Phase Structure Formed by Rubber and Rigid Particles in a Polymer and Its Effect on the Composite Rigidity and Toughness

Zong-Lin Jiang; Hang-Hang Qi; Meng-Meng Zhang; Yun-Bao Gao; Jing Jin; Wei Jiang

doi:10.1007/s10118-026-3781-8

Your Location：

Home >

Browse articles >

Phase Structure Formed by Rubber and Rigid Particles in a Polymer and Its Effect on the Composite Rigidity and Toughness

RESEARCH ARTICLE | Updated：2026-08-24

- Phase Structure Formed by Rubber and Rigid Particles in a Polymer and Its Effect on the Composite Rigidity and Toughness
- Chinese Journal of Polymer Science Vol. 44, Pages: 1-8(2026)
- Affiliations：
  
  College of Materials Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Key Laboratory of Textile Fiber and Products of Ministry of Education, Wuhan Textile University, Wuhan 430200, China
- Author bio：
  
  ybgao@wtu.edu.cn (Y.B.G.)
  jjin@wtu.edu.cn (J.J.)
  weijiang@wtu.edu.cn (W.J.)
- Funds：
- DOI：10.1007/s10118-026-3781-8
  CLC：
- Received：11 May 2026，
  
  Accepted：10 June 2026，
  
  Online First：22 August 2026，
  
  Published：2026-07
- Accepted：
Scan QR Code
Jiang, Z. L.; Qi, H. H.; Zhang, M. M.; Gao, Y. B.; Jin, J.; Jiang, W. Phase structure formed by rubber and rigid particles in a polymer and its effect on the composite rigidity and toughness. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-026-3781-8

Zong-Lin Jiang, Hang-Hang Qi, Meng-Meng Zhang, et al. Phase Structure Formed by Rubber and Rigid Particles in a Polymer and Its Effect on the Composite Rigidity and Toughness[J/OL]. Chinese Journal of Polymer Science, 2026, 441-8.
Jiang, Z. L.; Qi, H. H.; Zhang, M. M.; Gao, Y. B.; Jin, J.; Jiang, W. Phase structure formed by rubber and rigid particles in a polymer and its effect on the composite rigidity and toughness. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-026-3781-8 DOI：

Zong-Lin Jiang, Hang-Hang Qi, Meng-Meng Zhang, et al. Phase Structure Formed by Rubber and Rigid Particles in a Polymer and Its Effect on the Composite Rigidity and Toughness[J/OL]. Chinese Journal of Polymer Science, 2026, 441-8. DOI： 10.1007/s10118-026-3781-8.

摘要

Abstract

Various phase structures can be formed by rubber and rigid particles in a polymer. Which is more beneficial to the impact toughness and rigidity

as well as their balance. This has been unclear until now. In this study

polymer composites with typical three-phase structures

that is

hard core-soft shell particles

soft core-hard shell particles

and two types of separated particles

were studied theoretically. The calculated results indicate that the soft core-hard shell structure is the best

for enhancing the modulus in these three-phase structures

whereas the hard core-soft shell structure is the worst. On the other hand

both core-shell structures are beneficial for enhancing toughness

whereas the two types of particle-separated structures are not. These theoretical results are supported by the experimental results for polypropylene (PP)

ethylene-propylene-diene monomer (EPDM) rubber

and SiO

composites.

关键词

Keywords

references

Sharma, A.; Joshi, S. C. Effect of core-shell micro-fillers on impact performance and damage progression in bi-directional carbon thermoplastic composites. Compos. Part B Eng. 2025 , 293 , 112127..

Zuiderduin, W. C. J.; Huétink, J.; Gaymans, R. J. Rigid particle toughening of aliphatic polyketone. Polymer 2006 , 47 , 5880−5887..

Lule, Z.; Kim, J. Thermally conductive and highly rigid polylactic acid (PLA) hybrid composite filled with surface treated alumina/nano-sized aluminum nitride. Compos. Part A Appl. Sci. Manuf. 2019 , 124 , 105506..

Wee, J.-W.; Chudnovsky, A.; Choi, B.-H. Brittle–ductile transitions of rubber toughened polypropylene blends: a review. Int. J. Precis. Eng. Manuf. Green Technol. 2024 , 11 , 1361−1402..

