Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide

Ke-rui Guo; Su-yun Xiang; Jiang-bo Sun; Chang-gong Meng

doi:10.1007/s10118-014-1401-5

Your Location：

Home >

Browse articles >

Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide

Updated：2021-06-21

- Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide
- Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide
- Chinese Journal of Polymer Science 2014年32卷第3期页码：315-320
- Affiliations：
  
  Department of Chemistry, Dalian University of Technology, Dalian 116024, China
- Author bio：
  
  *Chang-gong Meng (孟长功), E-mail: cgmeng@dlut.edu.cn
- Funds：
- DOI：10.1007/s10118-014-1401-5
  中图分类号：
- 收稿：2013-05-09，
  
  修回：2013-07-02，
  
  录用：2013-07-04，
  
  纸质出版：2014-03
- Accepted：
Scan QR Code
Ke-rui Guo, Su-yun Xiang, Jiang-bo Sun, 等. Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide[J]. Chinese Journal of Polymer Science, 2014,32(3):315-320.

Ke-rui Guo, Su-yun Xiang, Jiang-bo Sun, et al. Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide[J]. Chinese Journal of Polymer Science, 2014, 32(3): 315-320.
Ke-rui Guo, Su-yun Xiang, Jiang-bo Sun, 等. Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide[J]. Chinese Journal of Polymer Science, 2014,32(3):315-320. DOI： 10.1007/s10118-014-1401-5.

Ke-rui Guo, Su-yun Xiang, Jiang-bo Sun, et al. Effect of GMA Polymer Compatibilizers on Highly Filled Composites of Low Density Polyethylene/Magnesium Hydroxide[J]. Chinese Journal of Polymer Science, 2014, 32(3): 315-320. DOI： 10.1007/s10118-014-1401-5.

摘要

Abstract

Functional polymers such as polyethylene grafted glycidyl methacrylate (PE-

-GMA) and ethylene-methyl acrylate-glycidyl methacrylate terpolymer (E/MA/GMA) were used as compatibilizers in the preparation of highly filled composites of polyethylene/magnesium hydroxide(PE/MH). Comparative studies were performed on the effect of magnesium hydroxide and stearic acid on the interface within polymer and magnesium hydroxide composites. The effect of polymeric compatibilizers on the properties of the composites was studied using tensile and impact tests

torque rheological analysis

differential scanning calorimetry and environmental scanning electron microscopy (ESEM). The microstructure of highly filled PE/MH composites changed after the addition of functional polymers. The mechanical properties of the composite material increased after compatibilization. The compatibilization processes of PE-

-GMA and E/MA/GMA were different. The grafted polymer was more compatible with polyethylene

which led to a polar polymer phase. In contrast

the tercopolymer tended to adhere to the surface of MH particles.

关键词

Keywords

references

浏览量

556

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Modulating Molecular Weight of Polyethylenes from Oligomer to Polymer Using Highly Thermal Stable Cationic α-Diimine Palladium Complexes

Alkyl Alcohol Chain-length Mediated Steric Hindrance at Support Surface in Heterogeneous α-Diimine Ni Catalysts for Modulating Ethylene Polymerization

One-handed Helical Poly(m-terphenyl acetylene)s with Broad Optical Activity Range from Ultraviolet-Visible to Near-infrared Regions

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair