The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization

Alireza Talaei; Faramarz Afshar Taromi; Ahmad Arefazar; Saeid Ahmadjo; Omid Moini Jazani

doi:10.1007/s10118-014-1381-5

Your Location：

Home >

Browse articles >

The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization

Updated：2021-06-21

- The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization
- The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization
- Chinese Journal of Polymer Science 2014年32卷第2期页码：137-142
- Affiliations：
  
  a.Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran
  b.Department of Catalyst, Iran Polymer and Petrochemical Institute (IPPI), Tehran, Iran
  c.Department of Chemical Engineering, College of Engineering, University of Isfahan, Isfahan, Iran
- Author bio：
  
  **Ahmad Arefazar, E-mail: alirezatalaei@yahoo.com
- Funds：
  
  National Iranian Petrochemical Company Research and Technology (NIPC-RT)
- DOI：10.1007/s10118-014-1381-5
  中图分类号：
- 收稿：2013-02-15，
  
  修回：2013-05-09，
  
  录用：2013-05-20，
  
  纸质出版：2014-02
- Accepted：
Scan QR Code
Alireza Talaei, Faramarz Afshar Taromi, Ahmad Arefazar, 等. The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization[J]. Chinese Journal of Polymer Science, 2014,32(2):137-142.

Alireza Talaei, Faramarz Afshar Taromi, Ahmad Arefazar, et al. The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization[J]. Chinese Journal of Polymer Science, 2014, 32(2): 137-142.
Alireza Talaei, Faramarz Afshar Taromi, Ahmad Arefazar, 等. The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization[J]. Chinese Journal of Polymer Science, 2014,32(2):137-142. DOI： 10.1007/s10118-014-1381-5.

Alireza Talaei, Faramarz Afshar Taromi, Ahmad Arefazar, et al. The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization[J]. Chinese Journal of Polymer Science, 2014, 32(2): 137-142. DOI： 10.1007/s10118-014-1381-5.

摘要

Abstract

Ethylene polymerization was carried out by immobilization of

rac

-ethylenebis(1-indenyl)zirconium dichloride (Et(Ind)

ZrCl

) and

rac

-dimethylsilylbis(1-indenyl)zirconium dichloride (Me

Si(Ind)

ZrCl

) preactivated with methylaluminoxane (MAO) on calcinated silica at different temperatures. Polymerizations of ethylene were conducted at different temperatures to find the optimized polymerization temperature for maximum activity of the catalyst. The Me

Si bridge catalyst showed higher activity at the lower polymerization temperature compared to the Et bridge catalyst. The highest catalytic activities were obtained at temperatures about 50 ℃ and 70 ℃ for Me

Si(Ind)

ZrCl

/MAO and Et(Ind)

ZrCl

/MAO catalysts systems

respectively. Inductively coupled plasma-atomic emission spectroscopy results and polymerization activity results confirmed that the best temperature for calcinating silica was about 450 ℃ for both catalysts systems. The melting points of the produced polyethylene were about 130 ℃

which could be attributed to the linear structure of HDPE.

关键词

Keywords

references

浏览量

357

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Influence of Backbone and Axial Substituent of Catalyst on α-Imino-ketone Nickel Mediated Ethylene (Co)Polymerization

Benzosuberyl Substituents as a "Sandwich-like" Function in Olefin Polymerization Catalysis

Ethylene Polymerization and Copolymerization with Polar Monomers by Benzothiophene-bridged BPMO-Pd Catalysts

Advances in Polymer-based Circularly Polarized Luminescent Materials

From Molecular Defect to Macroscopic Performance: Manipulating Dichroism and Mechanics in Iodine-doped Poly(vinyl alcohol) via Ethylene Incorporation