STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*

Your Location：

Home >

Browse articles >

STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*

Papers | Updated：2021-06-21

- STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*
- STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*
- 高分子科学（英文版） 2001年19卷第1期页码：45-51
- Affiliations：
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2001-02-20
- Accepted：
Scan QR Code
STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*[J]. 高分子科学（英文版）, 2001,19(1):45-51.

STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*[J]. 2001, 19(1): 45-51.
STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*[J]. 高分子科学（英文版）, 2001,19(1):45-51. DOI：

STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION*[J]. 2001, 19(1): 45-51. DOI：

摘要

Urethane acrylate anionomer (APUA) as a kind of new type polymerizable emulsifier was synthesized using 2

4-toluene diisocyanate (TDI)

polypropylene glycol (PPG)

2-hydroxyethyl methacrylate (HEMA) and dimethylolpropionic acid (DMPA). The critical micelle concentration (CMC) of APUA was measured by the methods of conductance and surface tension. The comparative studies between polymerizable emulsifier AUPA and conventional emulsifier sodium dodecyl sulfate (SDS) were carried out in the emulsion polymerization of methyl methacrylate (MMA). Polymerization kinetics

stability

size and morphology of the latex particles were investigated. It was found that in APUA both water soluble initiator potassium persulfate (KPS) and oil soluble initiator 2

2'-azobisisobutyronitrile (AIBN) can start the reaction of MMA

and the polymerization rate and yield were very high. On using AIBN as an initiator

the conversion-time behavior of MMA with APUA as emulsifier was different to that of SDS as emulsifier

signifying a different nucleation mechanism of the polymer latex particle. The average size of the two kinds of particles is about 50 nm. The particle size decreases with increasing emulsifier concentration. On using KPS as the initiator

APUA as emulsifier

cross-linking hydrogel of PMMA would be formed

but SDS was used as emulsifier and the hydrogel of PMMA was not present.

Abstract

Urethane acrylate anionomer (APUA) as a kind of new type polymerizable emulsifier was synthesized using 2

4-toluene diisocyanate (TDI)

polypropylene glycol (PPG)

stability

size and morphology of the latex particles were investigated. It was found that in APUA both water soluble initiator potassium persulfate (KPS) and oil soluble initiator 2

2'-azobisisobutyronitrile (AIBN) can start the reaction of MMA

and the polymerization rate and yield were very high. On using AIBN as an initiator

the conversion-time behavior of MMA with APUA as emulsifier was different to that of SDS as emulsifier

APUA as emulsifier

cross-linking hydrogel of PMMA would be formed

but SDS was used as emulsifier and the hydrogel of PMMA was not present.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Special Topic: Chirality in Polymers

2026-9 Contents

Alternating Poly(ether-alt-ester)s with High Glass Transition Temperature Enabled by Rotationally Constrained Biaryl Units

Epoxy-functionalized Cyclohexane-based Ricinoleate Plasticizer: Synthesis, Performance Evaluation, and Plasticizing Mechanism

Molecularly Engineered Polyimide Films with Switchable Cavitation for Bidirectional Passive Thermal Regulation