SURFACE MODIFICATION OF PVDF POROUS MEMBRANES

Jian-hua Li; Jing Miao; Xi-sheng Shao; You-yi Xu; Qi-qing Zhang

doi:10.1007/s10118-013-1256-1

Your Location：

Home >

Browse articles >

SURFACE MODIFICATION OF PVDF POROUS MEMBRANES

PAPER | Updated：2023-01-03

- SURFACE MODIFICATION OF PVDF POROUS MEMBRANES
- SURFACE MODIFICATION OF PVDF POROUS MEMBRANES
- Chinese Journal of Polymer Science 2013年31卷第7期页码：994-1001
- Affiliations：
  
  a.Institute of Biomedical and Pharmaceutical Technology & College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350001, China
  b.Institute of Polymer Science, Key Laboratory of Macromolecule Synthesis and Functionalization, (Ministry of Education), Zhejiang University, Hangzhou 310027, China
- Author bio：
  
  **You-yi Xu (徐又一), E-mail: opl-yyxu@zju.edu.cn
- Funds：
  
  Natural Science Foundation of Fujian province(2011J01044);973 Program of China(2009CB623402);Scientific Research Foundation in Fuzhou University(2010-XQ-17;022284);Opening Research Foundation of Key Laboratory of Biomedical Material in Tianjin City(00801103);Scientific Major Research Project of Fujian Province(2010NZ0001-1)
- DOI：10.1007/s10118-013-1256-1
  中图分类号：
- 收稿：2012-07-17，
  
  修回：2012-09-11，
  
  录用：2012-09-17，
  
  纸质出版：2013-07
- Accepted：
Scan QR Code
Jian-hua Li, Jing Miao, Xi-sheng Shao, 等. SURFACE MODIFICATION OF PVDF POROUS MEMBRANES[J]. Chinese Journal of Polymer Science, 2013,31(7):994-1001.

Jian-hua Li, Jing Miao, Xi-sheng Shao, et al. SURFACE MODIFICATION OF PVDF POROUS MEMBRANES[J]. Chinese Journal of Polymer Science, 2013, 31(7): 994-1001.
Jian-hua Li, Jing Miao, Xi-sheng Shao, 等. SURFACE MODIFICATION OF PVDF POROUS MEMBRANES[J]. Chinese Journal of Polymer Science, 2013,31(7):994-1001. DOI： 10.1007/s10118-013-1256-1.

Jian-hua Li, Jing Miao, Xi-sheng Shao, et al. SURFACE MODIFICATION OF PVDF POROUS MEMBRANES[J]. Chinese Journal of Polymer Science, 2013, 31(7): 994-1001. DOI： 10.1007/s10118-013-1256-1.

摘要

Abstract

A novel method for the surface modification of PVDF porous membranes was introduced. Styrene-(

-(4-hydroxyphenyl) maleimide) alternating copolymer SHMI-Br was blended with PVDF to fabricate SHMI-Br/PVDF membranes. The C-Br bond on the SHMI-Br/PVDF membrane was served as initial site of ATRP

and P(PEGMA) brush was grafted on the PVDF membrane. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR/FTIR) was used to prove the P(PEGMA) brushes were successfully grafted onto the SHMI-Br/PVDF membrane surface. Introduction of P(PEGMA) brushes on the PVDF membrane surface enhanced the hydrophilicity effectively. When the PEGMA degree of grafting was 16.7 wt%

the initial contact angle of PVDF membrane decreased from 98° to 42°. The anti-fouling ability of PVDF membrane was improved significantly after P(PEGMA) brush was grafted. Taking the PEGMA degree of grafting 16.7 wt% as an example

the flux of protein solution was about 151.21 L/(m

h) when the pH value of the BSA solution was 4.9. As the pH value was increased to 7.4

the flux was changed to 180.06 L/(m

h). However

the protein solution flux of membrane M3 (PEGMA: 0 wt%) was only 73.84 L/(m

h) and 113.52 L/(m

h) at pH 4.9 and 7.4

respectively.

关键词

Keywords

references

浏览量

582

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Amino Acids Functionalized Graphene Oxide for Enhanced Hydrophilicity and Antifouling Property of Poly(vinylidene fluoride) Membranes

An Excellent Biobased Copolymerization Monomer Module: Synthesis of Biobased Copolymers with Excellent Heat Resistance and Hydrophilic Properties

Synthesis and Characterization of α-End Functionalized 3,4-Polyisoprene Using Fe(acac)3/IITP/AliBu3 Catalyst

Layered Gradient-structured Coating with Sustained Lubricating Performance for the Surface Functionalization of Implant Materials

Experimental Investigation of Graphene and TiO2 Reinforced Poly(vinyl alcohol)-based Fiber Metal Laminates