Chun-hui Du, Xu-min Ma, Chun-jin Wu, 等. Polymerizable Ionic Liquid Copolymer P(MMA-co-BVIm-Br) and Its Effect on the Surface Wettability of PVDF Blend Membranes[J]. Chinese Journal of Polymer Science, 2015,33(6):857-868.
Chun-hui Du, Xu-min Ma, Chun-jin Wu, et al. Polymerizable Ionic Liquid Copolymer P(MMA-co-BVIm-Br) and Its Effect on the Surface Wettability of PVDF Blend Membranes[J]. Chinese Journal of Polymer Science, 2015, 33(6): 857-868. DOI: 10.1007/s10118-015-1634-y.
Chun-hui Du, Xu-min Ma, Chun-jin Wu, 等. Polymerizable Ionic Liquid Copolymer P(MMA-co-BVIm-Br) and Its Effect on the Surface Wettability of PVDF Blend Membranes[J]. Chinese Journal of Polymer Science, 2015,33(6):857-868.DOI: 10.1007/s10118-015-1634-y.
Chun-hui Du, Xu-min Ma, Chun-jin Wu, et al. Polymerizable Ionic Liquid Copolymer P(MMA-co-BVIm-Br) and Its Effect on the Surface Wettability of PVDF Blend Membranes[J]. Chinese Journal of Polymer Science, 2015, 33(6): 857-868. DOI: 10.1007/s10118-015-1634-y.DOI:
Polymerizable Ionic Liquid Copolymer P(MMA-co-BVIm-Br) and Its Effect on the Surface Wettability of PVDF Blend Membranes
-BVIm-Br) was synthesized by radical polymerization technique
and characterized by Fourier transform infrared spectrometry (FTIR)
1
H Nuclear magnetic resonance (
1
H-NMR) and gel permeation chromatography (GPC). The resulting copolymer was used to prepare poly(vinylidene fluoride) (PVDF) blend membranes via a phase inversion method. The effects of the copolymer on the polymorphism
surface wettability and zeta potential (
ζ
) of the blend membranes were investigated by ATR-FTIR
contact angle instrument and zeta potential analyzer. Scanning electron microscopy (SEM and SEM-EDS) was also applied to investigate the morphology and the surface element changes of the fabricated membranes. The results indicated that P(MMA-
co
-BVIm-Br) copolymer existed on the surface of the membrane which made the blend membrane have a positive surface during the experimental pH range. The copolymer was also in favor of the formation of
β
crystal phase in PVDF membranes. The contact angle experiment indicated that P(MMA-
co
-BVIm-Br) copolymer could switch the wettability of the blend membranes from hydrophilic to hydrophobic by exchanging Br
-
anion with PF
6
-
. Compared with pure PVDF membranes
the water flux and water recovery flux of the blend membranes were enhanced obviously. The results from the flux recovery ratio (FR) and total fouling ratio (
R
t
) all suggested that the blend membranes had good anti-fouling properties.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Viscosity, NMR Diffusometry and Light Scattering Data for Aqueous and Aqueous-Salt Solutions of Poly(1-butyl-3-vinylimidazolium bromide)
Polypropylene Separators with Robust Mussel-inspired Coatings for High Lithium-ion Battery Performances
Preparation and Characterization of UV-absorbing PVDF Membranes via Pre-irradiation Induced Graft Polymerization
Excellent Hydrophilic and Anti-bacterial Fouling PVDF Membrane Based on Ag Nanoparticle Self-assembled PCBMA Polymer Brush
Amino Acids Functionalized Graphene Oxide for Enhanced Hydrophilicity and Antifouling Property of Poly(vinylidene fluoride) Membranes
相关作者
Alexey I. Victorov
Alina S. Koneva
Evgenia A. Safonova
Polina S. Yarchenko
Petr A. Korchak
Chao Zhang
Hong-Qing Liang
Jun-Ke Pi
相关机构
. Petersburg State University, St. Petersburg
Key Laboratory of Macromolecular Synthesis and Functionalization (Ministry of Education), and Key Laboratory of Adsorption and Separation Materials and Technologies of Zhejiang Province, Department of Polymer Science and Engineering, Zhejiang University
Changchun Institute of Applied Chemistry, Chinese Academy of Sciences
University of Science and Technology of China
Institute of Biomedical and Pharmaceutical Technology, Fuzhou University