PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES

Mei Zhang a; Chun-fang Zhang a; Zhi-kan Yao a; Jun-li Shi a; Bao-ku Zhu a; You-yi Xu a

doi:10.1007/s10118-010-9022-0

Your Location：

Home >

Browse articles >

PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES

Papers | Updated：2021-06-21

- PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES
- PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES
- 高分子科学（英文版） 2010年28卷第3期页码：337-346
- Affiliations：
- Author bio：
- Funds：
- DOI：10.1007/s10118-010-9022-0
  中图分类号：
- 纸质出版：2010-05-20
- Accepted：
Scan QR Code
Mei Zhang a, Chun-fang Zhang a, Zhi-kan Yao a, 等. PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES[J]. 高分子科学（英文版）, 2010,28(3):337-346.

Mei Zhang a, b, Chun-fang Zhang a, et al. PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES[J]. 2010, 28(3): 337-346.
Mei Zhang a, Chun-fang Zhang a, Zhi-kan Yao a, 等. PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES[J]. 高分子科学（英文版）, 2010,28(3):337-346. DOI： 10.1007/s10118-010-9022-0.

Mei Zhang a, b, Chun-fang Zhang a, et al. PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES[J]. 2010, 28(3): 337-346. DOI： 10.1007/s10118-010-9022-0.

摘要

High density polyethylene (HDPE)/polyethylene-block-poly(ethylene glycol) (PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation (TIPS) process using diphenyl ether (DPE) as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry (DSC). By varying the content of PE-b-PEG

the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis

Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Water contact angle

static protein adsorption and water flux experiments were used to evaluate the hydrophilicity

antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content

the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly

PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation

but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity

protein absorption resistance and water permeation properties

which would be substantially beneficial to HDPE membranes for water treatment application.

Abstract

Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Water contact angle

static protein adsorption and water flux experiments were used to evaluate the hydrophilicity

the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly

PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation

but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity

protein absorption resistance and water permeation properties

which would be substantially beneficial to HDPE membranes for water treatment application.

关键词

Keywords

references

浏览量

528

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Multiple-Responsive Chiral Hydrogels from Helical Dendronized Poly(phenylacetylene)s

Sequence-encoded Conformation Pathways in Viscoelastic Microphase Separation of Multiblock Copolymers

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber

A Paradigm for BF3 Co-initiated Cationic Polymerization with Low Dispersity: Introducing Acetonitrile and Lowering the Reaction Temperature

Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements