INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*

FENG Zhiliu; 董丽松; 张伯兰; 方正; 杨永宽; DONG Lisong; ZHANG Bolan; FANG Zheng; YANG Yongkuan

Your Location：

Home >

Browse articles >

INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*

Papers | Updated：2021-06-21

- INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*
- INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*
- 高分子科学（英文版） 1985年3卷第3期页码：216-225
- Affiliations：
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：1985-09-20
- Accepted：
Scan QR Code
FENG Zhiliu, 董丽松, 张伯兰, 等. INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*[J]. 高分子科学（英文版）, 1985,3(3):216-225.

FENG Zhiliu, DONG Lisong, ZHANG Bolan, et al. INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*[J]. 1985, 3(3): 216-225.
FENG Zhiliu, 董丽松, 张伯兰, 等. INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*[J]. 高分子科学（英文版）, 1985,3(3):216-225. DOI：

FENG Zhiliu, DONG Lisong, ZHANG Bolan, et al. INVESTIGATION OF PP-EPR DIBLOCK COPOLYMER AS COMPATIBILIZER FOR PP/EPT BLEND*[J]. 1985, 3(3): 216-225. DOI：

摘要

Blending isotactic polypropylene (PP) with ethylene-propylene terpolymer (EPT) is one of thesimplest and most effective ways for toughening PP. In order to further improve the toughness ofPP/EPT blend and to enhance the stability of the dispersed rubber phase

a diblock copolymer com-posed of PP and ethylene-propylene rubber blocks (PP-EPR) was added into the blend

as it is con-sidered that "forced compatibility" of the two components will be effected through the two chemi-cally bonded blocks

while two-phase structure still remains.Experimental results indicate that PP-EPR is an effective compatibilizer for PP/EPT blend.It not only increases the toughness of the blend

but also decreases the loss of tensile strengths usually accompanying the toughening of plastics with an elastomer

which is very well explained by the mor-phological structure changes when an appropriate amount of PP-EPR was added into the blend.

Abstract

a diblock copolymer com-posed of PP and ethylene-propylene rubber blocks (PP-EPR) was added into the blend

as it is con-sidered that "forced compatibility" of the two components will be effected through the two chemi-cally bonded blocks

while two-phase structure still remains.Experimental results indicate that PP-EPR is an effective compatibilizer for PP/EPT blend.It not only increases the toughness of the blend

but also decreases the loss of tensile strengths usually accompanying the toughening of plastics with an elastomer

which is very well explained by the mor-phological structure changes when an appropriate amount of PP-EPR was added into the blend.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Manipulating Hierarchical Aggregation Structure via Film-forming Kinetics Enables Organic Photovoltaics over 20% Efficiency

Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements

Sliding Dynamics of Ring Chain on a Rod-Coil Block Copolymer in Rotaxane

Topology-regulated Co-assembly of Single Chain Polymer Nanoparticles and Block Copolymers into Hierarchical Micelle@Vesicle Composite Structures

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport