INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS
PAPER|Updated:2023-01-03
|
INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS
INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS
Chinese Journal of Polymer Science2013年31卷第11期 页码:1470-1483
Affiliations:
Key Laboratory of Macromolecule Synthesis and Functionalization, Ministry of Education, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
Author bio:
**Min Zuo (左敏), E-mail: kezuomin@zju.edu.cn
Qiang Zheng (郑强), E-mail: zhengqiang@zju.edu.cn
Funds:
National Natural Science Foundation of China(51003093);Zhejiang Provincial Innovative Research Team(2009R50004);Research Foundation of Education Bureau of Zhejiang Province(Y200908238)
De-zheng Pang, Min Zuo, Ji-shi Zhao, 等. INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS[J]. Chinese Journal of Polymer Science, 2013,31(11):1470-1483. DOI: 10.1007/s10118-013-1356-y.
De-zheng Pang, Min Zuo, Ji-shi Zhao, et al. INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS[J]. Chinese Journal of Polymer Science, 2013, 31(11): 1470-1483. DOI: 10.1007/s10118-013-1356-y.
De-zheng Pang, Min Zuo, Ji-shi Zhao, 等. INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS[J]. Chinese Journal of Polymer Science, 2013,31(11):1470-1483. DOI: 10.1007/s10118-013-1356-y.DOI:
De-zheng Pang, Min Zuo, Ji-shi Zhao, et al. INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS[J]. Chinese Journal of Polymer Science, 2013, 31(11): 1470-1483. DOI: 10.1007/s10118-013-1356-y.DOI:
INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS
The effect of clay on the morphology and phase-separation behavior of poly(methyl methacrylate)/poly(styreneco-acrylonitrile) (PMMA/SAN) blends and the variation of clay dispersion have been investigated. With the evolution of phase separation in PMMA/SAN
most of the clays are first located at the boundaries between PMMA and SAN
and then gradually move to the PMMA-rich domain
owing to the affinity of clay to PMMA. The introduction of clay causes the increase of binodal and spinodal temperatures of PMMA/SAN and enlarges their metastable region
indicating the phase stabilizing effect of clay on the matrix. But the influence of clay on the cloud points obviously depends on the composition of PMMA/SAN. The selective adsorption of PMMA on the clay results in the difference between the composition of surface layer and that of polymer matrix. Hence
the clay plays the role of an agent changing the conditions of phase structure formation.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Effect of Nanoclay on the Phase Separation Behavior of Poly(methyl methacrylate)/Poly(vinyl acetate) Binary Polymer Blends
Poly(vinyl alcohol)/GO-MMT Nanocomposites: Preparation, Structure and Properties
Studies on Crystal Transition of Polyamide 11 Nanocomposites by Variable-temperature X-Ray Diffraction
SYNTHESIS OF EXFOLIATED ISOTACTIC POLYPROPYLENE/FUNCTIONAL ALKYL-TRIPHENYLPHOSPHONIUM-MODIFIED CLAY NANOCOMPOSITES BY IN SITU POLYMERIZATION
TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES: COMPARISON OF DIFFERENT COMPATIBILIZERS
相关作者
Chao-ying Lin
Qiang Zheng
Muhammad Raheel
Kun Yao
Jiang Gong
Xue-cheng Chen
Dong-tao Liu
Yi-chao Lin
相关机构
State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences
Department of Chemistry, Quaid-i-Azam University
Key Laboratory of New Processing Technology for Nonferrous Metals and Materials, Ministry of Education, College of Materials Science and Engineering, Guilin University of Technology
State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University
Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 3 Research Link