Wang, J.; Zhang, X.; Jiang, L.; Qiao, J. Advances in toughened polymer materials by structured rubber particles. Prog. Polym. Sci. 2019 , 98 , 101160..

Gao, Y.; Jiang, Z.; Zhang, J.; Tan, H.; Jin, J.; Jiang, W. Models and theories regarding the brittle-ductile transition of rubber-toughened thermoplastics and their application in the design of high-impact polymer composites with balanced toughness and rigidity. Polym. Sci. Technol. 2025 , 1 , 314−329..

Shangguan, Y.; Chen, F.; Yang, J.; Jia, E.; Zheng, Q. A new approach to fabricate polypropylene alloy with excellent low-temperature toughness and balanced toughness-rigidity through unmatched thermal expansion coefficients between components. Polymer 2017 , 112 , 318−324..

Corté, L.; Rebizant, V.; Hochstetter, G.; Tournilhac, F.; Leibler, L. Toughening with little stiffness loss: polyamide filled with ABC triblock copolymers. Macromolecules 2006 , 39 , 9365−9374..

Shirvanimoghaddam, K.; Balaji, K. V.; Yadav, R.; Zabihi, O.; Ahmadi, M.; Adetunji, P.; Naebe, M. Balancing the toughness and strength in polypropylene composites. Compos. Part B Eng. 2021 , 223 , 109121..

Fasihi, M.; Mansouri, H. Effect of rubber interparticle distance distribution on toughening behavior of thermoplastic polyolefin elastomer toughened polypropylene. J. Appl. Polym. Sci. 2016 , 133 , app.44068..

Zuiderduin, W. C. J.; Westzaan, C.; Huétink, J.; Gaymans, R. J. Toughening of polypropylene with calcium carbonate particles. Polymer 2003 , 44 , 261−275..

Li, Z.; Shen, J.; Ma, H.; Liu, F.; Yu, W.; Shangguan, Y.; Zheng, Q. Effect of partially crosslinked nanoparticle cluster networks in dispersed rubber phase on the toughness and stiffness of polypropylene composites. Compos. Part B Eng. 2025 , 304 , 112669..

Rouhi, E.; Bahrami, K.; Poorabdollah, M. Remarkable enhancement of physical-mechanical properties in unsaturated polyester resin composites using SiO 2 @ CTBN hybrid particles. Polym. Compos. 2025 , 46 , 10908−10922..

Zou, M.; Chen, J.; Wei, Z.; Lei, W.; You, J.; Liu, J.; Zhang, Q.; Shi, D. Preparation of SiO 2 @EVA core–shell particles via post-emulsification method with polydisperse SiO 2 particle sizes and the critical thickness-to-diameter ratio in PA6/SiO 2 @EVA system. Appl. Surf. Sci. 2023 , 614 , 156051..

Hajibabazadeh, S.; Razavi Aghjeh, M. K.; Palahang, M. Study on the fracture toughness and deformation micro-mechanisms of PP/EPDM/SiO 2 ternary blend-nanocomposites. J. Compos. Mater. 2020 , 54 , 591−605..

Jancar, J. ; Zidek, J. Effect of in-situ formed core–shell inclusions on the mechanical properties and impact fracture of polypropylene. Eur. Polym. J. 2015 , 71 , 221−230..

Yang, L.; Hu, Y.; Guo, H.; Song, L.; Chen, Z.; Fan, W. Toughening and reinforcement of rigid PVC with silicone rubber/nano-CACO 3 shell-core structured fillers. J. Appl. Polym. Sci. 2006 , 102 , 2560−2567..

Dubnikova, I. L.; Berezina, S. M.; Antonov, A. V. The effect of morphology of ternary-phase polypropylene/glass bead/ethylene-propylene rubber composites on the toughness and brittle-ductile transition. J. Appl. Polym. Sci. 2002 , 85 , 1911−1928..

Wang, X.; Gao, Y.; Jin, J.; Jiang, W. A strategy to develop homo-polypropylene composites with high impact and high rigidity. Macromolecules 2024 , 57 , 4576−4583..

