB
MWNT and graphene suspensions
while Δ
N
is nearly zero for HCS suspensions. It is concluded that the vorticity alignment of CB
MWNT and graphene agglomerates under shear results in the negative ΔN. However
no obvious structural change is observed in HCS suspension under weak shear
and accordingly
the ΔN is almost zero.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Stable Integration of Hydrophobic Silica Aerogels into Rubber Latex via Poly(vinyl alcohol)-assisted Aqueous Processing for Thermal Insulating Composites
Structural and Rheological Properties of PP/EPR/PE Alloys
Coalescence Suppression in Flowing Polymer Blends Using Silica Rods with Different Surface Chemistries
Special Topic: Chirality in Polymers
End-group and Side-chain Dual-engineering of Selenium-fused Acceptors for 20.08% Efficiency Polymer Solar Cells with Low Energy Loss
相关作者
Jian-Ming Zhang
Yan-Chun Han
Fang-Shuo Li
Jian-Chao Zhang
Quan Wang
Guo-Hui Yang
Miao Yu
Feng Wang
相关机构
Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology
School of Polymer Science and Engineering, Qingdao University of Science & Technology
University of Science and Technology of China
College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering of China, Sichuan University
Shandong Provincial Key Laboratory of Olefin Catalysis and Polymerization, Key Laboratory of Rubber-Plastics (Ministry of Education), School of Polymer Science and Engineering, Qingdao University of Science and Technology