New Understanding on the Memory Effect of Crystallized iPP
|Updated:2021-06-21
|
New Understanding on the Memory Effect of Crystallized iPP
New Understanding on the Memory Effect of Crystallized iPP
Chinese Journal of Polymer Science2014年32卷第9期 页码:1224-1233
Affiliations:
a.National Synchrotron Radiation Laboratory, College of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026, China
b.Department of Mechanical Engineering, Eindhoven University of Technology, P.O. Box 513, 5600MB, Eindhoven, The Netherlands
c.Department o f Polymer Science and Engineering, CAS Key Lab of Soft Matter Chemistry, University of Science and Technology of China, Hefei 230026, China
Author bio:
**Liang-bin Li (李良彬), E-mail: lbli@ustc.edu.cn
Funds:
China Postdoctoral Science Foundation(2012M521233);Fundamental Research Funds for the Central Universities(WK2310000031);National Natural Science Foundation of China(51033004;51227801;51303166);This work was financially supported by the National Natural Science Foundation of China(51325301);973 program of MOST(2010CB934504)
Xiang-yang Li, Zhe Ma, Feng-mei Su, 等. New Understanding on the Memory Effect of Crystallized iPP[J]. Chinese Journal of Polymer Science, 2014,32(9):1224-1233.
Xiang-yang Li, Zhe Ma, Feng-mei Su, et al. New Understanding on the Memory Effect of Crystallized iPP[J]. Chinese Journal of Polymer Science, 2014, 32(9): 1224-1233. DOI: 10.1007/s10118-014-1502-1.
Xiang-yang Li, Zhe Ma, Feng-mei Su, 等. New Understanding on the Memory Effect of Crystallized iPP[J]. Chinese Journal of Polymer Science, 2014,32(9):1224-1233.DOI: 10.1007/s10118-014-1502-1.
Xiang-yang Li, Zhe Ma, Feng-mei Su, et al. New Understanding on the Memory Effect of Crystallized iPP[J]. Chinese Journal of Polymer Science, 2014, 32(9): 1224-1233. DOI: 10.1007/s10118-014-1502-1.DOI:
New Understanding on the Memory Effect of Crystallized iPP
PP) melted spherulites at 135 ℃ after melting at higher temperatures (170 ℃–176 ℃) were investigated with polarized optical microscopy and Fourier transform infrared spectroscopy. The recovery temperature was fixed to exclude the interference from heterogeneous nuclei. After melting at temperatures between 170 ℃ and 174 ℃
the melted spherulite could recover back to the origin spherulite at low temperatures. Interestingly
a distinct infrared spectrum from iPP melt and crystal was observed in the early stage of recovery process after melting at low temperatures
where only IR bands resulting from short helices with 12 monomers or less can be seen
which indicates that the presence of crystal residues is not the necessary condition for the polymer memory effect. Avrami analysis further indicated that crystallization mainly took place in melted lamellae. After melting at higher temperatures
melted spherulite cannot recover. Based on above findings
it is proposed that the memory effect can be mainly ascribed to melted lamellae
during which crystalline order is lost but conformational order still exists. These conformational ordered segments formed aggregates
which can play as nucleation precursors at low temperatures.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Memory Effect of Crystallization in 1-Butene/α-olefin Copolymers
Simultaneous Enhancement of Toughness and Strength of Stretched iPP Film via Tiny Amount of β-Nucleating Agent under “Shear-free” Melt-extrusion
Advantage of Preserving Bi-orientation Structure of Isotactic Polypropylene through Die Drawing
Isothermal Crystallization of iPP in Environment-friendly Diluents: Effect of Binary Diluents and Crystallization Temperature on Crystallization Kinetics
Enhanced Segment Mobility Promotes Stereocomplex Crystallization in Polymer Blends via Elevated Segmental Miscibility
相关作者
Zhe Ma
Rui-Jun Zhao
Wei Li
Chun-Jing Qv
Xian-Hu Liu
Qian Li
Li-Wei Mi
Chun-Tai Liu
相关机构
Tianjin Key Laboratory of Composite and Functional Materials, and School of Materials Science and Engineering, Tianjin University
National Center for International Joint Research of Micro-Nano Molding Technology, School of Mechanics & Safety Engineering, Zhengzhou University
College of Materials Science and Engineering, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University
College of Material and Chemical Engineering, Henan Key Laboratory of Functional Salt Materials, Center for Advanced Materials Research, Zhongyuan University of Technology
University of Science and Technology of China, School of Applied Chemistry and Engineering