The synthesis of pseudo- and semi-interpenetrating polymer networks (IPNs) based on poly-dimethylsiloxane (PDMS) and polystyrene (PS) is described. IPNs were obtained by simultaneous and in situsequential synthesis procedure. The preliminary studies on IPNs properties such as transition temperature
microphase separation and mechanical behaviors have been carried out by using differential scanningcalorimetry (DSC) and scanning electron microscopy (SEM). The experimental evidence clearly showed thatsemi-IPNs obtained by sequential synthesis procedure have higher interpenetrating extent than pseudo-IPNs synthesized by simultaneous procedure.Over the full composition
the PDMS/PS IPNs are immiscible.The pseudo-IPNs microphase separation can be greatly subdued through are formation of grafting bonds between two networks as well as the kinetic rate-matching of the individual network crosslinking.
Abstract
The synthesis of pseudo- and semi-interpenetrating polymer networks (IPNs) based on poly-dimethylsiloxane (PDMS) and polystyrene (PS) is described. IPNs were obtained by simultaneous and in situsequential synthesis procedure. The preliminary studies on IPNs properties such as transition temperature
microphase separation and mechanical behaviors have been carried out by using differential scanningcalorimetry (DSC) and scanning electron microscopy (SEM). The experimental evidence clearly showed thatsemi-IPNs obtained by sequential synthesis procedure have higher interpenetrating extent than pseudo-IPNs synthesized by simultaneous procedure.Over the full composition
the PDMS/PS IPNs are immiscible.The pseudo-IPNs microphase separation can be greatly subdued through are formation of grafting bonds between two networks as well as the kinetic rate-matching of the individual network crosslinking.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Epoxy-functionalized Cyclohexane-based Ricinoleate Plasticizer: Synthesis, Performance Evaluation, and Plasticizing Mechanism
Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers
On-demand Peelable UV-curable Adhesives with Superior Bonding Strength: Rational Molecular Engineering of Cohesion-adhesion Synergy
Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives
Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation