AN IMPRINTED POLYMER FOR REMOVAL OF Cd2+ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN

Taher Alizadeh

doi:10.1007/s10118-011-1082-2

Your Location：

Home >

Browse articles >

AN IMPRINTED POLYMER FOR REMOVAL OF Cd2+ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN

Updated：2021-06-21

- AN IMPRINTED POLYMER FOR REMOVAL OF Cd2+ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN
- AN IMPRINTED POLYMER FOR REMOVAL OF Cd²⁺ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN
- Chinese Journal of Polymer Science 2011年29卷第6期页码：658-669
- Affiliations：
  
  Department of Applied Chemistry, Faculty of Science, University of Mohaghegh Ardabili, Ardabil, Iran
- Author bio：
  
  *Taher Alizadeh, E-mail: Alizadeh@uma.ac.ir
- Funds：
- DOI：10.1007/s10118-011-1082-2
  中图分类号：
- 收稿：2010-11-16，
  
  修回：2011-01-22，
  
  录用：2011-01-26，
  
  纸质出版：2011
- Accepted：
Scan QR Code
Taher Alizadeh. AN IMPRINTED POLYMER FOR REMOVAL OF Cd2+ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN[J]. Chinese Journal of Polymer Science, 2011,29(6):658-669.

Taher Alizadeh. AN IMPRINTED POLYMER FOR REMOVAL OF Cd²⁺ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN[J]. Chinese Journal of Polymer Science, 2011, 29(6): 658-669. DOI: 10.1007/s10118-011-1082-2.
Taher Alizadeh. AN IMPRINTED POLYMER FOR REMOVAL OF Cd2+ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN[J]. Chinese Journal of Polymer Science, 2011,29(6):658-669. DOI： 10.1007/s10118-011-1082-2.

Taher Alizadeh. AN IMPRINTED POLYMER FOR REMOVAL OF Cd²⁺ FROM WATER SAMPLES: OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN[J]. Chinese Journal of Polymer Science, 2011, 29(6): 658-669. DOI: 10.1007/s10118-011-1082-2. DOI：

摘要

Abstract

A new ion-imprinted polymer (IIP) was synthesized by copolymerization of 4-vinylpyridine (monomer)

ethyleneglycoldimethacrylate (cross-linker) and 2

2-azobis-isobutyronitrile (initiator) in the presence of Cd

and quinaldic acid (complexing agent). It was found that the adsorption capacity of IIP and blank polymer were 45.0 and 6.2 mg g

-1

respectively. The relative selectivity coefficients of the imprinted polymer for different binary mixture were also calculated. Compared to non-imprinted polymer (NIP)

the IIP had higher selectivity for Cd(II). The IIP was used as a sorbent for cadmium extraction from water samples by using a simple batch extraction procedure. The effect of different parameters on Cd

extraction and its recovery from the IIP were evaluated and optimized by using experimental design methodology. The optimized adsorption/desorption procedure was applied for cadmium removal from the real water samples. The obtained recoveries proved that this IIP could be used for removal of trace cadmium ions from water samples.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation

Experimental Investigation of Graphene and TiO2 Reinforced Poly(vinyl alcohol)-based Fiber Metal Laminates

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber

Advances in Polymer-based Circularly Polarized Luminescent Materials

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair