Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/<italic style="font-style: italic">meta</italic>-Methoxystyrene Copolymers

Hui Tian; Chun-Ji Wu; Bao-Li Wang

doi:10.1007/s10118-026-3707-5

Your Location：

Home >

Browse articles >

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

RESEARCH ARTICLE | Updated：2026-08-31

- Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers
- Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers
- Chinese Journal of Polymer Science 2026年44卷第9期页码：3212-3222
- Affiliations：
  
  a.State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
  b.School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei 230026, China
- Author bio：
  
  wang@ciac.ac.cn
- Funds：
  
  This work was financially supported by the National Natural Science Foundation of China (Nos. 52273017 and 52273016) and the Natural Science Foundation of Jilin Province (No. SKL202302033).;A Chinese patent application (CN 202410955660.9) was submitted by B.W., Z.Z., H.T., D.C., and B.L., which covered the synthesis of related HDPE/E-mMOS blend materials. The other authors have no competing interests to declare.Data supporting the findings of this study are available from the corresponding author upon reasonable request.
- DOI：10.1007/s10118-026-3707-5
  中图分类号：
- 收稿：2026-02-26，
  
  修回：2026-03-31，
  
  录用：2026-04-07，
  
  网络首发：2026-07-20，
  
  纸质出版：2026-09-05
- Accepted：
Scan QR Code
Tian, H.; Wu, C. J.; Wang, B. L. Upgrading commercially available polyethylene to high-value materials with strong mechanical performance and hydrophilicity by blending with ethylene/meta-methoxystyrene copolymers. Chinese J. Polym. Sci. 2026, 44, 3212–3222

Hui Tian, Chun-Ji Wu, Bao-Li Wang. Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers[J]. Chinese Journal of Polymer Science, 2026, 44(9): 3212-3222. DOI: 10.1007/s10118-026-3707-5.
Tian, H.; Wu, C. J.; Wang, B. L. Upgrading commercially available polyethylene to high-value materials with strong mechanical performance and hydrophilicity by blending with ethylene/meta-methoxystyrene copolymers. Chinese J. Polym. Sci. 2026, 44, 3212–3222 DOI： 10.1007/s10118-026-3707-5.

Hui Tian, Chun-Ji Wu, Bao-Li Wang. Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers[J]. Chinese Journal of Polymer Science, 2026, 44(9): 3212-3222. DOI: 10.1007/s10118-026-3707-5. DOI：

摘要

High-density polyethylene (HDPE) materials blending with E-

MOS copolymers at low adding ratios (2 wt%

5 wt% and 10 wt%) were prepared. These blends exhibited increasing tensile strength and toughness

as well as improved surface hydrophilicity. DSC and rheological measurements confirmed good processability.

Abstract

Upgrading commercially available polyethylene to have both higher mechanical properties and surface hydrophilicity is of fundamental interest and practical importance

but the actual results usually suffer from a trade-off between mechanical performance and surface hydrophilicity. Herein

we report the preparation of eighteen high-density polyethylene (HDPE) blend materials

via

the simple physical blending with hydrophilic ethylene/

关键词

Keywords

references

Bhasney, S. M.; Mondal, K.; Kumar, A.; Katiyar, V. Effect of microcrystalline cellulose [MCC ] fibres on the morphological and crystalline behaviour of high density polyethylene [HDPE ] /polylactic acid [PLA ] blends. Compos. Sci. Technol. 2020 , 187 , 107941..

Geyer, R.; Jambeck, J. R.; Law, K. L. Production, use, and fate of all plastics ever made. Sci. Adv. 2017 , 3 , e1700782..

Xu, Z.; Munyaneza, N. E.; Zhang, Q.; Sun, M.; Posada, C.; Venturo, P.; Rorrer, N. A.; Miscall, J.; Sumpter, B. G.; Liu, G. Chemical upcycling of polyethylene, polypropylene, and mixtur es to high-value surfactants. Science 2023 , 381 , 666−671..

[Desai, S. M.; Singh, R. P. Surface modification of polyethylene. In Long Term Properties of Polyolefins , Springer: Berlin, 2004 ; pp. 231-294..

Moreno-Serna, V.; Ubilla, M.; Montoille, L.; Saavedra, M.; Corrales, T.; Muñoz, L.; Zapata, P. A. Influence of modified SiO 2 nanoparticles on the photostability of recycled HDPE. J. Polym. Environ. 2024 , 32 , 2045−2058..

Wu, W. L.; Wang, Y. W. High density polyethylene film toughened with polypropylene and linear low density polyethylene. Mater. Lett. 2019 , 257 , 126689..

Boscoletto, A. B.; Franco, R.; Scapin, M.; Tavan, M. An investigation on rheological and impact behaviour of high density and ultra high molecular weight polyethylene mixtures. Eur. Polym. J. 1997 , 33 , 97−105..

Lim, K. L. K.; Ishak, Z. A. M.; Ishiaku, U. S.; Fuad, A. M. Y.; Yusof, A. H.; Czigany, T.; Pukanszky, B.; Ogunniyi, D. S. High-density polyethylene/ultrahigh-molecula r-weightpolyethylene blend. I. The processing, thermal, and mechanical properties. J. Appl. Polym. Sci. 2005 , 97 , 413−425..

Guimarães, M. J. O. C.; Coutinho, F. M. B.; Rocha, M. C. G.; Garcia, M. E. F. Preparation and characterization of blends of high density polyethylene and poly(ethylene- co -1-octene) elastomer. J. Appl. Polym. Sci. 2001 , 81 , 1991−1995..

Guimarães, M. J. O. C.; Coutinho, F. M. B.; Rocha, M. C. G.; Farah, M.; Bretas, R. E. S. Rheological and morphological properties of high-density polyethylene and poly(ethylene–octene) blends. J. Appl. Polym. Sci. 2002 , 86 , 2240−2246..

Dabeesa, S.; Tirth, V.; Mohamed, A.; Kamel, B. M. Wear performance and mechanical properties of MWCNT/HDPE nanocomposites for gearing applications. J. Mater. Res. Technol. 2020 , 12 , 2476−2488..

Hammami, D.; Khlif, M.; Tounsi, F.; Bradai, C. Effect of maleic anhydride–grafted polypropylene coupling agent on mechanical properties of HDPE composites filled with grape leaves fiber. Biomass Convers. Bior. 2024 , 14 , 15251−15263..

Laria, J. G.; Gaggino, R.; Kreiker, J.; Peisino, L. E.; Positieri, M.; Cappelletti, A. Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components. J. Thermoplast. Compos. Mater. 2023 , 36 , 418−431..

Lins, S. A. B.; Rocha, M. C. G.; d’Almeida, J. R. M. Mechanical and thermal properties of high-density polyethylene/alumina/glass fiber hybrid composites. J. Thermoplast. Compos. Mater. 2019 , 32 , 1566−1581..

Stürzel, M.; Mihan, S.; Mülhaupt, R. From multisite polymerization catalysis to sustainable materials and all-polyolefin composites. Chem. Rev. 2016 , 116 , 1398−1433..

Wang, F.; Yu, J.; Liu, L.; Xue, P.; Chen, K. Influence of high-density polyethylene content on the rheology, crystal structure, and mechanical properties of melt spun ultra-high-molecular weight polyethylene/ high-density polyethylene blend fibers. J. Ind. Text. 2023 , 53 , 1−21..

Yamada, K.; Takeda, S.; Hirata, M. Autogestion of polyethylene plates by the photoinduced grafting of meth acrylamide. ACS Symp. Ser. 2003 , 847 , 511−521..

Zhang, M. Q.; Rong, M. Z.; Zhang, H. B.; Friedrich, K. Mechanical properties of low nano-silica filled high density polyethylene composites. Polym. Eng. Sci. 2003 , 43 , 490−500..

Chen, J.; Wang, G.; Zeng, X.; Zhao, H.; Cao, D.; Yun, J.; Tan, C. K. Toughening of polypropylene–ethylene copolymer with nanosized CaCO 3 and styrene–butadiene–styrene. J. Appl. Polym. Sci. 2004 , 94 , 796−802..

Li, H.; Xie, X. M. Polyolefin-functionalized graphene oxide and its GO/HDPE nanocomposite with excellent mechanical properties. Chin. Chem. Lett. 2018 , 29 , 161−165..

Wang, Y.; Lu, L.; Hao, Y.; Wu, Y.; Li, Y. Mechanical and processing enhancement of a recycled HDPE/PPR-based double-wall corrugated pipe via a POE- g -MAH/CaCO 3 /HDPE polymer composite. ACS Omega 2021 , 6 , 19705−19716..

Dorigato, A.; D’Amato, M.; Pegoretti, A. Thermo-mechanical properties of high density polyethylene-fumed silica nanocomposites: effect of filler surface area and treatment. J. Polym. Res. 2012 , 19 , 9889..

Li, T. T.; Cheng, S. B.; Feng, L. F.; Gu, X. P.; Duan, J. T.; Jiang, M. Z.; Zhang, C. L. A review on the free radical graftingof vinyl monomers onto polyethylene and polypropylene by reactive extrusion. Chem. Eng. Sci. 2023 , 278 , 118916..

