MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE

Mian Zhou; Yi Fu; Wen Xu; Xi Xu

Your Location：

Home >

Browse articles >

MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE

Papers | Updated：2021-06-21

- MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE
- MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE
- 高分子科学（英文版） 2005年23卷第1期页码：17-21
- Affiliations：
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2005-01-20
- Accepted：
Scan QR Code
Mian Zhou, Yi Fu, Wen Xu, 等. MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE[J]. 高分子科学（英文版）, 2005,23(1):17-21.

Mian Zhou, Yi Fu, Wen Xu, et al. MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE[J]. 2005, 23(1): 17-21.
Mian Zhou, Yi Fu, Wen Xu, 等. MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE[J]. 高分子科学（英文版）, 2005,23(1):17-21. DOI：

Mian Zhou, Yi Fu, Wen Xu, et al. MECHANICAL PROPERTIES OF OZONIZED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE[J]. 2005, 23(1): 17-21. DOI：

摘要

The mechanical properties of ozonized high density polyethylene (HDPE) blended with sericite-tridymite-cristobalite (STC) were studied in this paper. The experimental results show that some oxygen containing polar groups are introduced on the molecular chain of HDPE through ozonization

the compatibility between HDPE and STC is thus improved

the mechanical properties of the blend are markedly enhanced. Compared with untreated HDPE/STC (60/40) blend

the yield strength and notched impact strength of ozonized HDPE/STC (60/40) blend are increased from 27.0 MPa to 29.5 MPa and from 2.8 kJ/m2 to 13.3 kJ/m2

respectively

the notched impact strength is close to that of HDPE (13.6 kJ/m2)

the yield strength is in excess of 3.9 MPa of that of HDPE. The yield strength and notched impact strength will be further increased to 30.7 MPa and 32.4 kJ/m2 in case the ozonized HDPE is blended with STC pretreated with silane coupling agent.

Abstract

the compatibility between HDPE and STC is thus improved

the mechanical properties of the blend are markedly enhanced. Compared with untreated HDPE/STC (60/40) blend

the yield strength and notched impact strength of ozonized HDPE/STC (60/40) blend are increased from 27.0 MPa to 29.5 MPa and from 2.8 kJ/m2 to 13.3 kJ/m2

respectively

the notched impact strength is close to that of HDPE (13.6 kJ/m2)

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Highly Regio- and trans-Selective Ring-opening Metathesis Polymerization of Chiral Aza-norbornene with a Simple Phenylimido-Tungsten Catalyst

Topology-regulated Co-assembly of Single Chain Polymer Nanoparticles and Block Copolymers into Hierarchical Micelle@Vesicle Composite Structures

On-demand Peelable UV-curable Adhesives with Superior Bonding Strength: Rational Molecular Engineering of Cohesion-adhesion Synergy

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber

Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements