Xin-hua Yan, Yan Shi, Lin Wang, 等. POLYMERIZATION OF 1-OCTENE AND DETERMINATION OF MARK-HOUWINK CONSTANTS OF POLY(1-OCTENE)[J]. Chinese Journal of Polymer Science, 2011,29(5):560-568.
Xin-hua Yan, Yan Shi, Lin Wang, et al. POLYMERIZATION OF 1-OCTENE AND DETERMINATION OF MARK-HOUWINK CONSTANTS OF POLY(1-OCTENE)[J]. Chinese Journal of Polymer Science, 2011, 29(5): 560-568.
Xin-hua Yan, Yan Shi, Lin Wang, 等. POLYMERIZATION OF 1-OCTENE AND DETERMINATION OF MARK-HOUWINK CONSTANTS OF POLY(1-OCTENE)[J]. Chinese Journal of Polymer Science, 2011,29(5):560-568.DOI: 10.1007/s10118-011-1069-z.
Xin-hua Yan, Yan Shi, Lin Wang, et al. POLYMERIZATION OF 1-OCTENE AND DETERMINATION OF MARK-HOUWINK CONSTANTS OF POLY(1-OCTENE)[J]. Chinese Journal of Polymer Science, 2011, 29(5): 560-568.DOI: 10.1007/s10118-011-1069-z.
POLYMERIZATION OF 1-OCTENE AND DETERMINATION OF MARK-HOUWINK CONSTANTS OF POLY(1-OCTENE)
The polymerization of 1-octene initiated by methylalumoxane (MAO)-activated Ni(II)-based-
α
-diimine complexes [(2
6-
i
-Pr)
2
C
6
H
3
-DAB(An)]NiBr
2
was investigated. Using this catalyst
poly(1-octene)s with molecular weight between 100 × 10
3
and 400 × 10
3
and polydispersity (
M
w
/
M
n
) between 1.3 and 1.5 were synthesized successfully by varying reaction time at room temperature. The poly(1-octene)s were amorphous polymers and could be well soluble in tetrahydrofuran (THF). After fractional precipitation
poly(1-octene)s with narrow molecular weight distributions (
M
w
/
M
n
≤ 1.12) were obtained. Their weight-average molecular weights were measured by gel permeation chromatography (GPC) in conjunction with online model BI-MwA multiangle laser light scattering (MALLS)
and their intrinsic viscosities were measured by Maron’s single-point method. The
k
and
α
values in Mark-Houwink equation [
η
] =
KM
α
in THF at 40℃ were 0.089 mL/g and 0.61 respectively.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Manipulating Hierarchical Aggregation Structure via Film-forming Kinetics Enables Organic Photovoltaics over 20% Efficiency
Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers
Alternating Poly(ether-alt-ester)s with High Glass Transition Temperature Enabled by Rotationally Constrained Biaryl Units
Molecularly Engineered Polyimide Films with Switchable Cavitation for Bidirectional Passive Thermal Regulation
Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber