STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION

Zhao-hui Jiang; Chang-fa Xiao; Xue Wang; Xiao-yu Hu

doi:10.1007/s10118-010-9115-9

Your Location：

Home >

Browse articles >

STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION

Papers | Updated：2021-06-21

- STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION
- STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION
- 高分子科学（英文版） 2010年28卷第5期页码：721-729
- Affiliations：
- Author bio：
- Funds：
- DOI：10.1007/s10118-010-9115-9
  中图分类号：
- 纸质出版：2010-09-20
- Accepted：
Scan QR Code
Zhao-hui Jiang, Chang-fa Xiao, Xue Wang, 等. STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION[J]. 高分子科学（英文版）, 2010,28(5):721-729.

Zhao-hui Jiang, Chang-fa Xiao, Xue Wang, et al. STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION[J]. 2010, 28(5): 721-729.
Zhao-hui Jiang, Chang-fa Xiao, Xue Wang, 等. STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION[J]. 高分子科学（英文版）, 2010,28(5):721-729. DOI： 10.1007/s10118-010-9115-9.

Zhao-hui Jiang, Chang-fa Xiao, Xue Wang, et al. STRUCTURE AND PERFORMANCE OF POLYAMIDE-6 MEMBRANES PREPARED BY THERMALLY INDUCED PHASE SEPARATION[J]. 2010, 28(5): 721-729. DOI： 10.1007/s10118-010-9115-9.

摘要

The asymmetric polyamide-6 (PA6) membranes were prepared by thermally induced phase separation. From the scanning electron microscopy (SEM) images

it is observed that with the increase of silicon dioxide (SiO2) content the structure of obtained membranes gradually varied from cellular structure to large ball-shaped cluster aggregates. Subsequently

with the addition of SiO2

pure water flux increased first and then decreased

while rejection showed the opposite trend. Besides

raising the coagulation bath temperature was favorable to increase pure water flux. Consequently

different membrane morphologies and performance were obtained by changing SiO2 content and coagulation bath temperature.

Abstract

The asymmetric polyamide-6 (PA6) membranes were prepared by thermally induced phase separation. From the scanning electron microscopy (SEM) images

with the addition of SiO2

pure water flux increased first and then decreased

while rejection showed the opposite trend. Besides

raising the coagulation bath temperature was favorable to increase pure water flux. Consequently

different membrane morphologies and performance were obtained by changing SiO2 content and coagulation bath temperature.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Highly Regio- and trans-Selective Ring-opening Metathesis Polymerization of Chiral Aza-norbornene with a Simple Phenylimido-Tungsten Catalyst

Circularly Polarized Luminescence Based on Helical Polymers: Structure-Property Relationships and Regulation Mechanisms

Epoxy-functionalized Cyclohexane-based Ricinoleate Plasticizer: Synthesis, Performance Evaluation, and Plasticizing Mechanism

Manipulating Hierarchical Aggregation Structure via Film-forming Kinetics Enables Organic Photovoltaics over 20% Efficiency

A Paradigm for BF3 Co-initiated Cationic Polymerization with Low Dispersity: Introducing Acetonitrile and Lowering the Reaction Temperature