Qu, X.; Wirsén, A.; Olander, B.; Albertsson, A. C. Surface modification of high density polyethylene tubes by coating chitosan, chitosan hydrogel and heparin. Polym. Bull. 2001 , 46 , 223−229..

Wang, H.; Brown, H. R. Atomic force microscopy study of the photografting of glycidyl methacrylate onto HDPE and the microstructure of the grafted chains. Polymer 2007 , 48 , 477−487..

Wang, H.; Brown, H. R.; Li, Z. Aliphatic ketones/water/alcohol as a new photoinitiating system for the photografting of methacrylic acid onto high-density polyethylene. Polymer 2007 , 48 , 939−948..

Xu, Y.; Fang, Z.; Tong, L. On promoting intercalation and exfoliation of bentonite in high-density polyethylene by grafting acrylic acid. J. Appl. Polym. Sci. 2005 , 96 , 2429−2434..

Álvarez, E. N. C.; Ramos-deValle, L. F.; Sánchez-Valdes, S.; Ramírez-Vargas, E.; Espinoza-Martinez, A. B.; Rodriguez-Fernandez, O. S.; Beltran-Ramırez, F. I.; Nonell, J. M.; Sanchez-Cuevas, J. L. Study of the effect of a polymeric compatibilizing agent on the flame retardancy and tensile properties of high density polyethylene/magnesium hydroxide compositions. Macromol. Symp. 2017 , 374 , 1600116..

Filippi, S.; Marazzato, C.; Magagnini, P.; Famulari, A.; Arosio, P.; Meille, S. V. Structure and morphology of HDPE- g -MA/organoclay nanocomposites: effects of the preparation procedures. Eur. Polym. J. 2008 , 44 , 987−1002..

Heinen, W.; Rosenmöller, C. H.; Wenzel, C. B.; Groot, H. J. M. d.; Lugtenburg, J.; Duin, M. V. 13 C NMR study of the grafting of maleic anhydride onto polyethene, polypropene, and ethene−propene copolymers. Macromolecules 1996 , 29 , 1151−1157..

Pötschke, P.; Wallheinke, K.; Stutz, H. Blends of thermoplastic polyurethane and maleic-anhydride grafted polyethylene. I: Morphology and mechanical properties. Polym. Eng. Sci. 2004 , 39 , 1035−1048..

Spencer, M. W.; Cui, L.; Yoo, Y.; Paul, D. R. Morphology and properties of nanocomposites based on HDPE/HDPE- g -MA blends. Polymer 2010 , 51 , 1056−1070..

Charoenpongpool, S.; Nithitanakul, M.; Grady, B. P. Melt-neutralization of maleic anhydride grafted on high-density polyethylene compatibilizer for polyamide-6/high-density polyethylene blend: effect of neutralization level on compatibility of the blend. Polym. Bull. 2012 , 70 , 293−309..

Diop, M. F.; Torkelson, J. M. Ester functionalization of polypropylene via controlled decomposition of benzoyl peroxide during solid-state shear pulverization. Macromolecules 2013 , 46 , 7834−7844..

Jahani, Y.; Sadat Hosseini, F.; Goudarzian, N. Rheology and morphology of polypropylene in situ grafted and blended with methyl methacrylate/ n -buthylacrylate copolymer. J. Vinyl. Addit. Techn. 2015 , 21 , 290−298..

Gao, J.; Cai, W.; Hu, Y.; Chen, C. Improving the flame retardancy of polyethylenes through the palladium-catalyzed incorporation of polar comonomers. Polym. Chem. 2019 , 10 , 1416−1422..

Wang, W.; Chen, M.; Pang, W.; Li, Y.; Zou, C.; Chen, C. Palladium-catalyzed synthesis of norbornene-based polar-functionalized polyolefin elastomers. Macromolecules 2021 , 54 , 3197−3203..

Zhang, J.; Mao, X.; Ma, Z.; Pan, L.; Wang, B.; Li, Y. High-performance polyethylene-ionomer-based thermoplastic elastomers exhibiting counteranion-mediated mechanical properties. Macromolecules 2023 , 56 , 4219−4230..

Yang, Q.; Kang, X.; Liu, Y.; Mu, H.; Jian, Z. Ultrahigh molecular weight ethylene–acrylate copolymers synthesized with highly active neutral nickel catalysts. Angew. Chem. Int. Ed. 2025 , 64 , e202421904.

Tian, H.; Wang, Y.; Wu, C.; Wang, B. A compatibilizing strategy forupcycling polyethylene and polystyrene with ethylene/(phenyl functionalized α -olefin) copolymers containing continuous comonomer segments. Macromolecules 2024 , 57 , 6275−6283..

