THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*
Papers|Updated:2021-06-21
|
THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*
THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*
高分子科学(英文版)1984年2卷第1期 页码:78-81
Affiliations:
Author bio:
Funds:
DOI:
中图分类号:
纸质出版:1984-07-20
Accepted:
Scan QR Code
NI Shaoru, TANG Xuerning. THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*[J]. 高分子科学(英文版), 1984,2(1):78-81.
NI Shaoru, TANG Xuerning. THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*[J]. 1984, 2(1): 78-81.
NI Shaoru, TANG Xuerning. THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*[J]. 高分子科学(英文版), 1984,2(1):78-81.DOI:
NI Shaoru, TANG Xuerning. THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*[J]. 1984, 2(1): 78-81.DOI:
THE MOLECULAR WEIGHT AND ITS DISTRIBUTION OF 1, 2-POLYBUTADIENES PREPARED WITH MOLYBDENUM CATALYST SYSTEMS*
The study on the molecular weight and its distribution of 1
2-polybutadienes prepared with MoCl4OR-i-Bu2AlOR' catalyst systems has been carded out by viscosity and GPC methods. 1
2-Polybutadienes with Mw/Mn=1.2-2.0can be obtained with these catalyst systems at 30—70℃. There is a linear relation between theMw/Mn and the polymerization temperature. It was found by extrapolation that these catalyst systems may possibly initiate a living polymerization at the temperature near 18℃. The molecular weight of the polymers can be regulated either by polymerization temperature or by adding polar compounds such as allyl halides.
Abstract
The study on the molecular weight and its distribution of 1
2-polybutadienes prepared with MoCl4OR-i-Bu2AlOR' catalyst systems has been carded out by viscosity and GPC methods. 1
2-Polybutadienes with Mw/Mn=1.2-2.0can be obtained with these catalyst systems at 30—70℃. There is a linear relation between theMw/Mn and the polymerization temperature. It was found by extrapolation that these catalyst systems may possibly initiate a living polymerization at the temperature near 18℃. The molecular weight of the polymers can be regulated either by polymerization temperature or by adding polar compounds such as allyl halides.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Two-way Shape Memory Effect of Polycaprolactone-based Polyurethane via Synergistic Role of Hydrogen Bonding and Crystallization Tuned by Malic Acid
Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation
Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers
Experimental Investigation of Graphene and TiO2 Reinforced Poly(vinyl alcohol)-based Fiber Metal Laminates
Advances in Polymer-based Circularly Polarized Luminescent Materials