NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX

Bijayashree Samal; Prafulla K.Sahoo

Your Location：

Home >

Browse articles >

NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX

Note | Updated：2021-06-21

- NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX
- NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX
- 高分子科学（英文版） 2007年第2期页码：145-152
- Affiliations：
  
  1.   Department of Chemistry Utkal University
  2.   Vani Vihar
  3.   Bhubaneswar 751004
  4.   India
- Author bio：
- Funds：
- DOI：
  中图分类号： TQ316.334
- 纸质出版：2007
- Accepted：
Scan QR Code
[1]Bijayashree Samal,Prafulla K.Sahoo.NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX[J].Chinese Journal of Polymer Science,2007(02):145-152.

NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX[J]. 2007, (2): 145-152.
[1]Bijayashree Samal,Prafulla K.Sahoo.NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX[J].Chinese Journal of Polymer Science,2007(02):145-152. DOI：

NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX[J]. 2007, (2): 145-152. DOI：

摘要

<正>Nano-sized polyacrylonitrile （PAN） particles were prepared under the catalytic effect of in situ developed CoCl2/EDTA complex with ammonium persulfate as the initiator in the absence of any added emulsifier. The emulsion polymerization was studied at varying concentrations of the initiator

monomer

complex and solvent over a temperature range of 30-70℃. The overall activation energy （Ea

49.79 kJ/mol）

energy of dissociation of initiator （Ed

82.68 kJ/mol）

number of micelles （0.163×1018） and the viscosity average molecular weight of the polymer were computed. The distribution of particle sizes was determined by transmission electron microscopy （TEM）. It was found that the oil-in-water polymerization was stabilized by the presence of the CoCl2/EDTA in situ complex reducing the particle size into the nano order. The average diameters of PAN nano particles

obtained by TEM

were in the range of 50-150 nm at the maximum conversion. The experimental particle size was mainly dependent on the concentration of the complex and temperature.

Abstract

Nano-sized polyacrylonitrile （PAN） particles were prepared under the catalytic effect of in situ developed CoCl2/EDTA complex with ammonium persulfate as the initiator in the absence of any added emulsifier. The emulsion polymerization was studied at varying concentrations of the initiator

monomer

complex and solvent over a temperature range of 30-70℃. The overall activation energy （Ea

49.79 kJ/mol）

energy of dissociation of initiator （Ed

82.68 kJ/mol）

obtained by TEM

were in the range of 50-150 nm at the maximum conversion. The experimental particle size was mainly dependent on the concentration of the complex and temperature.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Squaramide-directed Cooperative One-dimensional Assembly in Telechelic Polydimethylsiloxane for Hierarchical Network Formation

2026-9 Contents

Durable Anti-fogging and Abrasion-resistant Coatings Based on Polyoxometalates-Hydrophilic Resin Composites with Enhanced Cohesion and Adhesion

Sequence-encoded Conformation Pathways in Viscoelastic Microphase Separation of Multiblock Copolymers

End-group and Side-chain Dual-engineering of Selenium-fused Acceptors for 20.08% Efficiency Polymer Solar Cells with Low Energy Loss