DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS
Special Issue: In Memory of Prof. Bingzheng Jiang|Updated:2023-01-03
|
DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS
DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS
Chinese Journal of Polymer Science2013年31卷第9期 页码:1250-1259
Affiliations:
a.Department of Polymer Science and Engineering, University of Massachusetts, Amherst, Massachusetts 01003, USA
b.X-ray Science Division, Argonne National Laboratory, Argonne, Illinois 60439, USA
Author bio:
**Thomas P. Russell, E-mail: russell@mail.pse.umass.edu
Funds:
Department of Energy Office of Basic Energy Science under Contract(DEFG02-96ER45612);NSF-supported Materials Research Science and Engineering Center;NSF-supported Center for Hierarchical Manufacturing at University of Massachusetts Amherst;Use of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy Office of Science by Argonne National Laboratory;U.S. DOE under Contract(DE-AC02-06CH11357);Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract(DE-AC02-05CH11231)
Xin-yu Wei, Wei-yin Gu, Xiao-bo Shen, 等. DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS[J]. Chinese Journal of Polymer Science, 2013,31(9):1250-1259.
Xin-yu Wei, Wei-yin Gu, Xiao-bo Shen, et al. DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS[J]. Chinese Journal of Polymer Science, 2013, 31(9): 1250-1259.
Xin-yu Wei, Wei-yin Gu, Xiao-bo Shen, 等. DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS[J]. Chinese Journal of Polymer Science, 2013,31(9):1250-1259.DOI: 10.1007/s10118-013-1320-x.
Xin-yu Wei, Wei-yin Gu, Xiao-bo Shen, et al. DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS[J]. Chinese Journal of Polymer Science, 2013, 31(9): 1250-1259.DOI: 10.1007/s10118-013-1320-x.
DEVIATIONS FROM BULK MORPHOLOGIES IN THIN FILMS OF BLOCK COPOLYMER/ADDITIVE BINARY BLENDS
Deviations from bulk morphologies in thin films of binary blends of alkyne-functionalized diblock copolymer poly(ethylene oxide)-
block
-poly(
n
-butyl methacrylate-
random
-propargyl methacrylate) (PEO-
b
-P(
n
BMA-
r
-PgMA)) and Rhodamine B azide are reported
where thermal click reaction between the two components leads to microphase separated morphologies. Both in the bulk and in thin films
increasing the azide loading ratio resulted in the transition from a lamellar microdomain morphology to a hexagonally packed cylindrical mircodomain morphology. However
in thin films the lamellae-cylinder transition was observed at a different azide loading ratio
which was determined by film thickness. As a result
significant deviations from the bulk morphology were observed. These results indicate that surface interactions and confined geometry can play an important role in dictating the morphology in thin films of BCP/additive binary blends.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.