EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES

Zhong-bin Xu a; Wei-wei Kong a; Ming-xing Zhou a; Mao Peng a

doi:10.1007/s10118-010-9111-0

Your Location：

Home >

Browse articles >

EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES

Papers | Updated：2021-06-21

- EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES
- EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES
- 高分子科学（英文版） 2010年28卷第4期页码：615-624
- Affiliations：
- Author bio：
- Funds：
- DOI：10.1007/s10118-010-9111-0
  中图分类号：
- 纸质出版：2010-07-20
- Accepted：
Scan QR Code
Zhong-bin Xu a, Wei-wei Kong a, Ming-xing Zhou a, 等. EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES[J]. 高分子科学（英文版）, 2010,28(4):615-624.

Zhong-bin Xu a, b, Wei-wei Kong a, et al. EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES[J]. 2010, 28(4): 615-624.
Zhong-bin Xu a, Wei-wei Kong a, Ming-xing Zhou a, 等. EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES[J]. 高分子科学（英文版）, 2010,28(4):615-624. DOI： 10.1007/s10118-010-9111-0.

Zhong-bin Xu a, b, Wei-wei Kong a, et al. EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES[J]. 2010, 28(4): 615-624. DOI： 10.1007/s10118-010-9111-0.

摘要

This study investigated the influence of various organically modified montmorillonites (organoclays) on the structure and properties of rigid polyurethane foam (RPUF) nanocomposites. The organoclays were modified with cetyltrimethyl ammonium bromide (CTAB)

methyl tallow bis(2-hydroxyethyl) quaternary ammonium chloride (MT2ETOH) and tris(hydroxymethyl)aminomethane (THMA) and denoted as CMMT

Cloisite 30B and OMMT

respectively. MT2ETOH and THMA contain hydroxyl groups

while THMA does not have long aliphatic tail in its molecule. X-ray diffraction and transmission electron microscopy show that OMMT and Cloisite 30B can be partially exfoliated in the RPUF nanocomposites because their intercalating agents MT2ETOH and THMA can react with isocyanate. However

CMMT modified with nonreactive CTAB is mainly intercalated in the RPUF matrices. At a relatively low filler content

the RPUF/CMMT composite foam has a higher specific compressive strength (the ratio of compressive strength against the apparent density of the foams)

while at relatively high filler contents

RPUF/Cloisite 30B and RPUF/OMMT composites have higher specific compressive strengths

higher modulus and more uniform pore size than the RPUF/CMMT composite.

Abstract

methyl tallow bis(2-hydroxyethyl) quaternary ammonium chloride (MT2ETOH) and tris(hydroxymethyl)aminomethane (THMA) and denoted as CMMT

Cloisite 30B and OMMT

respectively. MT2ETOH and THMA contain hydroxyl groups

CMMT modified with nonreactive CTAB is mainly intercalated in the RPUF matrices. At a relatively low filler content

the RPUF/CMMT composite foam has a higher specific compressive strength (the ratio of compressive strength against the apparent density of the foams)

while at relatively high filler contents

RPUF/Cloisite 30B and RPUF/OMMT composites have higher specific compressive strengths

higher modulus and more uniform pore size than the RPUF/CMMT composite.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements

Epoxy-functionalized Cyclohexane-based Ricinoleate Plasticizer: Synthesis, Performance Evaluation, and Plasticizing Mechanism

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber

Two-way Shape Memory Effect of Polycaprolactone-based Polyurethane via Synergistic Role of Hydrogen Bonding and Crystallization Tuned by Malic Acid

A Paradigm for BF3 Co-initiated Cationic Polymerization with Low Dispersity: Introducing Acetonitrile and Lowering the Reaction Temperature