Yang, H.; Zhang, Q.; Guo, M.; Wang, C.; Du, R.; Fu, Q. Study on the phase structures and toughening mechanism in PP/EPDM/SiO 2 ternary composites. Polymer 2006 , 47 , 2106−2115..

Hajibabazadeh, S.; Razavi Aghjeh, M. K.; Mazidi, M. M. Processing–microstructure–fracture toughness relationships in PP/EPDM/SiO 2 blend-nanocomposites: effect of mixing sequence. Polym. Eng. Sci. 2024 , 64 , 2513−2529..

Ji, X.-L.; Jing, J.-K.; Jiang, W.; Jiang, B.-Z. Tensile modulus of polymer nanocomposites. Polym. Eng. Sci. 2002 , 42 , 983−993..

Takayanagi, M.; Uemura, S.; Minami, S. Application of equivalent model method to dynamic rheo-optical properties of crystalline polymer. J. Polym. Sci., C Polym. Symp. 1964 , 5 , 113−122..

Mokhtari Dizaji, S.; Katbab, A. A.; Hajibabazadeh, S. Role of interfacial compatibilizer and functionality of rubber phase on micromorphology development and mechanical properties of PP/EPDM/nanosilica ternary nanocomposite. Polym. Bull. 2023 , 80 , 1353−1368..

Yang, J.; Li, F.; Guan, C.; Xu, X.; Zhong, L.; Gao, Y.; Han, Y.; Yan, N.; Zhao, G.; Jiang, W. Brittle-ductile transition of impact PP blends: effect of modulus ratio of PP matrix to impact modifier. Polym. Bull. 2023 , 80 , 4459−4471..

Borggreve, R. J. M.; Gaymans, R. J.; Schuijer, J. Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomer. Polymer 1989 , 30 , 71−77..

Jiang, W.; An, L.; Jiang, B. Brittle–tough transition in elastomer toughening thermoplastics: effects of the elastomer stiffness. Polymer 2001 , 42 , 4777−4780..

Li, C.; Wang, Z.; Liu, W.; Ji, X.; Su, Z. Copolymer distribution in core–shell rubber particles in high-impact polypropylene investigated by atomic force microscopy–infrared. Macromolecules 2020 , 53 , 2686−2693..

Li, F.; Gao, Y.; Zhang, C.; Jin, J.; Ji, X.; Zhang, Y.; Zhang, X.; Jiang, W. Design of high impact thermal plastic polymer composites with balanced toughness and rigidity: effect of matrix polymer molecular weight. Polymer 2020 , 208 , 122957..

Wu, S. Phase structure and adhesion in polymer blends: a criterion for rubber toughening. Polymer 1985 , 26 , 1855−1863..

Borggr eve, R. J. M.; Gaymans, R. J. Impact behaviour of nylon-rubber blends: 4. Effect of the coupling agent, maleic anhydride. Polymer 1989 , 30 , 63−70..

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Synergistic Effects of Poly(propylene carbonate) Content and Pre-stretching on the Strength, Toughness, and Heat Resistance of Polylactide/Poly(propylene carbonate) Blends

Multifunctional Polyurethane with High Strength, Toughness, and Self-healing Capacity via Tannic Acid-modified Cellulose Nanocrystals

High-performance Polydimethylsiloxane Composites Based on Ordered Three-dimensional PVA-MMT Aerogel Network: Network Structure Regulation and Mechanical Enhancement Mechanism

Influence of Salt on Swelling and Modulus of Polyelectrolyte Gels

Evolutionary Characteristics of Linear Free-radical Polymerization Behavior under Gradient Condition

Related Author

Gao-Fei Zheng

Li-Jing Han

Tian-Yi Ma

Jun-Jia Bian

Jin-Liang Lin

Yan Zhao

Hong-Wei Pan

Ze-Peng Wang

Related Institution

School of Applied Chemistry and Engineering, University of Science and Technology of China

State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

Ganzhou Key Laboratory of Ecological Polymer and New Energy Materials, School of Intelligent Manufacturing and Materials Engineering, Gannan University of Science and Technology

Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Chemistry, Southwest Jiaotong University

Institute of Chemical Materials, China Academy of Engineering Physics

⁰