Tian, H.; Wu, C.; Wang, B.; Cui, D. Synthesis of hydrophilic thermoplastic elastomer with outstanding mechanical properties via the copolymerization of ethylene and methoxystyrene. Macromolecules 2025 , 58 , 6844−6853..

Hossain, A.; Rajput, P.; Li, Z.; Soldatov, A. V.; Mukhanova, E. A.; Rodriguez, C. Y. C. Engineering bioinspiredmicrofluidics; biomimetic self-healing/cleaning coating designs and unique advanced materials. Chem. Eng. J. 2024 , 489 , 151336..

Selim, M. S.; El-Safty, S. A.; Shenashen, M. A.; Higazy, S. A.; Elmarakbi, A. Progress in biomimetic leverages for marine antifouling using nanocomposite coatings. J. Mater. Chem. B 2020 , 8 , 3701−3732..

Zou, C.; Wang, Q.; Si, G.; Chen, C. A co-anchoring strategy for the synthesis of polar bimodal polyethylene. Nat. Commun. 2023 , 14 , 1442..

Dai, S.; Chen, C. Palladium-catalyzed direct synthesis of various branched, carboxylic acid-functionalized polyolefins: characterization, derivatization, and properties. Macromolecules 2018 , 51 , 6818−6824..

Feng, Y.; Jin, X.; Hay, J. N. Crystallization, melting behavior, and morphology of B PP/HDPE blend. J. Appl. Polym. Sci. 1998 , 69 , 2469−2475..

Koning, C.; Duin, M. V.; Pagnoulle, C.; Jerome, R. Strategies for compatibilization of polymer blends. Prog. Polym. Sci. 1998 , 23 , 707−757..

Gahleitner, M. Melt rheology of polyolefins. Prog. Polym. Sci. 2001 , 26 , 895−944..

Cassagnau, P.; Bounor-Legaré, V.; Fenouillot, F. Reactive processing of thermoplastic polymers: a review of the fundamental aspects. Int. Polym. Process. 2007 , 22 , 218−258..

Mirabedini, S. M.; Jamali, S. S.; Haghayegh, M.; Sharifi, M.; Mirabedini, A. S.; Hashemi-Nasab, R. Application of mixture experimental design to optimize formulation and performance of thermoplastic road markings. Prog. Org. Coat. 2012 , 75 , 549−559..

Li, J.; Ma, P. L.; Favis, B. D. The role of the blend interface type on morphology in cocontinuous polymer blends. Macromolecules 2002 , 35 , 2005−2016..

Shahbazi, K.; Aghjeh, M. K. R.; Abbasi, F.; Meran, M. P.; Mazidi, M. M. Rheology, morphology and tensile properties of reactive compatibilized polyethylene/polystyrene blends via Friedel–Crafts alkylation reaction. Polym. Bull. 2012 , 69 , 241−259..

Chen, X.; Li, C.; Ding, Y.; Li, Y.; Li, J.; Sun, L.; Wei, J.; Wei, X.; Wang, H.; Zhang, K.; Pan, L.; Li, Y. Fully bio-based and supertough PLA blends via a novel interlocking strategy combining strong dipolar interactions and stereocomplexation. Macromolecules 2022 , 55 , 5864−5878..

Wang, H.; Ren, J.; Gao, G.; Chen, S.; Wang, J.; Yang, S. Effect of compatibilization on reciprocating frictional behavior of polyamide 66/UHMWPE blends. Tribol. Trans. 2016 , 59 , 560−568..

Li, Y.; He, H.; Ma, Y.; Geng, Y.; Tan, J. Rheological and mechanical properties of ultrahigh molecular weight polyethylene/high density polyethylene/polyethylene glycol blends. Adv. Ind. Eng. Polym. Res. 2019 , 2 , 51−60..

Lee, S. H.; Kontopoulou, M.; Park, C. B. Effect of nanosilica on the co-continuous morphology of polypropylene/polyolefin elastomer blend s. Polymer 2010 , 51 , 1147−1155..

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Modulating Molecular Weight of Polyethylenes from Oligomer to Polymer Using Highly Thermal Stable Cationic α-Diimine Palladium Complexes

“Bridging” Structure Polymer Strategy for Morphology Regulation and Performance Optimization of Organic Solar Cells Based on the Ternary-component Polymer

Synthesis and Properties of Poly(ethylene succinate)-b-poly(butylene carbonate) Multiblock Copolymers

Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives

Tunable Circularly Polarized Luminescence of Helical Poly(phenylacetylene)s via Side-chain-to-Backbone Förster Resonance Energy Transfer

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

DOI：10.1007/s10118-026-3707-5

摘要

Abstract

关键词

Keywords

references