MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE

Chang-jiang You a; Jin-guo Xu a; Yi-zheng Zeng a; Yao Li a; De-min Jia a; Toshio Nishi b

doi:10.1007/s10118-010-9173-z

Your Location：

Home >

Browse articles >

MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE

Papers | Updated：2021-06-21

- MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE
- MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE
- 高分子科学（英文版） 2010年28卷第6期页码：913-922
- Affiliations：
- Author bio：
- Funds：
- DOI：10.1007/s10118-010-9173-z
  中图分类号：
- 纸质出版：2010-09-20
- Accepted：
Scan QR Code
Chang-jiang You a, Jin-guo Xu a, Yi-zheng Zeng a, 等. MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE[J]. 高分子科学（英文版）, 2010,28(6):913-922.

Chang-jiang You a, Jin-guo Xu a, Yi-zheng Zeng a, et al. MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE[J]. 2010, 28(6): 913-922.
Chang-jiang You a, Jin-guo Xu a, Yi-zheng Zeng a, 等. MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE[J]. 高分子科学（英文版）, 2010,28(6):913-922. DOI： 10.1007/s10118-010-9173-z.

Chang-jiang You a, Jin-guo Xu a, Yi-zheng Zeng a, et al. MORPHOLOGY AND PERFORMANCE OF UNSATURATED POLYESTER NANOCOMPOSITES MODIFIED WITH ORGANOCLAY AND THERMOPLASTIC POLYURETHANE[J]. 2010, 28(6): 913-922. DOI： 10.1007/s10118-010-9173-z.

摘要

Unsaturated polyester (UPR)/thermoplastic polyurethane (TPU)/organoclay nanocomposites were prepared by melt compounding of thermoplastic polyurethane and unsaturated polyester prepolymer

and then mixing with the hybrids of styrene monomers and organoclay at ambient temperature. The crosslinking reaction eventually occurred through the unsaturated polyester prepolymer and styrene monomer. The morphology of the composites was investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the impact strength of UPR/TPU/organoclay nanocomposites increases obviously; the cure shrinkage decreases markedly

the glass transition temperature is enhanced and an elastic response to the deformation is prominent at the temperature above 10oC.

Abstract

Unsaturated polyester (UPR)/thermoplastic polyurethane (TPU)/organoclay nanocomposites were prepared by melt compounding of thermoplastic polyurethane and unsaturated polyester prepolymer

the glass transition temperature is enhanced and an elastic response to the deformation is prominent at the temperature above 10oC.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation

Alternating Poly(ether-alt-ester)s with High Glass Transition Temperature Enabled by Rotationally Constrained Biaryl Units

pH-Responsive L-Cysteine-conjugated Polydopamine Nanocarriers for Controlled Release of Emamectin Benzoate against Pieris brassicae

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

End-to-End Neuron-inspired Signal Transduction Using Organic Electrochemical Transistors